Showing papers on "Raman spectroscopy published in 2012"

From bulk to monolayer MoS2: evolution of Raman scattering

Abstract: Molybdenum disulfi de (MoS 2 ) is systematically studied using Raman spectroscopy with ultraviolet and visible laser lines. It is shown that only the Raman frequencies of E 1 and A1g peaks vary monotonously with the layer number of ultrathin MoS 2 fl akes, while intensities or widths of the peaks vary arbitrarily. The coupling between electronic transitions and phonons are found to become weaker when the layer number of MoS 2 decreases, attributed to the increased electronic transition energies or elongated intralayer atomic bonds in ultrathin MoS 2 . The asymmetric Raman peak at 454 cm − 1 , which has been regarded as the overtone of longitudinal optical M phonons in bulk MoS 2 , is actually a combinational band involving a longitudinal acoustic mode (LA(M)) and an optical mode ( A2u ). Our fi ndings suggest a clear evolution of the coupling between electronic transition and phonon when MoS 2 is scaled down from three- to two-dimensional geometry.

Probing the Nature of Defects in Graphene by Raman Spectroscopy

Abstract: Raman spectroscopy is able to probe disorder in graphene through defect-activated peaks. It is of great interest to link these features to the nature of disorder. Here we present a detailed analysis of the Raman spectra of graphene containing different type of defects. We found that the intensity ratio of the D and D′ peak is maximum (∼13) for sp3-defects, it decreases for vacancy-like defects (∼7), and it reaches a minimum for boundaries in graphite (∼3.5). This makes Raman Spectroscopy a powerful tool to fully characterize graphene.

3D Graphene–Cobalt Oxide Electrode for High-Performance Supercapacitor and Enzymeless Glucose Detection

Abstract: Using a simple hydrothermal procedure, cobalt oxide (Co3O4) nanowires were in situ synthesized on three-dimensional (3D) graphene foam grown by chemical vapor deposition. The structure and morphology of the resulting 3D graphene/Co3O4 composites were characterized by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, and Raman spectroscopy. The 3D graphene/Co3O4 composite was used as the monolithic free-standing electrode for supercapacitor application and for enzymeless electrochemical detection of glucose. We demonstrate that it is capable of delivering high specific capacitance of ∼1100 F g–1 at a current density of 10 A g–1 with excellent cycling stability, and it can detect glucose with a ultrahigh sensitivity of 3.39 mA mM–1 cm–2 and a remarkable lower detection limit of <25 nM (S/N = 8.5).

Symmetry-dependent phonon renormalization in monolayer MoS 2 transistor

Abstract: A strong electron-phonon interaction which limits the electronic mobility of semiconductors can also have significant effects on phonon frequencies. The latter is the key to the use of Raman spectroscopy for nondestructive characterization of doping in graphene-based devices. Using in situ Raman scattering from a single-layer MoS2 electrochemically top-gated field-effect transistor (FET), we show softening and broadening of the A(1g) phonon with electron doping, whereas the other Raman-active E-2g(1) mode remains essentially inert. Confirming these results with first-principles density functional theory based calculations, we use group theoretical arguments to explain why the A(1g) mode specifically exhibits a strong sensitivity to electron doping. Our work opens up the use of Raman spectroscopy in probing the level of doping in single-layer MoS2-based FETs, which have a high on-off ratio and are of technological significance.

Optical separation of mechanical strain from charge doping in graphene

Abstract: Because of its superior stretchability, graphene exhibits rich structural deformation behaviours and its strain engineering has proven useful in modifying its electronic and magnetic properties. Despite the strain-sensitivity of the Raman G and 2D modes, the optical characterization of the native strain in graphene on silica substrates has been hampered by excess charges interfering with both modes. Here we show that the effects of strain and charges can be optically separated from each other by correlation analysis of the two modes, enabling simple quantification of both. Graphene with in-plane strain randomly occurring between −0.2% and 0.4% undergoes modest compression (−0.3%) and significant hole doping on thermal treatments. This study suggests that substrate-mediated mechanical strain is a ubiquitous phenomenon in two-dimensional materials. The proposed analysis will be of great use in characterizing graphene-based materials and devices. The spectral position of Raman peaks is a useful diagnostic for determining the degree of strain and excess electronic charges present in graphene. This study demonstrates that these two contributions can be separated from each other and therefore be obtained at the same time.

