Showing papers on "Orthogonal frequency-division multiplexing published in 2003"

Transmit power adaptation for multiuser OFDM systems

Abstract: In this paper, we develop a transmit power adaptation method that maximizes the total data rate of multiuser orthogonal frequency division multiplexing (OFDM) systems in a downlink transmission. We generally formulate the data rate maximization problem by allowing that a subcarrier could be shared by multiple users. The transmit power adaptation scheme is derived by solving the maximization problem via two steps: subcarrier assignment for users and power allocation for subcarriers. We have found that the data rate of a multiuser OFDM system is maximized when each subcarrier is assigned to only one user with the best channel gain for that subcarrier and the transmit power is distributed over the subcarriers by the water-filling policy. In order to reduce the computational complexity in calculating water-filling level in the proposed transmit power adaptation method, we also propose a simple method where users with the best channel gain for each subcarrier are selected and then the transmit power is equally distributed among the subcarriers. Results show that the total data rate for the proposed transmit power adaptation methods significantly increases with the number of users owing to the multiuser diversity effects and is greater than that for the conventional frequency-division multiple access (FDMA)-like transmit power adaptation schemes. Furthermore, we have found that the total data rate of the multiuser OFDM system with the proposed transmit power adaptation methods becomes even higher than the capacity of the AWGN channel when the number of users is large enough.

Multi-Carrier and Spread Spectrum Systems

Abstract: From the Publisher: Frequency spectrum is a limited and valuable resource for wireless communications. A good example can be observed among network operators in Europe for the prices to pay for UMTS-frequency bands. Therefore, the first goal when designing future wireless communication systems (e.g. 4G - fourth generation) has to be the increase in spectral efficiency. The development in digital communications in the past years has enabled efficient modulation and coding techniques for robust and spectral efficient data, speech, audio and video transmission. These are the multi-carrier modulation (e.g. OFDM) and the spread spectrum technique (e.g. DS-CDMA), where OFDM was chosen for broadcast applications (DVB, DAB) as well as for broadband wireless indoor standards (ETSI HIPERLAN-II, IEEE-802.11) and the DS-CDMA was selected in mobile communications (IS-95, third generation mobile radio systems world wide, UMTS/IMT 2000). Since 1993 various combinations of multi-carrier (MC) modulation and the spread spectrum (SS) technique have been introduced and the field of MC-SS communications has become an independent and important research topic with increasing activities. New application fields have been proposed such as high rate cellular mobile, high rate wireless indoor and LMDS. It has been shown that MC-SS offers the high spectral efficiency, robustness and flexibility that is required for the next generation systems. Meanwhile, different alternative hybrid schemes such as OFDM/OFDMA, MC-TDMA, etc. have been deeply analysed and adopted in different international standards (ETSI-BRAN, IEEE-802 & MMAC). Multi-Carrier & Spread-Spectrum: Analysis of Hybrid Air Interfaces draws together all ofthe above mentioned hybrid schemes therefore providing a greatly needed resource for system engineers, telecommunication designers and researchers in order to enable them to develop, build and deploy several schemes based on MC-transmission for the next generation systems (which will be an integration of broadband multimedia services covering both 4G mobile and fixed wireless systems). Offers a complete treatment of multi-carrier, spread-spectrum (SS) and time division multiplexing (TDM) techniquesProvides an in-depth insight into hybrid multiple access techniques based on multi-carrier (MC) transmissionPresents numerous hybrid multiple access and air interface architectures including OFDM/CDMA, MC-CDMA, MC-DS-CDMA and MT-CDMACovers new techniques such as space-time coding and software radio Telecommunications engineers, hardware & software system designers and researchers as well as students, lecturers and technicians will all find this an invaluable addition to their bookshelf.

