Topic
Pulse-position modulation
About: Pulse-position modulation is a research topic. Over the lifetime, 3916 publications have been published within this topic receiving 72057 citations. The topic is also known as: PPM.
Papers published on a yearly basis
Papers
More filters
IBM1
TL;DR: An introduction into TCM is given, reasons for the development of TCM are reviewed, and examples of simple TCM schemes are discussed.
Abstract: rellis-Coded Modulation (TCM) has evolved over the past decade as a combined coding and modulation technique for digital transmission over band-limited channels. Its main attraction comes from the fact that it allows the achievement of significant coding gains over conventional uncoded multilevel modulation without compromising bandwidth efficiency. T h e first TCM schemes were proposed in 1976 [I]. Following a more detailed publication [2] in 1982, an explosion of research and actual implementations of TCM took place, to the point where today there is a good understanding of the theory and capabilities of TCM methods. In Part 1 of this two-part article, an introduction into TCM is given. T h e reasons for the development of TCM are reviewed, and examples of simple TCM schemes are discussed. Part I1 [I51 provides further insight into code design and performance, and addresses. recent advances in TCM. TCM schemes employ redundant nonbinary modulation in combination with a finite-state encoder which governs the selection of modulation signals to generate coded signal sequences. In the receiver, the noisy signals are decoded by a soft-decision maximum-likelihood sequence decoder. Simple four-state TCM schemes can improve. the robustness of digital transmission against additive noise by 3 dB, compared to conventional , uncoded modulation. With more complex TCM schemes, the coding gain can reach 6 dB or more. These gains are obtained without bandwidth expansion or reduction of the effective information rate as required by traditional error-correction schemes. Shannon's information theory predicted the existence of coded modulation schemes with these characteristics more than three decades ago. T h e development of effective TCM techniques and today's signal-processing technology now allow these ,gains to be obtained in practice. Signal waveforms representing information sequences ~ are most impervious to noise-induced detection errors if they are very different from each other. Mathematically, this translates into therequirement that signal sequences should have large distance in Euclidean signal space. ~ T h e essential new concept of TCM that led to the afore-1 mentioned gains was to use signal-set expansion to I provide redundancy for coding, and to design coding and ' signal-mapping functions jointly so as to maximize ~ directly the \" free distance \" (minimum Euclidean distance) between coded signal sequences. This allowed the construction of modulation codes whose free distance significantly exceeded the minimum distance between uncoded modulation signals, at the same information rate, bandwidth, and signal power. The term \" …
874 citations
TL;DR: In this article, a digital modulation for future mobile radio telephone services is proposed, and its fundamental properties are clarified with the aid of machine computation, and the constitution of modulator and demodulator is discussed from the viewpoints of mobile radio applications.
Abstract: This paper is concerned with digital modulation for future mobile radio telephone services. First, the specific requirements on the digital modulation for mobile radio use are described. Then, premodulation Gaussian filtered minimum shift keying (GMSK) with coherent detection is proposed as an effective digital modulation for the present purpose, and its fundamental properties are clarified with the aid of machine computation. The constitution of modulator and demodulator is then discussed from the viewpoints of mobile radio applications. The superiority of this modulation is supported by some experimental test results.
720 citations
TL;DR: Three forms of IM are investigated: spatial modulation, channel modulation and orthogonal frequency division multiplexing (OFDM) with IM, which consider the transmit antennas of a multiple-input multiple-output system, the radio frequency mirrors mounted at a transmit antenna and the subcarriers of an OFDM system for IM techniques, respectively.
Abstract: What is index modulation (IM)? This is an interesting question that we have started to hear more and more frequently over the past few years. The aim of this paper is to answer this question in a comprehensive manner by covering not only the basic principles and emerging variants of IM, but also reviewing the most recent as well as promising advances in this field toward the application scenarios foreseen in next-generation wireless networks. More specifically, we investigate three forms of IM: spatial modulation, channel modulation and orthogonal frequency division multiplexing (OFDM) with IM, which consider the transmit antennas of a multiple-input multiple-output system, the radio frequency mirrors (parasitic elements) mounted at a transmit antenna and the subcarriers of an OFDM system for IM techniques, respectively. We present the up-to-date advances in these three promising frontiers and discuss possible future research directions for IM-based schemes toward low-complexity, spectrum- and energy-efficient next-generation wireless networks.
676 citations
TL;DR: The performance of a single-user ultra-wideband communication system employing binary block-coded pulse-position modulation and suboptimal receivers in multipath channels is considered and numerical results for several cases are obtained which illustrate the tradeoff between performance and receiver complexity.
Abstract: The performance of a single-user ultra-wideband (UWB) communication system employing binary block-coded pulse-position modulation (PPM) and suboptimal receivers in multipath channels is considered. The receivers examined include a RAKE receiver with various diversity combining schemes and an autocorrelation receiver, which is used in conjunction with transmitted reference (TR) signaling. A general framework is provided for deriving the performance of these receivers in multipath channels corrupted by additive white Gaussian noise (AWGN). By employing previous measurements of indoor UWB channels, we obtain numerical results for several cases which illustrate the tradeoff between performance and receiver complexity.
638 citations
23 May 1993
TL;DR: A system is proposed and analyzed, which uses several transmit antennas to achieve diversity in a flat fading mobile radio environment, and simulation results confirm the expected gain.
Abstract: A system is proposed and analyzed, which uses several transmit antennas to achieve diversity in a flat fading mobile radio environment. The signals at different antennas carry the same digital information, but have different modulation parameters (modulation diversity). In contrast to other proposals, no bandwidth expansion is required. Modulation diversity for quadrature amplitude modulation (QAM) type modulation is achieved by using different partial response type base pulses. Simulation results confirm the expected gain. >
489 citations