Graphene Annealing: How Clean Can It Be?

Abstract: Surface contamination by polymer residues has long been a critical problem in probing graphene’s intrinsic properties and in using graphene for unique applications in surface chemistry, biotechnology, and ultrahigh speed electronics. Poly(methyl methacrylate) (PMMA) is a macromolecule commonly used for graphene transfer and device processing, leaving a thin layer of residue to be empirically cleaned by annealing. Here we report on a systematic study of PMMA decomposition on graphene and of its impact on graphene’s intrinsic properties using transmission electron microscopy (TEM) in combination with Raman spectroscopy. TEM images revealed that the physisorbed PMMA proceeds in two steps of weight loss in annealing and cannot be removed entirely at a graphene susceptible temperature before breaking. Raman analysis shows a remarkable blue-shift of the 2D mode after annealing, implying an anneal-induced band structure modulation in graphene with defects. Calculations using density functional theory show that l...

A Raman spectroscopic investigation of graphite oxide derived graphene

Abstract: Graphene sheets that are now routinely obtained by the exfoliation/reduction of graphite oxide exhibit Raman spectra unlike traditional graphene systems. The general attributes of the Raman spectra of these ‘wrinkled graphene’ are first reaffirmed by evaluating the spectra of samples prepared by seven different exfoliation-reduction methods. These graphene sheets exhibit highly broadened D and G Raman bands and in addition, have a modulated bump in place of the conventional 2D (G′) band. It is shown that the high wavenumber ‘bump’ can be resolved into the conventional 2D band and several defect activated peaks such as G*, D+D′ and 2D′. The broad G band could also be deconvoluted into the actual G band and the D′ band, thereby attributing the broadening in the G band to the presence of this defect activated band. Two additional modes, named as D* at 1190 cm-1 and D** at ∼1500 cm-1 could be identified. These peculiar features in the Raman spectrum of ‘graphene’ are attributed to the highly disordered and wrinkled (defective) morphology of the sheets. The affect of defects are further augmented due to the finite crystallite size of these graphene sheets. The dispersion in the band positions and peak intensities with respect to the laser energy are also demonstrated.

Single-molecule surface-enhanced Raman spectroscopy.

Abstract: A general overview of the field of single-molecule (SM) surface-enhanced Raman spectroscopy (SERS) as it stands today is provided. After years of debates on the basic aspects of SM-SERS, the technique is emerging as a well-established subfield of spectroscopy and SERS. SM-SERS is allowing the observation of subtle spectroscopic phenomena that were not hitherto accessible. Examples of the latter are natural isotopic substitutions in single molecules, observation of the true homogeneous broadening of Raman peaks, Raman excitation profiles of individual molecules, and SM electrochemistry. With background examples of the contributions produced by our group, properly interleaved with results by other practitioners in the field, we present some of the latest developments and promising new leads in this new field of spectroscopy.

Raman spectroscopy: a new approach to measure the percentage of anatase tio2 exposed (001) facets

Abstract: Controlling the growth of high-activity anatase TiO2 exposed {001} facets improves greatly the adsorption and electronic and photocatalytic properties and has been attractive for various environmental and energy-related applications. In this paper, we introduced a novel approach for quantitatively measuring the percentage of exposed {001} facets in anatase TiO2 by using Raman spectroscopy. Comparing to XRD, Raman peaks originate from the vibration of molecular bonds, that is, vibrational mode Eg and A1g peaks, which are related to different crystal planes. Therefore, it provided a high sensitivity and accuracy for measuring the percentage of the exposed facets from the micro perspective of molecular bonding with less measurement errors. With the photocatalytic experiments, we found that 50% was the optimal percentage of the exposed {001} facets for the highest efficiency, which seemed more reasonable than the value of 70% obtained from XRD.

