Pinhole camera model

About: Pinhole camera model is a research topic. Over the lifetime, 2524 publications have been published within this topic receiving 70028 citations.

A flexible new technique for camera calibration

Abstract: We propose a flexible technique to easily calibrate a camera. It only requires the camera to observe a planar pattern shown at a few (at least two) different orientations. Either the camera or the planar pattern can be freely moved. The motion need not be known. Radial lens distortion is modeled. The proposed procedure consists of a closed-form solution, followed by a nonlinear refinement based on the maximum likelihood criterion. Both computer simulation and real data have been used to test the proposed technique and very good results have been obtained. Compared with classical techniques which use expensive equipment such as two or three orthogonal planes, the proposed technique is easy to use and flexible. It advances 3D computer vision one more step from laboratory environments to real world use.

A versatile camera calibration technique for high-accuracy 3D machine vision metrology using off-the-shelf TV cameras and lenses

Abstract: A new technique for three-dimensional (3D) camera calibration for machine vision metrology using off-the-shelf TV cameras and lenses is described. The two-stage technique is aimed at efficient computation of camera external position and orientation relative to object reference coordinate system as well as the effective focal length, radial lens distortion, and image scanning parameters. The two-stage technique has advantage in terms of accuracy, speed, and versatility over existing state of the art. A critical review of the state of the art is given in the beginning. A theoretical framework is established, supported by comprehensive proof in five appendixes, and may pave the way for future research on 3D robotics vision. Test results using real data are described. Both accuracy and speed are reported. The experimental results are analyzed and compared with theoretical prediction. Recent effort indicates that with slight modification, the two-stage calibration can be done in real time.

A four-step camera calibration procedure with implicit image correction

Abstract: In geometrical camera calibration the objective is to determine a set of camera parameters that describe the mapping between 3-D reference coordinates and 2-D image coordinates. Various methods for camera calibration can be found from the literature. However surprisingly little attention has been paid to the whole calibration procedure, i.e., control point extraction from images, model fitting, image correction, and errors originating in these stages. The main interest has been in model fitting, although the other stages are also important. In this paper we present a four-step calibration procedure that is an extension to the two-step method. There is an additional step to compensate for distortion caused by circular features, and a step for correcting the distorted image coordinates. The image correction is performed with an empirical inverse model that accurately compensates for radial and tangential distortions. Finally, a linear method for solving the parameters of the inverse model is presented.

Removing camera shake from a single photograph

Abstract: Camera shake during exposure leads to objectionable image blur and ruins many photographs. Conventional blind deconvolution methods typically assume frequency-domain constraints on images, or overly simplified parametric forms for the motion path during camera shake. Real camera motions can follow convoluted paths, and a spatial domain prior can better maintain visually salient image characteristics. We introduce a method to remove the effects of camera shake from seriously blurred images. The method assumes a uniform camera blur over the image and negligible in-plane camera rotation. In order to estimate the blur from the camera shake, the user must specify an image region without saturation effects. We show results for a variety of digital photographs taken from personal photo collections.

Visual Modeling with a Hand-Held Camera

Abstract: In this paper a complete system to build visual models from camera images is presented. The system can deal with uncalibrated image sequences acquired with a hand-held camera. Based on tracked or matched features the relations between multiple views are computed. From this both the structure of the scene and the motion of the camera are retrieved. The ambiguity on the reconstruction is restricted from projective to metric through self-calibration. A flexible multi-view stereo matching scheme is used to obtain a dense estimation of the surface geometry. From the computed data different types of visual models are constructed. Besides the traditional geometry- and image-based approaches, a combined approach with view-dependent geometry and texture is presented. As an application fusion of real and virtual scenes is also shown.