PAR reduction in OFDM via active constellation extension

Abstract: The high peak-to-average power ratio (PAR) in orthogonal frequency division multiplexing (OFDM) modulation systems can significantly reduce power efficiency and performance. Methods exist which alter or introduce new signal constellations to combat large signal peaks. We present a new PAR-reduction method that dynamically extends outer constellation points in active (data-carrying) channels, within margin-preserving constraints, in order to minimize the peak magnitude. This scheme simultaneously decreases the bit error rate slightly while substantially reducing the peak magnitude of an OFDM transmit block. Furthermore, there is no loss in data rate and, unlike other methods, no side information is required. PAR reduction for an approximated analog signal is considered, and about a 4.6 dB reduction at a 10/sup -5/ symbol-clip probability is obtained for 256-channel QPSK OFDM. The results show great promise for use in commercial systems.

Optimal training design for MIMO OFDM systems in mobile wireless channels

Abstract: This paper describes a least squares (LS) channel estimation scheme for multiple-input multiple-output (MIMO) orthogonal frequency division multiplexing (OFDM) systems based on pilot tones. We first compute the mean square error (MSE) of the LS channel estimate. We then derive optimal pilot sequences and optimal placement of the pilot tones with respect to this MSE. It is shown that the optimal pilot sequences are equipowered, equispaced, and phase shift orthogonal. To reduce the training overhead, an LS channel estimation scheme over multiple OFDM symbols is also discussed. Moreover, to enhance channel estimation, a recursive LS (RLS) algorithm is proposed, for which we derive the optimal forgetting or tracking factor. This factor is found to be a function of both the noise variance and the channel Doppler spread. Through simulations, it is shown that the optimal pilot sequences derived in this paper outperform both the orthogonal and random pilot sequences. It is also shown that a considerable gain in signal-to-noise ratio (SNR) can be obtained by using the RLS algorithm, especially in slowly time-varying channels.

MIMO WLAN system

Abstract: A multiple-access MIMO WLAN system that employs MIMO, OFDM, and TDD. The system (1) uses a channel structure with a number of configurable transport channels, (2) supports multiple rates and transmission modes, which are configurable based on channel conditions and user terminal capabilities, (3) employs a pilot structure with several types of pilot (e.g., beacon, MIMO, steered reference, and carrier pilots) for different functions, (4) implements rate, timing, and power control loops for proper system operation, and (5) employs random access for system access by the user terminals, fast acknowledgment, and quick resource assignments. Calibration may be performed to account for differences in the frequency responses of transmit/receive chains at the access point and user terminals. The spatial processing may then be simplified by taking advantage of the reciprocal nature of the downlink and uplink and the calibration.

OFDM and MC-CDMA for Broadband Multi-User Communications, WLANs and Broadcasting

Abstract: From the Publisher: Orthogonal frequency-division multiplexing (OFDM) is a method of digital modulation in which a signal is split into several narrowband channels at different frequencies. CDMA is a form of multiplexing, which allows numerous signals to occupy a single transmission channel, optimising the use of available bandwidth. Multiplexing is sending multiple signals or streams of information on a carrier at the same time in the form of a single, complex signal and then recovering the separate signals at the receiving end. Multi-Carrier (MC) CDMA is a combined technique of Direct Sequence (DS) CDMA (Code Division Multiple Access) and OFDM techniques. It applies spreading sequences in the frequency domain. Wireless communications has witnessed a tremendous growth during the past decade and further spectacular enabling technology advances are expected in an effort to render ubiquitous wireless connectivity a reality. This technical in-depth book is unique in its detailed exposure of OFDM, MIMO-OFDM and MC-CDMA. A further attraction of the joint treatment of these topics is that it allows the reader to view their design trade-offs in a comparative context. Divided into three main parts: Part I provides a detailed exposure of OFDM designed for employment in various applications Part II is another design alternative applicable in the context of OFDM systems where the channel quality fluctuations observed are averaged out with the aid of frequency-domain spreading codes, which leads to the concept of MC-CDMA Part III discusses how to employ multiple antennas at the base station for the sake of supporting multiple users in the uplink Portrays theentire body of knowledge currently available on OFDMProvides the first complete treatment of OFDM, MIMO(Multiple Input Multiple Output)-OFDM and MC-CDMAConsiders the benefits of channel coding and space time coding in the context of various application examples and features numerous complete system design examplesConverts the lessons of Shannon's information theory into design principles applicable to practical wireless systemsCombines the benefits of a textbook with a research monograph where the depth of discussions progressively increase throughout the book This all-encompassing self-contained treatment will appeal to researchers, postgraduate students and academics, practising research and development engineers working for wireless communications and computer networking companies and senior undergraduate students and technical managers.

