Photocatalysis

About: Photocatalysis is a research topic. Over the lifetime, 67088 publications have been published within this topic receiving 2145233 citations. The topic is also known as: photocatalyst.

Amino-Assisted Anchoring of CsPbBr3 Perovskite Quantum Dots on Porous g-C3N4 for Enhanced Photocatalytic CO2 Reduction

Abstract: Halide perovskite quantum dots (QDs) have great potential in photocatalytic applications if their low charge transportation efficiency and chemical instability can be overcome To circumvent these obstacles, we anchored CsPbBr3 QDs (CPB) on NHx -rich porous g-C3 N4 nanosheets (PCN) to construct the composite photocatalysts via N-Br chemical bonding The 20 CPB-PCN (20 wt % of QDs) photocatalyst exhibits good stability and an outstanding yield of 149 μmol h-1 g-1 in acetonitrile/water for photocatalytic reduction of CO2 to CO under visible light irradiation, which is around 15 times higher than that of CsPbBr3 QDs This study opens up new possibilities of using halide perovskite QDs for photocatalytic application

Preparation of sphere-like g-C3N4/BiOI photocatalysts via a reactable ionic liquid for visible-light-driven photocatalytic degradation of pollutants

Abstract: Novel sphere-like g-C3N4/BiOI composite photocatalysts were prepared by a one-pot EG-assisted solvothermal process in the presence of reactable ionic liquid 1-butyl-3-methylimidazolium iodine ([Bmim]I). The nanostructured heterojunction was formed with g-C3N4 covering the surface of BiOI microspheres uniformly. Multiple techniques were applied to investigate the structure, morphology and photocatalytic properties of as-prepared samples. During the reactive process, the ionic liquid acted as solvent, reactant, template and dispersing agent at the same time, leading to g-C3N4 being uniformly dispersed on the sphere-like BiOI surface. Three different types of dyes rhodamine B (RhB), methylene blue (MB), methyl orange (MO) were chosen as model pollutants to evaluate the photocatalytic activity of g-C3N4/BiOI composite. The as-prepared g-C3N4/BiOI composite exhibited much higher photocatalytic activity than the pure BiOI. At the same time, colourless endocrine disrupting chemical bisphenol A (BPA) and phenols 4-chlorophenol (4-CP) were chosen to further evaluate the photocatalytic activity of g-C3N4/BiOI composite. The g-C3N4/BiOI composite also exhibited much higher photocatalytic activity than the pure BiOI, which showed a broad spectrum of photocatalytic degradation activities. The results indicated that the formed heterojunction of g-C3N4 covers the BiOI microspheres contributed to improved electron–hole separation and enhancement in photocatalytic activity. A photocatalytic mechanism of g-C3N4/BiOI composites is also proposed.

Hydrothermal doping method for preparation of Cr3+-TiO2 photocatalysts with concentration gradient distribution of Cr3+

Abstract: Cr3+-doped anatase titanium dioxide photocatalysts were prepared by the combination of sol–gel process with hydrothermal treatment. The samples were characterized by UV–vis diffuse reflectance spectroscopy, X-ray diffraction (XRD), Brunauer–Emmett–Teller (BET) specific surface area (SBET), transmission electron microscopy (TEM), atomic absorption flame emission spectroscopy (AAS), electron paramagnetic resonance (EPR) spectroscopy and X-ray photoelectron spectroscopy (XPS). It was confirmed that Cr substitutes Ti4+ in TiO2 lattice in trivalent ionic state, and the concentrations of dopants Cr3+ decrease from the exterior to the interior of doped TiO2. The photocatalytic activity of Cr-TiO2 was investigated for the photocatalytic degradation of XRG aqueous solution both under UV and visible light irradiation. Due to the excitation of 3d electron of Cr3+ to the conduction band of TiO2, Cr-TiO2 shows a good ability for absorbing the visible light to degrade XRG. Doping of chromium ions effectively improves the photocatalytic activity under both UV light irradiation and visible light irradiation with an optimal doping concentration of 0.15% and 0.2%, respectively. The special distribution of dopants Cr3+ seems having a good effect on enhancing the photocatalytic activity of Cr-TiO2.

Photodegradation of the aminoazobenzene acid orange 52 by three advanced oxidation processes: UV/H2O2, UV/TiO2 and VIS/TiO2: Comparative mechanistic and kinetic investigations

Abstract: This paper presents the results obtained from the oxidation of the aminoazobenzene dye AO52 by the UV/H2O2, UV/TiO2 and VIS/TiO2 systems. In the former case, we investigated the formation of first by-products by means of GC/MS, HPLC and 1H NMR. spectroscopy. We conclude that hydroxyl radicals are added to aromatic rings in the ipso position with respect to the sulfonate group or to the azo-linkage-bearing carbon. The reaction of the inorganic radical with the N,N-dimethylamino substituent, leading to demethylation, adds to the multiplicity of the possible pathways. Degradation by the UV/TiO2 system is pH dependent. Whereas hydroxyl radicals are the main oxidative agent in neutral and alkaline solutions, positive hole-induced oxidation competes with the reduction of the protonated dye molecules in acid media. Moreover, FTIR spectroscopy of AO52/TiO2 wafers provided an insight to the nature of the photoproducts. This process is very efficient since only ultimate breakdown products, i.e. aliphatic acids and inorganic salts, are detected. Similar results were obtained using visible light as the irradiation source in the case of wafers whereas in heterogeneous solutions, the dye seems to be resistant to degradation.

A visible-light response vanadium-doped titania nanocatalyst by sol–gel method

Abstract: A series of vanadium-doped TiO 2 catalysts were synthesized by two modified sol–gel methods. V-doped TiO 2 was found to be mainly preserved its anatase phase after calcination at 400 °C. The TEM micrographs showed the sizes of primary particles were in the range of 6–20 nm. The increase of vanadium doping promoted the particle growth, and enhanced “red-shift” in the UV-Vis absorption spectra. The XPS (X-ray photoelectron spectroscopy) could not detect vanadium indicating negligible vanadium on the surface of catalysts, furthermore, there were also no peak of vanadium oxide in the XRD patterns. XAS (X-ray absorption spectroscopy) analysis indicating V 4+ instead of V 5+ implied that vanadium either substituted Ti 4+ site or embedded in the vacancy of TiO 2 structure. Therefore, vanadium was concluded to be highly dispersed inside the TiO 2 structure. The photocatalytic activity was evaluated by the degradation of crystal violet (CV) and methylene blue (MB) under visible light irradiation. The degradation rate of CV and MB on V-doped TiO 2 were higher than those of pure TiO 2 . As the results, V-doped TiO 2 possessed better absorption ability of visible light.