Polymer blend

About: Polymer blend is a research topic. Over the lifetime, 18474 publications have been published within this topic receiving 437183 citations. The topic is also known as: polymer mixture & Polymerblend 或者 Polyblend.

Blue light-emitting diodes with good spectral stability based on blends of poly(9,9-dioctylfluorene): Interplay between morphology, photophysics, and device performance

Abstract: Spectrally stable blue electroluminescence (EL) is obtained from single-layer polymer light-emitting diodes fabricated from binary blends of conjugated poly(9,9-dioctylfluorene) (PFO) with either thermally stable poly(vinyl diphenylquinoline) (PVQ) or polystyrene. The brightness and EL efficiency of the polymer blend LEDs were enhanced by a factor of 5−14 compared to the PFO homopolymer devices. The additional green emission observed in the EL spectra of pure PFO devices was substantially suppressed in the blend LEDs. The electrical characteristics of the diodes and electric-field-modulated PL spectroscopy results indicate increased spatial confinement induced exciton stability and electron−hole recombination efficiency in the blend devices. The variation of the device performance with blend composition is related to the phase-separated morphology of the blends. The origin of the spectral stability lies in the improved thermal stability of the PFO:PVQ blends due to the high glass transition temperature (T...

Morphology Optimization via Side Chain Engineering Enables All-Polymer Solar Cells with Excellent Fill Factor and Stability.

Abstract: All-polymer solar cells (all-PSCs) composed of conjugated polymers as both donor and acceptor components in bulk heterojunction photoactive layers have attracted increasing attention. However, it is a big challenge to achieve optimal morphology in polymer:polymer blends. In response, we report herein a new strategy to adjust the nanoscale organization for all-PSCs. Specifically, side chain engineering of the well-known naphthalene diimide (NDI)-based polymer N2200 is modulated by introducing a fraction of linear oligoethylene oxide (OE) side chains to replace branched alkyl chains on the NDI units and by synthesizing a series of NDI-based polymer acceptors NOEx, where x is the percentage of OE chain substituted NDI units relative to total NDI units. Compared to the reference polymer NOE0, OE-chain-containing polymer NOE10 offers a much higher power conversion efficiency (PCE) of 8.1% with a record high fill factor (FF) of 0.75 in all-PSCs. Moreover, the NOE10-based all-PSC exhibits excellent long-term and...

Reactive polymers for blend compatibilization

Abstract: Blending of immiscible polymers offers attractive opportunities for developing new materials with useful combinations of properties. However, simple blends often have poor mechanical properties and unstable morphologies. Compatibilization of such blends is necessary. Preformed graft or block copolymers have been traditionally added to act as compatibilizers. Another route, however, is to generate these copolymer compatibilizers in situ during melt blending using functionalized polymers. In this review, a variety of reactive polymers that have been utilized in the reactive compatibilization of polymer blends is examined. They are classified into six major categories according to the types of reactive groups they have, namely, maleic anhydride, carboxylic acids, carboxylic acid derivatives, primary and secondary amines, hydroxyl and epoxide, and reactive groups capable of ionic bonding. Their preparation methods and applications and the chemical reactions they undergo during melt blending are presented. © 1992 John Wiley & Sons, Inc.

Polymer blend solar cells based on a high-mobility naphthalenediimide-based polymer acceptor: Device physics, photophysics and morphology

Abstract: A high electron mobility polymer, poly{[N,N’-bis(2-octyldodecyl)-naphthalene-1,4,5,8-bis(dicarboximide)-2,6-diyl]-alt-5,5’-(2,2’-bithiophene) (P(NDI2OD-T2)) is investigated for use as an electron acceptor in all-polymer blends. Despite the high bulk electron mobility, near-infrared absorption band and compatible energy levels, bulk heterojunction devices fabricated with poly(3-hexylthiophene) (P3HT) as the electron donor exhibit power conversion efficiencies of only 0.2%. In order to understand this disappointing photovoltaic performance, systematic investigations of the photophysics, device physics and morphology of this system are performed. Ultra-fast transient absorption spectroscopy reveals a two-stage decay process with an initial rapid loss of photoinduced polarons, followed by a second slower decay. This second slower decay is similar to what is observed for efficient P3HT:PCBM ([6,6]-phenyl C61-butyric acid methyl ester) blends, however the initial fast decay that is absent in P3HT:PCBM blends suggests rapid, geminate recombination of charge pairs shortly after charge transfer. X-ray microscopy reveals coarse phase separation of P3HT:P(NDI2OD-T2) blends with domains of size 0.2 to 1 micrometer. P3HT photoluminescence, however, is still found to be efficiently quenched indicating intermixing within these mesoscale domains. This hierarchy of phase separation is consistent with the transient absorption, whereby localized confinement of charges on isolated chains in the matrix of the other polymer hinders the separation of interfacial electron-hole pairs. These results indicate that local, interfacial processes are the key factor determining the overall efficiency of this system and highlight the need for improved morphological control in order for the potential benefit of high-mobility electron accepting polymers to be realized.