A robust timing and frequency synchronization for OFDM systems

Abstract: A robust symbol-timing and carrier-frequency synchronization scheme applicable to orthogonal frequency-division-multiplexing systems is presented. The proposed method is based on a training symbol specifically designed to have a steep rolloff timing metric. The proposed timing metric also provides a robust sync detection capability. Both time domain training and frequency domain (FD) training are investigated. For FD training, maintaining a low peak-to-average power ratio of the training symbol was taken into consideration. The channel estimation scheme based on the designed training symbol was also incorporated in the system in order to give both fine-timing and frequency-offset estimates. For fine frequency estimation, two approaches are presented. The first one is based on the suppression of the interference introduced in the frequency estimation process by the training symbol pattern in the context of multipath dispersive channels. The second one is based on the maximum likelihood principle and does not suffer from any interference. A new performance measure is introduced for timing estimation, which is based on the plot of signal to timing-error-induced average interference power ratio against the timing estimate shift. A simple approach for finding the optimal setting of the timing estimator is presented. Finally, the sync detection, timing estimation, frequency estimation, and bit-error-rate performance of the proposed method are presented in a multipath Rayleigh fading channel.

Computationally efficient bandwidth allocation and power control for OFDMA

Abstract: The paper studies the problem of finding an optimal subcarrier and power allocation strategy for downlink communication to multiple users in an orthogonal-frequency-division multiplexing-based wireless system. The problem of minimizing total power consumption with constraints on bit-error rate and transmission rate for users requiring different classes of service is formulated and simple algorithms with good performance are derived. The problem of joint allocation is divided into two steps. In the first step, the number of subcarriers that each user gets is determined based on the users' average signal-to-noise ratio. The algorithm is shown to find the distribution of subcarriers that minimizes the total power required when every user experiences a flat-fading channel. In the second stage of the algorithm, it finds the best assignment of subcarriers to users. Two different approaches are presented, the rate-craving greedy algorithm and the amplitude-craving greedy algorithm. A single cell with one base station and many mobile stations is considered. Numerical results demonstrate that the proposed low complexity algorithms offer comparable performance with an existing iterative algorithm.

Optimal training for block transmissions over doubly selective wireless fading channels

Abstract: High data rates give rise to frequency-selective propagation, whereas carrier frequency-offsets and mobility-induced Doppler shifts introduce time-selectivity in wireless links. To mitigate the resulting time- and frequency-selective (or doubly selective) channels, optimal training sequences have been designed only for special cases: pilot symbol assisted modulation (PSAM) for time-selective channels and pilot tone-assisted orthogonal frequency division multiplexing (OFDM) for frequency-selective channels. Relying on a basis expansion channel model, we design low-complexity optimal PSAM for block transmissions over doubly selective channels. The optimality in designing our PSAM parameters consists of maximizing a tight lower bound on the average channel capacity that is shown to be equivalent to the minimization of the minimum mean-square channel estimation error. Numerical results corroborate our theoretical designs.

Dual-mode shared OFDM methods/transmitters, receivers and systems

Abstract: A wireless terminal and network terminal are provided for implementing a new uplink OFDM protocol. In the new protocol, the wireless terminal has a first transmit chain for generating and transmitting a low rate mode OFDM transmission in a first frequency band of the OFDM band; and a second transmit chain for generating and transmitting a burst-mode transmission in a second frequency band of the OFDM band, the first frequency band being distinct from the second frequency band. An access channel is provided which is overlaid over the low rate mode transmissions of other users.

