Showing papers on "Renewable energy published in 2010"

Solar Water Splitting Cells

Abstract: Energy harvested directly from sunlight offers a desirable approach toward fulfilling, with minimal environmental impact, the need for clean energy. Solar energy is a decentralized and inexhaustible natural resource, with the magnitude of the available solar power striking the earth’s surface at any one instant equal to 130 million 500 MW power plants.1 However, several important goals need to be met to fully utilize solar energy for the global energy demand. First, the means for solar energy conversion, storage, and distribution should be environmentally benign, i.e. protecting ecosystems instead of steadily weakening them. The next important goal is to provide a stable, constant energy flux. Due to the daily and seasonal variability in renewable energy sources such as sunlight, energy harvested from the sun needs to be efficiently converted into chemical fuel that can be stored, transported, and used upon demand. The biggest challenge is whether or not these goals can be met in a costeffective way on the terawatt scale.2

Biofuels from microalgae—A review of technologies for production, processing, and extractions of biofuels and co-products

Abstract: Sustainability is a key principle in natural resource management, and it involves operational efficiency, minimisation of environmental impact and socio-economic considerations; all of which are interdependent. It has become increasingly obvious that continued reliance on fossil fuel energy resources is unsustainable, owing to both depleting world reserves and the green house gas emissions associated with their use. Therefore, there are vigorous research initiatives aimed at developing alternative renewable and potentially carbon neutral solid, liquid and gaseous biofuels as alternative energy resources. However, alternate energy resources akin to first generation biofuels derived from terrestrial crops such as sugarcane, sugar beet, maize and rapeseed place an enormous strain on world food markets, contribute to water shortages and precipitate the destruction of the world's forests. Second generation biofuels derived from lignocellulosic agriculture and forest residues and from non-food crop feedstocks address some of the above problems; however there is concern over competing land use or required land use changes. Therefore, based on current knowledge and technology projections, third generation biofuels specifically derived from microalgae are considered to be a technically viable alternative energy resource that is devoid of the major drawbacks associated with first and second generation biofuels. Microalgae are photosynthetic microorganisms with simple growing requirements (light, sugars, CO 2 , N, P, and K) that can produce lipids, proteins and carbohydrates in large amounts over short periods of time. These products can be processed into both biofuels and valuable co-products. This study reviewed the technologies underpinning microalgae-to-biofuels systems, focusing on the biomass production, harvesting, conversion technologies, and the extraction of useful co-products. It also reviewed the synergistic coupling of microalgae propagation with carbon sequestration and wastewater treatment potential for mitigation of environmental impacts associated with energy conversion and utilisation. It was found that, whereas there are outstanding issues related to photosynthetic efficiencies and biomass output, microalgae-derived biofuels could progressively substitute a significant proportion of the fossil fuels required to meet the growing energy demand.

The Catalytic Valorization of Lignin for the Production of Renewable Chemicals

Abstract: Biomass is an important feedstock for the renewable production of fuels, chemicals, and energy. As of 2005, over 3% of the total energy consumption in the United States was supplied by biomass, and it recently surpassed hydroelectric energy as the largest domestic source of renewable energy. Similarly, the European Union received 66.1% of its renewable energy from biomass, which thus surpassed the total combined contribution from hydropower, wind power, geothermal energy, and solar power. In addition to energy, the production of chemicals from biomass is also essential; indeed, the only renewable source of liquid transportation fuels is currently obtained from biomass.

Biogas production: current state and perspectives

Abstract: Anaerobic digestion of energy crops, residues, and wastes is of increasing interest in order to reduce the greenhouse gas emissions and to facilitate a sustainable development of energy supply. Production of biogas provides a versatile carrier of renewable energy, as methane can be used for replacement of fossil fuels in both heat and power generation and as a vehicle fuel. For biogas production, various process types are applied which can be classified in wet and dry fermentation systems. Most often applied are wet digester systems using vertical stirred tank digester with different stirrer types dependent on the origin of the feedstock. Biogas is mainly utilized in engine-based combined heat and power plants, whereas microgas turbines and fuel cells are expensive alternatives which need further development work for reducing the costs and increasing their reliability. Gas upgrading and utilization as renewable vehicle fuel or injection into the natural gas grid is of increasing interest because the gas can be used in a more efficient way. The digestate from anaerobic fermentation is a valuable fertilizer due to the increased availability of nitrogen and the better short-term fertilization effect. Anaerobic treatment minimizes the survival of pathogens which is important for using the digested residue as fertilizer. This paper reviews the current state and perspectives of biogas production, including the biochemical parameters and feedstocks which influence the efficiency and reliability of the microbial conversion and gas yield.

