Topic
Perovskite (structure)
About: Perovskite (structure) is a research topic. Over the lifetime, 51482 publications have been published within this topic receiving 1541750 citations.
Papers published on a yearly basis
Papers
More filters
TL;DR: In this article, a nearly monodispersed CsPbBr3/TiO2 core/shell perovskite nanocrystals were synthesized through the encapsulation of colloidal colloidal C sPbBBr3 NCs with titanium precursor, followed by calcination at 300 °C.
Abstract: Inherent poor stability of perovskite nanocrystals (NCs) is the main impediment preventing broad applications of the materials. Here, TiO2 shell coated CsPbBr3 core/shell NCs are synthesized through the encapsulation of colloidal CsPbBr3 NCs with titanium precursor, followed by calcination at 300 °C. The nearly monodispersed CsPbBr3/TiO2 core/shell NCs show excellent water stability for at least three months with the size, structure, morphology, and optical properties remaining identical, which represent the most water-stable inorganic shell passivated perovskite NCs reported to date. In addition, TiO2 shell coating can effectively suppress anion exchange and photodegradation, therefore dramatically improving the chemical stability and photostability of the core CsPbBr3 NCs. More importantly, photoluminescence and (photo)electrochemical characterizations exhibit increased charge separation efficiency due to the electrical conductivity of the TiO2 shell, hence leading to an improved photoelectric activity in water. This study opens new possibilities for optoelectronic and photocatalytic applications of perovskites-based NCs in aqueous phase.
389 citations
TL;DR: The NiOx film, which was spin coated from presynthesized NiOx nanoparticles solution, can extract holes and block electrons efficiently, without any other post-treatments, in a flexible organic-inorganic hybrid perovskite solar cell.
Abstract: A solution-derived NiOx film was employed as the hole contact of a flexible organic–inorganic hybrid perovskite solar cell. The NiOx film, which was spin coated from presynthesized NiOx nanoparticles solution, can extract holes and block electrons efficiently, without any other post-treatments. An optimal power conversion efficiency (PCE) of 16.47% was demonstrated in the NiOx-based perovskite solar cell on an ITO-glass substrate, which is much higher than that of the perovskite solar cells using high temperature-derived NiOx film contacts. The low-temperature deposition process made the NiOx films suitable for flexible devices. NiOx-based flexible perovskite solar cells were fabricated on ITO-PEN substrates, and a preliminary PCE of 13.43% was achieved.
389 citations
TL;DR: In this paper, 1,3,7-trimethylxanthine, a commodity chemical with two conjugated carboxyl groups better known by its common name caffeine, improves the performance and thermal stability of perovskite solar cells.
389 citations
TL;DR: In this paper, a facile method to stabilize the α-phase CsPbII 3 films via a single-step film deposition process was proposed. But the method was limited to a single phase transition from black α phase to yellow δ phase at room temperature.
389 citations
TL;DR: It is demonstrated that polythiophene, deposited on the top of CsPbI2 Br, can significantly reduce electron-hole recombination within the perovskite, which is due to the electronic passivation of surface defect states, and the interfacial properties are improved by a simple annealing process.
Abstract: Cesium-based trihalide perovskites have been demonstrated as promising light absorbers for photovoltaic applications due to their superb composition stability. However, the large energy losses (Eloss ) observed in inorganic perovskite solar cells has become a major hindrance impairing the ultimate efficiency. Here, an effective and reproducible method of modifying the interface between a CsPbI2 Br absorber and polythiophene hole-acceptor to minimize the Eloss is reported. It is demonstrated that polythiophene, deposited on the top of CsPbI2 Br, can significantly reduce electron-hole recombination within the perovskite, which is due to the electronic passivation of surface defect states. In addition, the interfacial properties are improved by a simple annealing process, leading to significantly reduced energy disorder in polythiophene and enhanced hole-injection into the hole-acceptor. Consequently, one of the highest power conversion efficiency (PCE) of 12.02% from a reverse scan in inorganic mixed-halide perovskite solar cells is obtained. Modifying the perovskite films with annealing polythiophene enables an open-circuit voltage (VOC ) of up to 1.32 V and Eloss of down to 0.5 eV, which both are the optimal values reported among cesium-lead mixed-halide perovskite solar cells to date. This method provides a new route to further improve the efficiency of perovskite solar cells by minimizing the Eloss .
388 citations