Topic
Perovskite solar cell
About: Perovskite solar cell is a research topic. Over the lifetime, 4701 publications have been published within this topic receiving 216807 citations. The topic is also known as: PSC.
Papers
More filters
TL;DR: In this article, a flexible perovskite solar cell exhibiting 12.2% power conversion efficiency (PCE) while using a low-temperature technology for the fabrication of a compact charge collection layer is presented.
Abstract: Perovskite solar cells are promising candidates for realizing an efficient, flexible, and lightweight energy supply system for wearable electronic devices. For flexible perovskite solar cells, achieving high power conversion efficiency (PCE) while using a low-temperature technology for the fabrication of a compact charge collection layer is a critical issue. Herein, we report on a flexible perovskite solar cell exhibiting 12.2% PCE as a result of the employment of an annealing-free, 20 nm thick, amorphous, compact TiOx layer deposited by atomic layer deposition. The excellent performance of the cell was attributed to fast electron transport, verified by time-resolved photoluminescence and impedance studies. The PCE remained the same down to 0.4 sun illumination, as well as to a 45° tilt to incident light. Mechanical bending of the devices worsened device performance by only 7% when a bending radius of 1 mm was used. The devices maintained 95% of the initial PCE after 1000 bending cycles for a bending radius of 10 mm. Degradation of the device performance by the bending was the result of crack formation from the transparent conducting oxide layer, demonstrating the potential of the low-temperature-processed TiOx layer to achieve more efficient and bendable perovskite solar cells, which becomes closer to a practical wearable power source.
575 citations
TL;DR: It is discussed that smaller vacancy concentrations (higher crystallinity) and replacement of MA(+) with larger cation molecules will be essential for suppressing hysteresis as well as preventing aging behavior of PSC photosensitizers.
Abstract: Hysteresis in current–voltage curves has been an important issue for conversion efficiency evaluation and development of perovskite solar cells (PSCs). In this study, we explored the ion diffusion effects in tetragonal CH3NH3PbI3 (MAPbI3) and trigonal (NH2)2CHPbI3 (FAPbI3) by first-principles calculations. The calculated activation energies of the anionic and cationic vacancy migrations clearly show that I– anions in both MAPbI3 and FAPbI3 can easily diffuse with low barriers of ca. 0.45 eV, comparable to that observed in ion-conducting materials. More interestingly, typical MA+ cations and larger FA+ cations both have rather low barriers as well, indicating that the cation molecules can migrate in the perovskite sensitizers when a bias voltage is applied. These results can explain the ion displacement scenario recently proposed by experiments. With the dilute diffusion theory, we discuss that smaller vacancy concentrations (higher crystallinity) and replacement of MA+ with larger cation molecules will be...
555 citations
TL;DR: This work has identified that excess organic component can reduce the colloidal size of and tune the morphology of the coordination framework in relation to final perovskite grains and partial chlorine substitution can accelerate the crystalline nucleation process of perovkite.
Abstract: The precursor of solution-processed perovskite thin films is one of the most central components for high-efficiency perovskite solar cells. We first present the crucial colloidal chemistry visualization of the perovskite precursor solution based on analytical spectra and reveal that perovskite precursor solutions for solar cells are generally colloidal dispersions in a mother solution, with a colloidal size up to the mesoscale, rather than real solutions. The colloid is made of a soft coordination complex in the form of a lead polyhalide framework between organic and inorganic components and can be structurally tuned by the coordination degree, thereby primarily determining the basic film coverage and morphology of deposited thin films. By utilizing coordination engineering, particularly through employing additional methylammonium halide over the stoichiometric ratio for tuning the coordination degree and mode in the initial colloidal solution, along with a thermal leaching for the selective release of ex...
552 citations
TL;DR: Because degradation of the as-formed perovskite film is in many ways analogous to its initial formation, the same suite of monitoring techniques reveals the moisture-induced transformation of low band gap methylammonium lead iodide to wide band gap hydrate compounds, raising the question of whether CH3NH3PbI3 and its analogues are thermodynamically stable phases.
Abstract: ConspectusA new front-runner has emerged in the field of next-generation photovoltaics. A unique class of materials, known as organic metal halide perovskites, bridges the gap between low-cost fabrication and exceptional device performance. These compounds can be processed at low temperature (typically in the range 80–150 °C) and readily self-assemble from the solution phase into high-quality semiconductor thin films. The low energetic barrier for crystal formation has mixed consequences. On one hand, it enables inexpensive processing and both optical and electronic tunability. The caveat, however, is that many as-formed lead halide perovskite thin films lack chemical and structural stability, undergoing rapid degradation in the presence of moisture or heat.To date, improvements in perovskite solar cell efficiency have resulted primarily from better control over thin film morphology, manipulation of the stoichiometry and chemistry of lead halide and alkylammonium halide precursors, and the choice of solve...
548 citations
TL;DR: The UCLA team has successfully passivated perovskite film by controlling the film growth with functional polymers as additive, which opens up a new class of chemical additives for improving perovSkite performance and should pave the way toward improving perOVskite solar cells for high efficiency and stability.
Abstract: The solution processing of polycrystalline perovskite films introduces trap states that can adversely affect their optoelectronic properties. Motivated by the use of small-molecule surfactants to improve the optoelectronic performance of perovskites, we demonstrate the use of polymers with coordinating groups to improve the performance of solution-processed semiconductor films. The use of these polymer modifiers results in a marked change in the electronic properties of the films, as measured by both carrier dynamics and overall device performance. The devices grown with the polymer poly(4-vinylpyridine) (PVP) show significantly enhanced power conversion efficiency from 16.9 ± 0.7% to 18.8 ± 0.8% (champion efficiency, 20.2%) from a reverse scan and stabilized champion efficiency from 17.5 to 19.1% [under a bias of 0.94 V and AM (air mass) 1.5-G, 1-sun illumination over 30 min] compared to controls without any passivation. Treating the perovskite film with PVP enables a VOC of up to 1.16 V, which is among the best reported for a CH3NH3PbI3 perovskite solar cell and one of the lowest voltage deficits reported for any perovskite to date. In addition, perovskite solar cells treated with PVP show a long shelf lifetime of up to 90 days (retaining 85% of the initial efficiency) and increased by a factor of more than 20 compared to those without any polymer (degrading to 85% after ~4 days). Our work opens up a new class of chemical additives for improving perovskite performance and should pave the way toward improving perovskite solar cells for high efficiency and stability.
539 citations