Bounding performance and suppressing intercarrier interference in wireless mobile OFDM

Abstract: While rapid variations of the fading channel cause intercarrier interference (ICI) in orthogonal frequency-division multiplexing (OFDM), thereby degrading its performance considerably, they also introduce temporal diversity, which can be exploited to improve performance. We first derive a matched-filter bound (MFB) for OFDM transmissions over doubly selective Rayleigh fading channels, which benchmarks the best possible performance if ICI is completely canceled without noise enhancement. We then derive universal performance bounds which show that the time-varying channel causes most of the symbol energy to be distributed over a few subcarriers, and that the ICI power on a subcarrier mainly comes from several neighboring subcarriers. Based on this fact, we develop low-complexity minimum mean-square error (MMSE) and decision-feedback equalizer (DFE) receivers for ICI suppression. Simulations show that the DFE receiver can collect significant gains of ICI-impaired OFDM with affordable complexity. In the relatively low Doppler frequency region, the bit-error rate of the DFE receiver is close to the MFB.

Linear constellation precoding for OFDM with maximum multipath diversity and coding gains

Abstract: Orthogonal frequency-division multiplexing (OFDM) converts a frequency-selective fading channel into parallel flat-fading subchannels, thereby simplifying channel equalization and symbol decoding. However, OFDM's performance suffers from the loss of multipath diversity, and the inability to guarantee symbol detectability when channel nulls occur. We introduce a linear constellation precoded OFDM for wireless transmissions over frequency-selective fading channels. Exploiting the correlation structure of subchannels and choosing system parameters properly, we first perform an optimal subcarrier grouping to divide the set of subchannels into subsets. Within each subset, a linear constellation-specific precoder is then designed to maximize both diversity and coding gains. While greatly reducing the decoding complexity and simplifying the precoder design, subcarrier grouping enables the maximum possible diversity and coding gains. In addition to reduced complexity, the proposed system guarantees symbol detectability regardless of channel nulls, and does not reduce the transmission rate. Analytic evaluation and corroborating simulations reveal its performance merits.

QoS aware adaptive resource allocation techniques for fair scheduling in OFDMA based broadband wireless access systems

Abstract: A system based on orthogonal frequency division multiple access (OFDMA) has been developed to deliver mobile broadband data service at data rates comparable to those of wired services, such as DSL and cable modems. We consider the resource allocation problem of assigning a set of subcarriers and determining the number of bits to be transmitted for each subcarrier in OFDMA systems. We compare simplicity, fairness and efficiency of our algorithm with the optimal and proposed suboptimal algorithms for varying values of delay spread, number of users and total power constraint. The results show that the performance of our approach is appealing and can be close to optimal. We also consider another resource allocation scheme in which there is no fixed QoS requirements per symbol but capacity is maximized.

A novel timing estimation method for OFDM systems

Abstract: We present a novel timing offset estimation method for orthogonal frequency division multiplexing systems. The estimator proposed here is designed to avoid the ambiguity which occurs in Schmidl's (1997) timing offset estimation method. The performance of the proposed scheme is presented in terms of mean and mean-square error (MSE) obtained by simulations. The simulation results show that the proposed estimator has a significantly smaller MSE than the other estimators.

Impact of the propagation environment on the performance of space-frequency coded MIMO-OFDM

Abstract: Previous work on space-frequency coded multiple-input multiple-output orthogonal frequency-division multiplexing (MIMO-OFDM) has been restricted to idealistic propagation conditions. In this paper, using a broadband MIMO channel model taking into account Ricean K-factor, transmit and receive angle spread, and antenna spacing, we study the impact of the propagation environment on the performance of space-frequency coded MIMO-OFDM. For a given space-frequency code, we quantify the achievable diversity order and coding gain as a function of the propagation parameters. We find that while the presence of spatial receive correlation affects all space-frequency codes equally, spatial fading correlation at the transmit array can result in widely varying performance losses. High-rate space-frequency codes such as spatial multiplexing are typically significantly more affected by transmit correlation than low-rate codes such as space-frequency block codes. We show that in the MIMO Ricean case the presence of frequency-selectivity typically results in improved performance compared to the frequency-flat case.

