Topic
Reaction rate constant
About: Reaction rate constant is a research topic. Over the lifetime, 42919 publications have been published within this topic receiving 1047932 citations. The topic is also known as: reaction rate coefficient.
Papers published on a yearly basis
Papers
More filters
TL;DR: In this paper, an electrochemical galvanostatic intermittent titration technique (GITT) is described which combines both transient and steady-state measurements to obtain kinetic properties of solid mixed-conducting electrodes, as well as thermodynamic data.
Abstract: An electrochemical galvanostatic intermittent titration technique (GITT) is described which combines both transient and steady‐state measurements to obtain kinetic properties of solid mixed‐conducting electrodes, as well as thermodynamic data. The derivation of quantities such as the chemical and component diffusion coefficients, the partial conductivity, the mobility, the thermodynamic enhancement factor, and the parabolic rate constant as a function of stoichiometry is presented. A description of the factors governing the equilibration of composition gradients in such phases is included. The technique is applied to the determination of the kinetic parameters of the compound which has a narrow composition range. For the chemical diffusion coefficient is at 360°C. This value is quite high, due to a large thermodynamic enhancement factor of . The lithium component diffusion coefficient is comparatively small at this composition, . The partial conductivity and electrical mobility of lithium are and , respectively, at the same stoichiometry and temperature. Because of the very large values of the chemical diffusion coefficient and the fact that 3 moles of lithium can react per mole of antimony, this system may be of interest for use in new types of secondary batteries.
1,482 citations
TL;DR: In this article, the effect of initial dye concentration, wood particle size and temperature on the initial sorption rate of Basic Blue 69 and Acid Blue 25 onto wood has been studied in terms of pseudo-second order, intraparticle diffusion and pseudo-first order chemical sorption processes.
1,404 citations
TL;DR: In this article, a method for determining chemical kinetic constants and diffusion coefficients by measuring the rates of decay of spontaneous concentration fluctuations was proposed, which is based on the principle that the rate of spontaneous microscopic fluctuations are determined by the same phenomenological rate coefficients as those of macroscopic departures from equilibrium which result from external perturbations.
Abstract: We describe a method for determining chemical kinetic constants and diffusion coefficients by measuring the rates of decay of spontaneous concentration fluctuations. The equilibrium of the system is not disturbed during the measurement. We measure the number of molecules of a specified type in a defined open volume as a function of time and compute the time course of the deviations from the thermodynamic mean concentration. The method is based on the principle that the rates of decay of spontaneous microscopic fluctuations are determined by the same phenomenological rate coefficients as those of macroscopic departures from equilibrium which result from external perturbations. Hence, an analysis of fluctuations yields the same chemical rate constants and diffusion coefficients as are measured by conventional procedures. In practice the number of the specified molecules is measured by a property such as absorbance or fluorescence which is specific and sensitive to chemical change. The sample volume is defined by a light beam which traverses the cell. As the molecules appear in or disappear from the light beam, either due to diffusion or chemical reaction, their concentration fluctuations give rise to corresponding fluctuations of the intensity of absorbed or emitted light. This paper presents the theory needed to derive chemical rate constants and diffusion coefficients from these fluctuations in light intensity. The theory is applied to three examples of general interest: pure diffusion in the absence of chemical reaction; the binding of a small rapidly diffusing ligand to a larger slowly diffusing macromolecule; and a unimolecular isomerization. The method should be especially useful in studying highly cooperative systems, relatively noncooperative systems with intermediate states closely spaced in free energy, small systems, and systems not readily subject to perturbations of state.
1,373 citations
TL;DR: It is proposed that the mechanism of the reaction involves the joining of short, homologous sites on the two strands followed by a fast, reversible zippering reaction with forward rate constant kt, which explains the temperature and the GC dependence.
1,355 citations
TL;DR: This paper describes the first experimental application of fluorescence correlation spectroscopy, a new method for determining chemical kinetic constants and diffusion coefficients by observing the time behaviour of the tiny concentration fluctuations which occur spontaneously in the reaction system even when it is in equilibrium.
Abstract: synopsis This paper describes the first experimental application of fluorescence correlation spectroscopy, a new method for determining chemical kinetic constants and diffusion coefficients. These quantities are measured by observing the time behavior of the tiny concentration fluctuations which occur spontaneously in the reaction system even when it is in equilibrium. The equilibrium of the system is not disturbed during the experiment. The diffusion coefficients and chemical rate constants which determine the average time behavior of these spontaneous fluctuations are the same as those sought by more conventional methods including temperature-jump or other perturbation tecliniques. The experiment consists essentially in measuring the variation with time of the number of molecules of specified reactants in a defined open volume of solution. The concentration of a reactant is measured by its fluorescence; the sample volume is defined by a focused laser beam which excites the fluorescence. The fluorescent emission fluctuates in proportion with the changes in the number of fluorescent molecules as they diffuse into and out of the sample volume and as they are created or eliminated by the chemical reactions. The number of these reactant molecules must be small to permit detection of the concentration fluctuations. Hence the sample volume is small (10-8 rnl) and the concentration of the solutes is low (-10-9 M). We have applied this technique to the study of two prototype systems: the simple example of pure diffusion of a single fluorescent species, rhodamine 6G, and the more interesting but more challenging example of the reaction of macromolecular DNA with the drug ethidium bromide to form a fluorescent complex. The increase of the fluorescence of the ethidium bromide upon formation of the complex permits the observation of the decay of concentration fluctuations via the chemical reaction and consequently the determination of chemical rate constants.
1,289 citations