The shear mode of multilayer graphene

Abstract: The quest for materials capable of realizing the next generation of electronic and photonic devices continues to fuel research on the electronic, optical and vibrational properties of graphene. Few-layer graphene (FLG) flakes with less than ten layers each show a distinctive band structure. Thus, there is an increasing interest in the physics and applications of FLGs. Raman spectroscopy is one of the most useful and versatile tools to probe graphene samples. Here, we uncover the interlayer shear mode of FLGs, ranging from bilayer graphene (BLG) to bulk graphite, and suggest that the corresponding Raman peak measures the interlayer coupling. This peak scales from 43 cm 1 in bulk graphite to 31 cm 1 in BLG. Its low energy makes it sensitive to near-Dirac point quasiparticles. Similar shear modes are expected in all layered materials, providing a direct probe of interlayer interactions.

Nitrogen-doped graphene: beyond single substitution and enhanced molecular sensing

Abstract: Graphene is a two-dimensional network in which sp2-hybridized carbon atoms are arranged in two different triangular sub-lattices (A and B). By incorporating nitrogen atoms into graphene, its physico-chemical properties could be significantly altered depending on the doping configuration within the sub-lattices. Here, we describe the synthesis of large-area, highly-crystalline monolayer N-doped graphene (NG) sheets via atmospheric-pressure chemical vapor deposition, yielding a unique N-doping site composed of two quasi-adjacent substitutional nitrogen atoms within the same graphene sub-lattice (N2AA). Scanning tunneling microscopy and spectroscopy (STM and STS) of NG revealed the presence of localized states in the conduction band induced by N2AA-doping, which was confirmed by ab initio calculations. Furthermore, we demonstrated for the first time that NG could be used to efficiently probe organic molecules via a highly improved graphene enhanced Raman scattering.

In Situ Raman Study of Nickel Oxide and Gold-Supported Nickel Oxide Catalysts for the Electrochemical Evolution of Oxygen

Abstract: An in situ Raman spectroscopic investigation has been carried out to identify the composition of the active phase present on the surface of nickel electrodes used for the electrochemical evolution of oxygen. The electrolyte in all cases was 0.1 M KOH. A freshly polished Ni electrode oxidized upon immersion in the electrolyte and at potentials approaching the evolution of oxygen developed a layer of γ-NiOOH. Electrochemical cycling of this film transformed it into β-NiOOH, which was observed to be three times more active than γ-NiOOH. The higher activity of β-NiOOH is attributed to an unidentified Ni oxide formed at a potential above 0.52 V (vs Hg/HgO reference). We have also observed that a submonolayer of Ni oxide deposited on Au exhibits a turnover frequency (TOF) for oxygen evolution that is an order of magnitude higher than that for a freshly prepared γ-NiOOH surface and more than 2-fold higher than that for a β-NiOOH surface. By contrast, a similar film deposited on Pd exhibits a TOF that is similar ...

Catalytic processes monitored at the nanoscale with tip-enhanced Raman spectroscopy

Abstract: Heterogeneous catalysts play a pivotal role in the chemical industry, but acquiring molecular insights into functioning catalysts remains a significant challenge. Recent advances in micro-spectroscopic approaches have allowed spatiotemporal information to be obtained on the dynamics of single active sites and the diffusion of single molecules. However, these methods lack nanometre-scale spatial resolution and/or require the use of fluorescent labels. Here, we show that time-resolved tip-enhanced Raman spectroscopy can monitor photocatalytic reactions at the nanoscale. We use a silver-coated atomic force microscope tip to both enhance the Raman signal and to act as the catalyst. The tip is placed in contact with a self-assembled monolayer of p-nitrothiophenol molecules adsorbed on gold nanoplates. A photocatalytic reduction process is induced at the apex of the tip with green laser light, while red laser light is used to monitor the transformation process during the reaction. This dual-wavelength approach can also be used to observe other molecular effects such as monolayer diffusion.

Raman spectroscopy study of rotated double-layer graphene: misorientation-angle dependence of electronic structure.

Abstract: We present a systematic Raman study of unconventionally stacked double-layer graphene, and find that the spectrum strongly depends on the relative rotation angle between layers. Rotation-dependent trends in the position, width and intensity of graphene 2D and G peaks are experimentally established and accounted for theoretically. Our theoretical analysis reveals that changes in electronic band structure due to the interlayer interaction, such as rotational-angle dependent Van Hove singularities, are responsible for the observed spectral features. Our combined experimental and theoretical study provides a deeper understanding of the electronic band structure of rotated double-layer graphene, and leads to a practical way to identify and analyze rotation angles of misoriented double-layer graphene.

