Topic
Perovskite solar cell
About: Perovskite solar cell is a research topic. Over the lifetime, 4701 publications have been published within this topic receiving 216807 citations. The topic is also known as: PSC.
Papers
More filters
Hong Kong Polytechnic University1, Wuhan University2, The Chinese University of Hong Kong3, South China University of Technology4, Hong Kong Baptist University5, South China Normal University6, City University of Hong Kong7, Chinese Academy of Sciences8, Jinan University9, University of California, Los Angeles10
TL;DR: In this article, a dimensionally graded perovskite formation approach was proposed to reduce the photovoltage loss through the simultaneous passivation of internal bulk defects and dimensional graded two-dimensional pervskite interface defects.
Abstract: Metal halide perovskite solar cells have demonstrated a high power conversion efficiency (PCE), and further enhancement of the PCE requires a reduction of the bandgap-voltage offset (WOC) and the non-radiative recombination photovoltage loss (ΔVOC,nr). Here, we report an effective approach for reducing the photovoltage loss through the simultaneous passivation of internal bulk defects and dimensionally graded two-dimensional perovskite interface defects. Through this dimensionally graded perovskite formation approach, an open-circuit voltage (VOC) of 1.24 V was obtained with a champion PCE of 21.54% in a 1.63 eV perovskite system (maximum VOC = 1.25 V, WOC = 0.38 V and ΔVOC,nr = 0.10 V); we further decreased the WOC to 0.326 V in a 1.53 eV perovskite system with a VOC of 1.21 V and a PCE of 23.78% (certified 23.09%). This approach is equally effective in achieving a low WOC (ΔVOC,nr) in 1.56 eV and 1.73 eV perovskite solar cell systems, and further leads to the substantially improved operational stability of perovskite solar cells. The use of a dimensionally graded 2D perovskite interface and passivation results in perovskite solar cells with very low photovoltage loss.
177 citations
TL;DR: The present work incorporates chemically modified graphene into nanocrystal SnO2 as the electron transporting layer (ETL) for highly efficient planar perovskite solar cells with power conversion efficiency of 20.2% and improved fill factor of 82%, which could be mainly attributed to the augmented charge extraction and transport.
Abstract: Organic–inorganic hybrid lead halide perovskites have been widely investigated in optoelectronics both experimentally and theoretically. The present work incorporates chemically modified graphene into nanocrystal SnO2 as the electron transporting layer (ETL) for highly efficient planar perovskite solar cells. The modification of SnO2 with highly conductive two-dimensional naphthalene diimide-graphene can increase surface hydrophobicity and form van der Waals interaction between the surfactant and the organic–inorganic hybrid lead halide perovskite compounds. As a result, highly efficient perovskite solar cells with power conversion efficiency of 20.2% can be achieved with an improved fill factor of 82%, which could be mainly attributed to the augmented charge extraction and transport.
177 citations
TL;DR: In this paper, a perovskite based solar cell using CH3NH3PbI3−xClx with different hole-transporting materials was constructed and it reached 9.3% of power conversion efficiency.
176 citations
TL;DR: In this paper, the properties of the solid hole transport layer (HTL) composite were systematically measured at several length scales, e.g., macroscopically (profilometry, 4-point probe conductivity, and thermogravimetry-differential thermal analysis), microscopically, and at the nanoscale to investigate film morphology, conductivity and dopant distribution.
Abstract: The use of a solid hole transport layer (HTL) was transformational for the recent perovskite solar cell (PSC) revolution in solar energy technology. Often high efficiency PSC devices employ heavily doped hole transport materials such as spiro-MeOTAD. Independent of HTL chemistry, lithium-bis-trifluoromethanesulfonyl-imide (LiTFSI) and tert-butylpyridine (TBP) are commonly used as additives in HTL formulations for PSCs. LiTFSI and TBP were originally optimized for dye-sensitized solar cells, where their roles have been extensively studied. However, in the case of PSCs, the function of TBP is not clearly understood. In this study, properties of the HTL composite deposited on flat silicon substrates were systematically measured at several length scales, e.g., macroscopically (profilometry, 4-point probe conductivity, and thermogravimetry-differential thermal analysis), microscopically, and at the nanoscale to investigate film morphology, conductivity, and dopant distribution. Microscopic distributions of spi...
175 citations
TL;DR: It is found that the crystal formation is kinetically driven by the annealing atmosphere, time and temperature, which indicates a critical impact of the atmosphere upon crystallization and the ultimate device performance.
Abstract: Recently, solution-processable organic–inorganic metal halide perovskites have come to the fore as a result of their high power-conversion efficiencies (PCE) in photovoltaics, exceeding 17%. To attain reproducibility in the performance, one of the critical factors is the processing conditions of the perovskite film, which directly influences the photophysical properties and hence the device performance. Here we study the effect of annealing parameters on the crystal structure of the perovskite films and correlate these changes with its photophysical properties. We find that the crystal formation is kinetically driven by the annealing atmosphere, time and temperature. Annealing in air produces an improved crystallinity and large grain domains as compared to nitrogen. Lower photoluminescence quantum efficiency (PLQE) and shorter photoluminescence (PL) lifetimes are observed for nitrogen annealed perovskite films as compared to the air-annealed counterparts. We note that the limiting nonradiative pathways (i...
174 citations