Optimal OFDM design for time-frequency dispersive channels

Abstract: Transmission over wireless channels is subject to time dispersion due to multipath propagation and to frequency dispersion due to the Doppler effect. Standard orthogonal frequency-division multiplexing (OFDM) systems, using a guard-time interval or cyclic prefix, combat intersymbol interference (ISI), but provide no protection against interchannel interference (ICI). This drawback has led to the introduction of pulse-shaping OFDM systems. We first present a general framework for pulse shape design. Our analysis shows that certain pulse shapes proposed in the literature are, in fact, optimal in a well-defined sense. Furthermore, our approach provides a simple way to adapt the pulse shape to varying channel conditions. We then show that (pulse-shaping) OFDM systems based on rectangular time-frequency lattices are not optimal for time- and frequency-dispersive wireless channels. This motivates the introduction of lattice-OFDM (LOFDM) systems which are based on general time-frequency lattices. Using results from sphere packing theory, we show how to design LOFDM systems (lattice and pulse shape) optimally for timeand frequency-dispersive channels in order to minimize the joint ISI/ICI. Our theoretical analysis is confirmed by numerical simulations, showing that LOFDM systems outperform traditional pulse-shaping OFDM systems with respect to robustness against ISI/ICI.

PAR reduction in OFDM via active constellation extension

Abstract: The high peak-to-average power ratio (PAR) in orthogonal frequency division multiplexing (OFDM) modulation systems can significantly limit performance. Methods exist which alter or introduce new signal constellations to combat large signal peaks. We present an improved PAR-reduction method that dynamically extends outer constellation points in active (data-carrying) channels, within margin-preserving constraints, in order to minimize the peak magnitude. This scheme simultaneously decreases the bit error rate slightly while substantially reducing the peak magnitude of an OFDM transmit block and requiring no side information. PAR reduction for an approximated analog signal is considered, and a 4.5 dB reduction is obtained for 256-channel QPSK OFDM. The results show great promise for use in commercial systems.

Time-frequency interleaved orthogonal frequency division multiplexing ultra wide band physical layer

Abstract: A PHY entity for a UWB system utilizes the unlicensed 3.1-10.6 GHZ UWB band, as regulated in the United States by the Code of Federal Regulation, Title 47, Section 15. The UWB system provides a wireless pico area network (PAN) with data payload communication capabilities of 55, 80, 110, 160, 200, 320 and 480 Mb/s. The UWB system employs orthogonal frequency division multiplexing (OFDM) and uses a total of 122 sub-carriers that are modulated using quadrature phase shift keying (QPSK). Forward error correction coding (convolutional coding) is used with a coding rate of {fraction (11/32)}, ½, ⅝ and ¾.

Optimal power allocation in multiuser OFDM systems

Abstract: Multiuser orthogonal frequency division multiplexing (MU-OFDM) is a promising technique for achieving high downlink capacities in future cellular systems. A key issue in MU-OFDM is the allocation of the OFDM subcarriers and power among users sharing the channel. Previous allocation algorithms cannot ensure fairness in advance. In this paper, a proportional rate adaptive resource allocation method for MU-OFDM is proposed. Subcarrier and power allocation are carried out sequentially to reduce the complexity, and an optimal power allocation procedure is derived, through which proportional fairness is achieved. Simulation results show that this low-complexity MU-OFDM system achieves double the capacity of a fixed time division approach to OFDM multiple access, and also has higher capacity than previously derived suboptimal power distribution schemes.

Iterative estimation and cancellation of clipping noise for OFDM signals

Abstract: Clipping is an efficient and simple method to reduce the peak-to-average power ratio (PAPR) of orthogonal frequency division multiplexing (OFDM) signals. However, clipping causes distortion and out-of-band radiation. In this letter, a novel iterative receiver is proposed to estimate and cancel the distortion caused by clipping noise. The proposed method is applied to clipped and filtered OFDM signals. It is shown by simulation that for an IEEE 802.11a typical scenario the system performance can be restored to within 1 dB of the nonclipped case with only moderate complexity increase and with no bandwidth expansion.