Surface enhanced Raman spectroscopy on a flat graphene surface

Abstract: Surface enhanced Raman spectroscopy (SERS) is an attractive analytical technique, which enables single-molecule sensitive detection and provides its special chemical fingerprints. During the past decades, researchers have made great efforts towards an ideal SERS substrate, mainly including pioneering works on the preparation of uniform metal nanostructure arrays by various nanoassembly and nanotailoring methods, which give better uniformity and reproducibility. Recently, nanoparticles coated with an inert shell were used to make the enhanced Raman signals cleaner. By depositing SERS-active metal nanoislands on an atomically flat graphene layer, here we designed a new kind of SERS substrate referred to as a graphene-mediated SERS (G-SERS) substrate. In the graphene/metal combined structure, the electromagnetic “hot” spots (which is the origin of a huge SERS enhancement) created by the gapped metal nanoislands through the localized surface plasmon resonance effect are supposed to pass through the monolayer graphene, resulting in an atomically flat hot surface for Raman enhancement. Signals from a G-SERS substrate were also demonstrated to have interesting advantages over normal SERS, in terms of cleaner vibrational information free from various metal-molecule interactions and being more stable against photo-induced damage, but with a comparable enhancement factor. Furthermore, we demonstrate the use of a freestanding, transparent and flexible “G-SERS tape” (consisting of a polymer-layer-supported monolayer graphene with sandwiched metal nanoislands) to enable direct, real time and reliable detection of trace amounts of analytes in various systems, which imparts high efficiency and universality of analyses with G-SERS substrates.

Two-dimensional phonon transport in graphene

Abstract: Properties of phonons-quanta of the crystal lattice vibrations-in graphene have recently attracted significant attention from the physics and engineering communities. Acoustic phonons are the main heat carriers in graphene near room temperature, while optical phonons are used for counting the number of atomic planes in Raman experiments with few-layer graphene. It was shown both theoretically and experimentally that transport properties of phonons, i.e. energy dispersion and scattering rates, are substantially different in a quasi-two-dimensional system such as graphene compared to the basal planes in graphite or three-dimensional bulk crystals. The unique nature of two-dimensional phonon transport translates into unusual heat conduction in graphene and related materials. In this review, we outline different theoretical approaches developed for phonon transport in graphene, discuss contributions of the in-plane and cross-plane phonon modes, and provide comparison with available experimental thermal conductivity data. Particular attention is given to analysis of recent results for the phonon thermal conductivity of single-layer graphene and few-layer graphene, and the effects of the strain, defects, and isotopes on phonon transport in these systems.

Nanostructured SnO2–ZnO Heterojunction Photocatalysts Showing Enhanced Photocatalytic Activity for the Degradation of Organic Dyes

Abstract: Nanoporous SnO2–ZnO heterojunction nanocatalyst was prepared by a straightforward two-step procedure involving, first, the synthesis of nanosized SnO2 particles by homogeneous precipitation combined with a hydrothermal treatment and, second, the reaction of the as-prepared SnO2 particles with zinc acetate followed by calcination at 500 °C. The resulting nanocatalysts were characterized by X-ray diffraction (XRD), FTIR, Raman, X-ray photoelectron spectroscopy (XPS), nitrogen adsorption–desorption analyses, transmission electron microscopy (TEM), and UV–vis diffuse reflectance spectroscopy. The SnO2–ZnO photocatalyst was made of a mesoporous network of aggregated wurtzite ZnO and cassiterite SnO2 nanocrystallites, the size of which was estimated to be 27 and 4.5 nm, respectively, after calcination. According to UV–visible diffuse reflectance spectroscopy, the evident energy band gap value of the SnO2–ZnO photocatalyst was estimated to be 3.23 eV to be compared with those of pure SnO2, that is, 3.7 eV, and Z...

Raman spectroscopy of graphene and bilayer under biaxial strain: bubbles and balloons.

