Topic
Pulse duration
About: Pulse duration is a research topic. Over the lifetime, 19429 publications have been published within this topic receiving 286507 citations.
Papers published on a yearly basis
Papers
More filters
••
TL;DR: In this paper, a series of laser joining experiments between polyethylene terephthalate (PET) and aluminium alloy (A5052) were conducted to investigate the effect of anodizing on A5052 surface on dissimilar materials used in joining.
85 citations
•
03 Dec 2004
TL;DR: In this paper, a laser-based method of removing a target link structure of a circuit fabricated on a substrate includes generating a pulsed laser output at a pre-determined wavelength less than an absorption edge of the substrate.
Abstract: A laser-based method of removing a target link structure of a circuit fabricated on a substrate includes generating a pulsed laser output at a pre-determined wavelength less than an absorption edge of the substrate. The laser output includes at least one pulse having a pulse duration in the range of about 10 picoseconds to less than 1 nanosecond, the pulse duration being within a thermal laser processing range. The method also includes delivering and focusing the laser output onto the target link structure. The focused laser output has sufficient power density at a location within the target structure to reduce the reflectivity of the target structure and efficiently couple the focused laser output into the target structure to remove the link without damaging the substrate.
85 citations
••
TL;DR: In this paper, the effect of pulse duration upon the line profile of Cu I emission observed by laser ablation of a copper metal plate immersed in water has been examined, and the results show that the use of a long-duration pulse enables in situ elemental analysis of the solid surface in contact with a bulk liquid.
Abstract: The effect of pulse duration upon the line profile of Cu I emission observed by laser ablation of a copper metal plate immersed in water has been examined. By irradiating a pulse with the duration longer than 40 ns the spectral profile with clear narrow emission lines of Cu atoms is obtained, while the emission spectra always suffer from broadening and self-absorption by the irradiation of the 20 ns pulse for the ablation. The results show that the use of a long-duration pulse enables in situ elemental analysis of the solid surface in contact with a bulk liquid.
85 citations
••
TL;DR: In this article, a Q-switched Nd:YAG laser at 1064 nm with a pulse duration of about 5 ns was used for ignition of different hydrogen-air mixtures, using different filling pressures (p=0.5-4.2 MPa ), different ignition energies (pulse energy PE=1-50 mJ ), different chamber temperatures (T=393-473 K ) and different focal length lenses (f=60, 120 mm ).
85 citations
••
TL;DR: The study reveals that the coherent portion inside the pulse length of these two interactions caused by the same phase is responsible for this behavior, and allows us to detect 1.5-cm outer-layer cracks on an optical ground-wire cable.
Abstract: We provide a theoretical explanation for a coherent probe-pump-based Brillouin sensor system that achieves centimeter spatial resolution with high-frequency resolution. It was recently discovered that, when a combination of cw and pulsed light (the probe beam) interacts with a cw laser (the pump beam), centimeter spatial resolution with high-frequency resolution can be achieved even though the probe-pulse duration is 1.5 ns [Opt. Lett.29, 1485 (2004)]. Our study reveals that the coherent portion inside the pulse length of these two interactions caused by the same phase is responsible for this behavior. It allows us to detect 1.5-cm outer-layer cracks on an optical ground-wire cable.
85 citations