Perovskite (structure)

About: Perovskite (structure) is a research topic. Over the lifetime, 51482 publications have been published within this topic receiving 1541750 citations.

Low-threshold amplified spontaneous emission and lasing from colloidal nanocrystals of caesium lead halide perovskites

Abstract: Metal halide semiconductors with perovskite crystal structures have recently emerged as highly promising optoelectronic materials. Despite the recent surge of reports on microcrystalline, thin-film and bulk single-crystalline metal halides, very little is known about the photophysics of metal halides in the form of uniform, size-tunable nanocrystals. Here we report low-threshold amplified spontaneous emission and lasing from ∼10 nm monodisperse colloidal nanocrystals of caesium lead halide perovskites CsPbX3 (X=Cl, Br or I, or mixed Cl/Br and Br/I systems). We find that room-temperature optical amplification can be obtained in the entire visible spectral range (440–700 nm) with low pump thresholds down to 5±1 μJ cm−2 and high values of modal net gain of at least 450±30 cm−1. Two kinds of lasing modes are successfully observed: whispering-gallery-mode lasing using silica microspheres as high-finesse resonators, conformally coated with CsPbX3 nanocrystals and random lasing in films of CsPbX3 nanocrystals. Lead halide perovskite colloidal nanocrystals have promising optoelectronic properties, such as high photoluminescence quantum yields and narrow emission linewidths. Here, the authors report low-threshold amplified spontaneous emission and two kinds of lasing in nanostructured caesium lead halide perovskites.

Inorganic caesium lead iodide perovskite solar cells

Abstract: The vast majority of perovskite solar cell research has focused on organic–inorganic lead trihalide perovskites. Herein, we present working inorganic CsPbI3 perovskite solar cells for the first time. CsPbI3 normally resides in a yellow non-perovskite phase at room temperature, but by careful processing control and development of a low-temperature phase transition route we have stabilised the material in the black perovskite phase at room temperature. As such, we have fabricated solar cell devices in a variety of architectures, with current–voltage curve measured efficiency up to 2.9% for a planar heterojunction architecture, and stabilised power conversion efficiency of 1.7%. The well-functioning planar junction devices demonstrate long-range electron and hole transport in this material. Importantly, this work identifies that the organic cation is not essential, but simply a convenience for forming lead triiodide perovskites with good photovoltaic properties. We additionally observe significant rate-dependent current–voltage hysteresis in CsPbI3 devices, despite the absence of the organic polar molecule previously thought to be a candidate for inducing hysteresis via ferroelectric polarisation. Due to its space group, CsPbI3 cannot be a ferroelectric material, and thus we can conclude that ferroelectricity is not required to explain current–voltage hysteresis in perovskite solar cells. Our report of working inorganic perovskite solar cells paves the way for further developments likely to lead to much more thermally stable perovskite solar cells and other optoelectronic devices.

Controllable self-induced passivation of hybrid lead iodide perovskites toward high performance solar cells.

Abstract: To improve the performance of the polycrystalline thin film devices, it requires a delicate control of its grain structures. As one of the most promising candidates among current thin film photovoltaic techniques, the organic/inorganic hybrid perovskites generally inherit polycrystalline nature and exhibit compositional/structural dependence in regard to their optoelectronic properties. Here, we demonstrate a controllable passivation technique for perovskite films, which enables their compositional change, and allows substantial enhancement in corresponding device performance. By releasing the organic species during annealing, PbI2 phase is presented in perovskite grain boundaries and at the relevant interfaces. The consequent passivation effects and underlying mechanisms are investigated with complementary characterizations, including scanning electron microscopy (SEM), X-ray diffraction (XRD), time-resolved photoluminescence decay (TRPL), scanning Kelvin probe microscopy (SKPM), and ultraviolet photoemi...

Organometal Perovskite Light Absorbers Toward a 20% Efficiency Low-Cost Solid-State Mesoscopic Solar Cell

Abstract: Recently, perovskite CH3NH3PbI3 sensitizer has attracted great attention due to its superb light-harvesting characteristics. Organometallic or organic materials were mostly used as sensitizers for solid-state dye-sensitized solar cells at early stages. Inorganic nanocrystals have lately received attention as light harvesters due to their high light-absorbing properties. Metal chalcogenides have been investigated with solid-state dye-sensitized solar cells; however, the best power conversion efficiency was reported to be around 6%. CH3NH3PbX3 (X = Cl, Br, or I) perovskite sensitizer made a breakthrough in solid-state mescoscopic solar cells, where the first record efficiency of around 10% was reported in 2012 using submicrometer-thick TiO2 film sensitized with CH3NH3PbI3. A rapid increase in efficiency approaching 14% followed shortly. In this Perspective, recent progress in perovskite-sensitized solid-state mesoscopic solar cells is reviewed. On the basis of the recent achievements, a power conversion eff...