Abstract: We use graphene bubbles to study the Raman spectrum of graphene under biaxial (e.g., isotropic) strain. Our Gruneisen parameters are in excellent agreement with the theoretical values. Discrepancy in the previously reported values is attributed to the interaction of graphene with the substrate. Bilayer balloons (intentionally pressurized membranes) have been used to avoid the effect of the substrate and to study the dependence of strain on the interlayer interactions.

Phonon Transport in Graphene

Abstract: Properties of phonons - quanta of the crystal lattice vibrations - in graphene have attracted strong attention of the physics and engineering communities. Acoustic phonons are the main heat carriers in graphene near room temperature while optical phonons are used for counting the number of atomic planes in Raman experiments with few-layer graphene. It was shown both theoretically and experimentally that transport properties of phonons, i.e. energy dispersion and scattering rates, are substantially different in the quasi two-dimensional system such as graphene compared to basal planes in graphite or three-dimensional bulk crystals. The unique nature of two-dimensional phonon transport translates to unusual heat conduction in graphene and related materials. In this review we outline different theoretical approaches developed for phonon transport in graphene, discuss contributions of the in-plane and cross-plane phonon modes and provide comparison with available experimental thermal conductivity data. Particular attention is given to analysis of recent theoretical results for the phonon thermal conductivity of graphene and few-layer graphene, and the effects of the strain, defects and isotopes on the phonon transport in these systems.

Rapid Characterization of Ultrathin Layers of Chalcogenides on SiO2/Si Substrates

Abstract: There has been emerging interest in exploring single-sheet 2D layered structures other than graphene to explore potentially interesting properties and phenomena. The preparation, isolation and rapid unambiguous characterization of large size ultrathin layers of MoS2, GaS, and GaSe deposited onto SiO2/Si substrates is reported. Optical color contrast is identified using reflection optical microscopy for layers with various thicknesses. The optical contrast of these thin layers is correlated with atomic force microscopy (AFM) and Raman spectroscopy to determine the exact thickness and to calculate number of the atomic layers present in the thin flakes and sheets. Collectively, optical microscopy, AFM, and Raman spectroscopy combined with Raman imaging data are analyzed to determine the thickness (and thus, the number of unit layers) of the MoS2, GaS, and GaSe ultrathin flakes in a fast, non-destructive, and unambiguous manner. These findings may enable experimental access to and unambiguous determination of layered chalcogenides for scientific exploration and potential technological applications.

Noble Metal Coated Single-Walled Carbon Nanotubes for Applications in Surface Enhanced Raman Scattering Imaging and Photothermal Therapy

Abstract: Single-walled carbon nanotubes (SWNTs) with various unique optical properties are interesting nanoprobes widely explored in biomedical imaging and phototherapies. Herein, DNA-functionalized SWNTs are modified with noble metal (Ag or Au) nanoparticles via an in situ solution phase synthesis method comprised of seed attachment, seeded growth, and surface modification with polyethylene glycol (PEG), yielding SWNT-Ag-PEG and SWNT-Au-PEG nanocomposites stable in physiological environments. With gold or silver nanoparticles decorated on the surface, the SWNT-metal nanocomposites gain an excellent concentration and excitation-source dependent surface-enhanced Raman scattering (SERS) effect. Using a near-infrared (NIR) laser as the excitation source, targeted Raman imaging of cancer cells labeled with folic acid (FA) conjugated SWNT-Au nanocomposite (SWNT-Au-PEG-FA) is realized, with images acquired in significantly shortened periods of time as compared to that of using nonenhanced SWNT Raman probes. Owing to the strong surface plasmon resonance absorption contributed by the gold shell, the SWNTs-Au-PEG-FA nanocomposite also offers remarkably improved photothermal cancer cell killing efficacy. This work presents a facile approach to synthesize water-soluble noble metal coated SWNTs with a strong SERS effect suitable for labeling and fast Raman spectroscopic imaging of biological samples, which has been rarely realized before. The SWNT-Au-PEG nanocomposite developed here may thus be an interesting optical theranostic probe for cancer imaging and therapy.