Transmit diversity processing for a multi-antenna communication system

Abstract: For transmit diversity in a multi-antenna OFDM system, a transmitter encodes, interleaves, and symbol maps traffic data to obtain data symbols. The transmitter processes each pair of data symbols to obtain two pairs of transmit symbols for transmission from a pair of antennas either (1) in two OFDM symbol periods for space-time transmit diversity or (2) on two subbands for space-frequency transmit diversity. N T ·(N T −1)/2 different antenna pairs are used for data transmission, with different antenna pairs being used for adjacent subbands, where N T is the number of antennas. The system may support multiple OFDM symbol sizes. The same coding, interleaving, and modulation schemes are used for different OFDM symbol sizes to simplify the transmitter and receiver processing. The transmitter performs OFDM modulation on the transmit symbol stream for each antenna in accordance with the selected OFDM symbol size. The receiver performs the complementary processing.

Orthogonal Frequency Division Multiplexing Based on Offset QAM

Abstract: One of the factors determining the performance of wireless Orthogonal Frequency Division Multiplexing (OFDM) systems is time-frequency localization of the transmitter and receiver pulse shaping filters. OFDM based on offset quadrature amplitude modulation (OFDM/OQAM) bypasses a major disadvantage of OFDM based on ordinary QAM, namely the fact that time-frequency well-localized pulse shaping filters are prohibited in the case of critical time-frequency density where spectral efficiency is maximal. In this chapter, we study the problem of pulse shaping filter design for OFDM/OQAM systems and we establish relations between OFDM/OQAM and Wilson and Gabor expansions. We derive general orthogonality conditions for OFDM/OQAM systems and we propose a computationally efficient method for designing time-frequency well-localized OFDM/OQAM pulse shaping filters with arbitrary length and arbitrary overlapping factors. We furthermore introduce biorthogonal frequency division multiplexing based on OQAM (BFDM/OQAM). Finally, design examples are presented to assess the performance of the proposed design algorithm.

Complex-field coding for OFDM over fading wireless channels

Abstract: Orthogonal frequency-division multiplexing (OFDM) converts a time-dispersive channel into parallel subchannels, and thus facilitates equalization and (de)coding. But when the channel has nulls close to or on the fast Fourier transform (FFT) grid, uncoded OFDM faces serious symbol recovery problems. As an alternative to various error-control coding techniques that have been proposed to ameliorate the problem, we perform complex-field coding (CFC) before the symbols are multiplexed. We quantify the maximum achievable diversity order for independent and identically distributed (i.i.d.) or correlated Rayleigh-fading channels, and also provide design rules for achieving the maximum diversity order. The maximum coding gain is given, and the encoder enabling the maximum coding gain is also found. Simulated performance comparisons of CFC-OFDM with existing block and convolutionally coded OFDM alternatives favor CFC-OFDM for the code rates used in a HiperLAN2 experiment.

Pilot-aided channel estimation for OFDM in wireless systems

Abstract: A method and apparatus for pilot-symbol aided channel estimation in a wireless digital communication system which transmits packets of N OFDM data blocks, each data block comprising a set of K orthogonal carrier frequencies. At the transmitter, pilot symbols are inserted into each data packet at known positions so as to occupy predetermined positions in the time-frequency space. At the receiver, the received signal is subject to a two-dimensional inverse Fourier transform, two-dimensional filtering and a two-dimensional Fourier transform to recover the pilot symbols so as to estimate the channel response.

