Photolithography

About: Photolithography is a(n) research topic. Over the lifetime, 15482 publication(s) have been published within this topic receiving 221855 citation(s). The topic is also known as: optical lithography & UV lithography.

Soft Lithography in Biology and Biochemistry

Abstract: ▪ Abstract Soft lithography, a set of techniques for microfabrication, is based on printing and molding using elastomeric stamps with the patterns of interest in bas-relief. As a technique for fabricating microstructures for biological applications, soft lithography overcomes many of the shortcomings of photolithography. In particular, soft lithography offers the ability to control the molecular structure of surfaces and to pattern the complex molecules relevant to biology, to fabricate channel structures appropriate for microfluidics, and to pattern and manipulate cells. For the relatively large feature sizes used in biology (≥50 μm), production of prototype patterns and structures is convenient, inexpensive, and rapid. Self-assembled monolayers of alkanethiolates on gold are particularly easy to pattern by soft lithography, and they provide exquisite control over surface biochemistry.

Imprint Lithography with 25-Nanometer Resolution

Abstract: A high-throughput lithographic method with 25-nanometer resolution and smooth vertical sidewalls is proposed and demonstrated. The technique uses compression molding to create a thickness contrast pattern in a thin resist film carried on a substrate, followed by anisotropic etching to transfer the pattern through the entire resist thickness. Metal patterns with a feature size of 25 nanometers and a period of 70 nanometers were fabricated with the use of resist templates created by imprint lithography in combination with a lift-off process. With further development, imprint lithography should allow fabrication of sub-10-nanometer structures and may become a commercially viable technique for manufacturing integrated circuits and other nanodevices.

Fundamentals of microfabrication : the science of miniaturization

Abstract: LITHOGRAPHY Introduction Historical Note: Lithography's Origins Photolithography Overview Critical Dimension, Overall Resolution, Line-Width Lithographic Sensitivity and Intrinsic Resist Sensitivity (Photochemical Quantum Efficiency) Resist Profiles Contrast and Experimental Determination of Lithographic Sensitivity Resolution in Photolithography Photolithography Resolution Enhancement Technology Beyond Moore's Law Next Generation Lithographies Emerging Lithography Technologies PATTERN TRANSFER WITH DRY ETCHING TECHNIQUES Introduction Dry Etching: Definitions and Jargon Plasmas or Discharges Physical Etching: Ion Etching or Sputtering and Ion-Beam Milling Plasma Etching (Radical Etching) Physical/Chemical Etching PATTERN TRANSFER WITH ADDITIVE TECHNIQUES Introduction Silicon Growth Doping of Si Oxidation of Silicon Physical Vapor Deposition Chemical Vapor Deposition Silk-Screening or Screen-Printing Sol-Gel Deposition Technique Doctors' Blade or Tape Casting Plasma Spraying Deposition and Arraying Methods of Organic Layers in BIOMEMS Thin versus Thick Film Deposition Selection Criteria for Deposition Method WET BULK MICROMACHINING Introduction Historical Note Silicon Crystallography Silicon As Substrate Silicon As A Mechanical Element In MEMS Wet Isotropic And Anisotropic Etching Alignment Patterns Chemical Etching Models Etching With Bias And/Or Illumination Of The Semiconductor Etch-Stop Techniques Problems With Wet Bulk Micromachining SURFACE MICROMACHINING Introduction Historical Note Mechanical Properties of Thin Films Surface Micromachining Processes Poly-Si Surface Micromachining Modifications Non-Poly-Si Surface Micromachining Modifications Materials Case Studies LIGA AND MICROMOLDING Introduction LIGA-Background LIGA and LIGA-Like Process Steps A COMPARISON OF MINIATURIZATION TECHNIQUES: TOP-DOWN AND BOTTOM-UP MANUFACTURING Introduction Absolute and Relative Tolerance in Manufacturing Historical Note: Human Manufacturing Section I: Top-Down Manufacturing Methods Section II: Bottom-Up Approaches MODELING, BRAINS, PACKAGING, SAMPLE PREPARATION AND NEW MEMS MATERIALS Introduction Modeling Brains In Miniaturization Packaging Substrate Choice SCALING, ACTUATORS, AND POWER IN MINIATURIZED SYSTEMS Introduction Scaling Actuators Fluidics Scaling In Analytical Separation Equipment Other Actuators Integrated Power MINIATURIZATION APPLICATIONS Introduction Definitions and Classification Method Decision Three OVERALL MARKET For MICROMACHINES Introduction Why Use Miniaturization Technology ? From Perception to Realization Overall MEMS Market Size MEMS Market Character MEMS Based on Si Non-Silicon MEMS MEMS versus Traditional Precision Engineering The Times are a'Changing APPENDICES Metrology Techniques WWW Linkpage Etch Rate for Si, SiO2 Summary of Top-Down Miniaturization Tools Listing of names of 20 amino acids & their chemical formulas Genetic code Summary of Materials and Their Properties for Microfabrication References for Detailed Market Information on Miniature Devices MEMS Companies Update Suggested Further Reading Glossary Symbols used in Text INDEX Each chapter also contains sections of examples and problems

Unconventional Methods for Fabricating and Patterning Nanostructures.

Abstract: 4.1. Nanomachining with Scanning Probes 1831 4.2. Soft Lithography 1832 4.3. Embossing with Rigid Masters 1835 4.4. Near-Field Phase-Shifting Photolithography 1835 4.5. Topographically Directed Photolithography 1837 4.6. Topographically Directed Etching 1837 4.7. Lithography with Neutral Metastable Atoms 1838 4.8. Approaches to Size Reduction 1839 5. Techniques for Making Regular or Simple Patterns 1839

A gas chromatographic air analyzer fabricated on a silicon wafer

Abstract: A miniature gas analysis system has been built based on the principles of gas chromatography (GC). The major components are fabricated in silicon using photolithography and chemical etching techniques, which allows size reductions of nearly three orders of magnitude compared to conventional laboratory instruments. The chromatography system consists of a sample injection valve and a 1.5-m-long separating capillary column, which are fabricated on a substrate silicon wafer. The output thermal conductivity detector is separately batch fabricated and integrably mounted on the substrate wafer. The theory of gas chromatography has been used to optimize the performance of the sensor so that separations of gaseous hydrocarbon mixtures are performed in less than 10 s. The system is expected to find application in the areas of portable ambient air quality monitors, implanted biological experiments, and planetary probes.