Vibrational Properties of CuO and Cu4O3 from First-Principles Calculations, and Raman and Infrared Spectroscopy

Abstract: A combined experimental and theoretical study is reported on the vibrational properties of tenorite CuO and paramelaconite Cu4O3. The optically active modes have been measured by Raman scattering and infrared absorption spectroscopy. First-principles calculations have been carried out with the LDA+U approach to account for strong electron correlation in the copper oxides. The vibrational properties have been computed ab initio using the so-called direct method. Excellent agreement is found between the measured Raman and infrared peak positions and the calculated phonon frequencies at the Brillouin zone center, which allows the assignment of all prominent peaks of the Cu4O3 spectra. Through a detailed analysis of the displacement eigenvectors, it is shown that a close relationship exists between the Raman modes of CuO and Cu4O3.

Raman spectra of titanium dioxide (anatase, rutile) with identified oxygen isotopes (16, 17, 18)

Abstract: Six representative isotope-labeled samples of titanium dioxide were synthesized: Ti(16)O(2), Ti(17)O(2) and Ti(18)O(2), each in anatase and rutile forms. Their Raman scattering was analyzed at temperatures down to 5 K. Spectral assignment was supported by numerical simulation using DFT calculations. The combination of experimental and theoretical Raman frequencies with the corresponding isotopic shifts allowed us to address various still-open questions about the second-order Raman scattering in rutile, and the analysis of overlapping features in the anatase spectrum.

Theory of double-resonant Raman spectra in graphene: intensity and line shape of defect-induced and two-phonon bands

Abstract: We calculate the double resonant (DR) Raman spectrum of graphene, and determine the lines associated to both phonon-defect processes, and two-phonons ones. Phonon and electronic dispersions reproduce calculations based on density functional theory corrected with GW. Electron-light, -phonon, and -defect scattering matrix elements and the electronic linewidth are explicitly calculated. Defect-induced processes are simulated by considering different kind of idealized defects. For an excitation energy of $\epsilon_L=2.4$ eV, the agreement with measurements is very good and calculations reproduce: the relative intensities among phonon-defect or among two-phonon lines; the measured small widths of the D, $D'$, 2D and $2D'$ lines; the line shapes; the presence of small intensity lines in the 1800, 2000 cm$^{-1}$ range. We determine how the spectra depend on the excitation energy, on the light polarization, on the electronic linewidth, on the kind of defects and on their concentration. According to the present findings, the intensity ratio between the $2D'$ and 2D lines can be used to determine experimentally the electronic linewidth. The intensity ratio between the $D$ and $D'$ lines depends on the kind of model defect, suggesting that this ratio could possibly be used to identify the kind of defects present in actual samples. Charged impurities outside the graphene plane provide an almost undetectable contribution to the Raman signal.

BiVO(4)/CeO(2) nanocomposites with high visible-light-induced photocatalytic activity.

Abstract: Preparation of bismuth vanadate and cerium dioxide (BiVO4/CeO2) nanocomposites as visible-light photocatalysts was successfully obtained by coupling a homogeneous precipitation method with hydrothermal techniques. The BiVO4/CeO2 nanocomposites with different mole ratios were synthesized and characterized by X-ray diffraction (XRD), Raman spectroscopy, and transmission electron microscopy (TEM). Absorption range and band gap energy, which are responsible for the observed photocatalyst behavior, were investigated by UV–vis diffuse reflectance (UV–vis DR) spectroscopy. Photocatalytic activities of the prepared samples were examined by studying the degradation of model dyes Methylene Blue, Methyl Orange, and a mixture of Methylene Blue and Methyl Orange solutions under visible-light irradiation (>400 nm). Results clearly show that the BiVO4/CeO2 nanocomposite in a 0.6:0.4 mol ratio exhibited the highest photocatalytic activity in dye wastewater treatment.

Controllable Synthesis of Submillimeter Single-Crystal Monolayer Graphene Domains on Copper Foils by Suppressing Nucleation

Abstract: Submillimeter single-crystal monolayer and multilayer graphene domains were prepared by an atmospheric pressure chemical vapor deposition method with suppressing nucleation on copper foils through an annealing procedure. A facile oxidation visualization method was applied to study the nucleation density and morphology of graphene domains on copper foils. Scanning electron microscopy, transmission electron microscopy, atomic force microscopy, polarized optical microscopy, and Raman spectra showed that the submillimeter graphene domains were monolayer single crystals.