Minimum BER block precoders for zero-forcing equalization

Abstract: We determine the linear precoder that minimizes the bit error rate (BER) at moderate-to-high signal-to-noise ratios (SNRs) for block transmission systems with zero-forcing (ZF) equalization and threshold detection The design is developed for the two standard schemes for eliminating inter-block interference, viz, zero padding (ZP) and cyclic prefix (CP) We show that both the ZP minimum BER precoder and the CP minimum BER precoder provide substantially lower error rates than standard block transmission schemes, such as orthogonal frequency division multiplexing (OFDM) The corresponding SNR gains can be on the order of several decibels We also show that the CP minimum BER precoder can be obtained by a two-stage modification of the water-filling discrete multitone modulation (DMT) scheme in which the diagonal water-filling power loading is replaced by a full matrix consisting of a diagonal minimum mean square error power loading matrix post multiplied by a discrete Fourier transform (DFT) matrix

HomePlug 1.0 powerline communication LANs—protocol description and performance results

Abstract: Products implementing the HomePlug 1.0 standard allowing high-speed communication on low-voltage powerlines have recently started arriving on the U.S. market for home and office networking without the requirement for installing new wires. Effective use of the powerline bandwidth requires robust physical (PHY) and medium access control (MAC) protocols to mitigate the harsh conditions of the powerline channel as well as the capability to support prioritized multimedia traffic. This paper describes powerline communications and the HomePlug 1.0 protocol, based on orthogonal frequency division multiplexing (OFDM) and carrier sense multiple access with collision avoidance (CSMA/CA), along with its changes to allow prioritized channel access. It then presents performance results for the HomePlug 1.0 protocol using a simulation model, ideal laboratory measurements with actual HomePlug 1.0 devices and field tests in a residential building. Simulation and laboratory data rates were around 6 Mbps, and field tests gave rates from 1.6 to 5.3 Mbps at the application level. Copyright © 2003 John Wiley & Sons, Ltd.

Pilot-aided channel estimation for OFDM/OQAM

Abstract: OFDM/offsetQAM is an interesting alternative to classical OFDM modulation, as it does not require the use of guard interval. This characteristic makes its spectral efficiency optimal. On the other hand, this modulation is less robust to Rayleigh fading channel. Indeed, when classical channel estimation used for OFDM modulation is applied straightforwardly to OFDM/OQAM modulation, an intrinsic inter-symbol-interference is observed. This deeply degrades its performances. In this paper, we theoretically explain this phenomenon and propose a reliable method to significantly reduce it. Results of different methods of pilot-aided channel estimation over delay-Doppler channels are shown in this paper.

Impulsive noise suppression in OFDM-based communication systems

Abstract: Orthogonal frequency division multiplexing (OFDM) is a technique used for terrestrial digital video broadcasting (DVB-T) and many other modern applications. The longer OFDM symbol duration provides an advantage in a presence of weak impulsive noise, because impulsive noise energy is spread among simultaneously transmitted OFDM sub-carriers. However, it has been recently recognized that this advantage turns into a disadvantage if the impulsive noise energy exceeds certain threshold. In this paper the algorithm for impulsive noise suppression in OFDM receivers is proposed and investigated. Whereas traditional methods for impulsive noise suppression are implemented in a time domain before OFDM demodulation, proposed algorithm compensates impulsive noise in a frequency domain after OFDM demodulation and channel equalization. The method is applied to DVB-T and its performance is studied by means of simulation.

On the peak-to-average power of OFDM signals based on oversampling

Abstract: Orthogonal frequency-division multiplexing (OFDM) introduces large amplitude variations in time, which can result in significant signal distortion in the presence of nonlinear amplifiers. We introduce a new bound for the peak of the continuous envelope of an OFDM signal, based on the maximum of its corresponding oversampled sequence; it is shown to be very tight as the oversampling rate increases. The bound is then used to derive a closed-form probability upper bound for the complementary cumulative distribution function of the peak-to-mean envelope power ratio of uncoded OFDM signals for sufficiently large numbers of subcarriers. As another application of the bound for oversampled sequences, we propose tight relative error bounds for computation of the peak power using two main methods: the oversampled inverse fast Fourier transform and the method introduced for coded systems based on minimum distance decoding of the code.