State of the art on high temperature thermal energy storage for power generation. Part 1—Concepts, materials and modellization

Abstract: Concentrated solar thermal power generation is becoming a very attractive renewable energy production system among all the different renewable options, as it has have a better potential for dispatchability. This dispatchability is inevitably linked with an efficient and cost-effective thermal storage system. Thus, of all components, thermal storage is a key one. However, it is also one of the less developed. Only a few plants in the world have tested high temperature thermal energy storage systems. In this paper, the different storage concepts are reviewed and classified. All materials considered in literature or plants are listed. And finally, modellization of such systems is reviewed.

High-flux solar-driven thermochemical dissociation of CO2 and H2O using nonstoichiometric ceria

Abstract: Because solar energy is available in large excess relative to current rates of energy consumption, effective conversion of this renewable yet intermittent resource into a transportable and dispatchable chemical fuel may ensure the goal of a sustainable energy future. However, low conversion efficiencies, particularly with CO_2 reduction, as well as utilization of precious materials have limited the practical generation of solar fuels. By using a solar cavity-receiver reactor, we combined the oxygen uptake and release capacity of cerium oxide and facile catalysis at elevated temperatures to thermochemically dissociate CO_2 and H_2O, yielding CO and H_2, respectively. Stable and rapid generation of fuel was demonstrated over 500 cycles. Solar-to-fuel efficiencies of 0.7 to 0.8% were achieved and shown to be largely limited by the system scale and design rather than by chemistry.

Optimal Renewable Resources Mix for Distribution System Energy Loss Minimization

Abstract: It is widely accepted that renewable energy sources are the key to a sustainable energy supply infrastructure since they are both inexhaustible and nonpolluting. A number of renewable energy technologies are now commercially available, the most notable being wind power, photovoltaic, solar thermal systems, biomass, and various forms of hydraulic power. In this paper, a methodology has been proposed for optimally allocating different types of renewable distributed generation (DG) units in the distribution system so as to minimize annual energy loss. The methodology is based on generating a probabilistic generation-load model that combines all possible operating conditions of the renewable DG units with their probabilities, hence accommodating this model in a deterministic planning problem. The planning problem is formulated as mixed integer nonlinear programming (MINLP), with an objective function for minimizing the system's annual energy losses. The constraints include the voltage limits, the feeders' capacity, the maximum penetration limit, and the discrete size of the available DG units. This proposed technique has been applied to a typical rural distribution system with different scenarios, including all possible combinations of the renewable DG units. The results show that a significant reduction in annual energy losses is achieved for all the proposed scenarios.

Prospects of CO2 Utilization via Direct Heterogeneous Electrochemical Reduction

Abstract: This Perspective highlights recent efforts and opportunities in the heterogeneous electrochemical conversion of carbon dioxide to help address the global issues of climate change and sustainable energy production. Recent research has shown that the electrochemical reduction of CO2 can produce a variety of organic compounds such as formic acid, carbon monoxide, methane, and ethylene with high current efficiency. These products can be used as feedstocks for chemical synthesis or converted into hydrocarbon fuels. This process is of interest (i) for the recycling of CO2 as an energy carrier, thereby reducing its accumulation in the atmosphere, (ii) for the production of renewable hydrocarbon fuels from CO2, water, and renewable electricity for use as transportation fuels, and (iii) as a convenient means of storing electrical energy in chemical form to level the electrical output from intermittent energy sources such as wind and solar. Accomplishments to date in this field of study have been encouraging, yet s...

Energy Storage Systems for Transport and Grid Applications

Abstract: Energy storage systems (ESSs) are enabling technologies for well-established and new applications such as power peak shaving, electric vehicles, integration of renewable energies, etc. This paper presents a review of ESSs for transport and grid applications, covering several aspects as the storage technology, the main applications, and the power converters used to operate some of the energy storage technologies. Special attention is given to the different applications, providing a deep description of the system and addressing the most suitable storage technology. The main objective of this paper is to introduce the subject and to give an updated reference to nonspecialist, academic, and engineers in the field of power electronics.

Renewable Energy Policies and Technological Innovation: Evidence Based on Patent Counts

Abstract: This paper examines the effect of environmental policies on technological innovation in the specific case of renewable energy. The analysis is conducted using patent data on a panel of 25 countries over the period 1978–2003. We find that public policy plays a significant role in determining patent applications. Different types of policy instruments are effective for different renewable energy sources. Broad-based policies, such as tradable energy certificates, are more likely to induce innovation on technologies that are close to competitive with fossil fuels. More targeted subsidies, such as feed-in tariffs, are needed to induce innovation on more costly energy technologies, such as solar power.

Future Energy Systems: Integrating Renewable Energy Sources into the Smart Power Grid Through Industrial Electronics

Abstract: This paper discusses about integrating renewable energy sources into the smart power grid through industrial electronics. This paper discusses photovoltaic power, wind energy conversion, hybrid energy systems, and tidal energy conversion.

Role of Energy Storage with Renewable Electricity Generation

Abstract: Renewable energy sources, such as wind and solar, have vast potential to reduce dependence on fossil fuels and greenhouse gas emissions in the electric sector. Climate change concerns, state initiatives including renewable portfolio standards, and consumer efforts are resulting in increased deployments of both technologies. Both solar photovoltaics (PV) and wind energy have variable and uncertain (sometimes referred to as intermittent) output, which are unlike the dispatchable sources used for the majority of electricity generation in the United States. The variability of these sources has led to concerns regarding the reliability of an electric grid that derives a large fraction of its energy from these sources as well as the cost of reliably integrating large amounts of variable generation into the electric grid. In this report, we explore the role of energy storage in the electricity grid, focusing on the effects of large-scale deployment of variable renewable sources (primarily wind and solar energy).

Impact of dust on solar photovoltaic (PV) performance: Research status, challenges and recommendations

Abstract: The peaking of most oil reserves and impending climate change are critically driving the adoption of solar photovoltaic's (PV) as a sustainable renewable and eco-friendly alternative. Ongoing material research has yet to find a breakthrough in significantly raising the conversion efficiency of commercial PV modules. The installation of PV systems for optimum yield is primarily dictated by its geographic location (latitude and available solar insolation) and installation design (tilt, orientation and altitude) to maximize solar exposure. However, once these parameters have been addressed appropriately, there are other depending factors that arise in determining the system performance (efficiency and output). Dust is the lesser acknowledged factor that significantly influences the performance of the PV installations. This paper provides an appraisal on the current status of research in studying the impact of dust on PV system performance and identifies challenges to further pertinent research. A framework to understand the various factors that govern the settling/assimilation of dust and likely mitigation measures have been discussed in this paper. (C) 2010 Elsevier Ltd. All rights reserved.

A review of wind power and wind speed forecasting methods with different time horizons

Abstract: In recent years, environmental considerations have prompted the use of wind power as a renewable energy resource. However, the biggest challenge in integrating wind power into the electric grid is its intermittency. One approach to deal with wind intermittency is forecasting future values of wind power production. Thus, several wind power or wind speed forecasting methods have been reported in the literature over the past few years. This paper provides insight on the foremost forecasting techniques, associated with wind power and speed, based on numeric weather prediction (NWP), statistical approaches, artificial neural network (ANN) and hybrid techniques over different time-scales. An overview of comparative analysis of various available forecasting techniques is discussed as well. In addition, this paper further gives emphasis on the major challenges and problems associated with wind power prediction.

Nanofluid-based direct absorption solar collector

Abstract: Solar energy is one of the best sources of renewable energy with minimal environmental impact. Direct absorption solar collectors have been proposed for a variety of applications such as water heating; however the efficiency of these collectors is limited by the absorption properties of the working fluid, which is very poor for typical fluids used in solar collectors. It has been shown that mixing nanoparticles in a liquid (nanofluid) has a dramatic effect on the liquid thermophysical properties such as thermal conductivity. Nanoparticles also offer the potential of improving the radiative properties of liquids, leading to an increase in the efficiency of direct absorption solar collectors. Here we report on the experimental results on solar collectors based on nanofluids made from a variety of nanoparticles (carbon nanotubes, graphite, and silver). We demonstrate efficiency improvements of up to 5% in solar thermal collectors by utilizing nanofluids as the absorption mechanism. In addition the experiment...

Thermolysis of waste plastics to liquid fuel: A suitable method for plastic waste management and manufacture of value added products—A world prospective

Abstract: The present rate of economic growth is unsustainable without saving of fossil energy like crude oil, natural gas or coal. Thus mankind has to rely on the alternate/renewable energy sources like biomass, hydropower, geothermal energy, wind energy, solar energy, nuclear energy, etc. On the other hand, suitable waste management strategy is another important aspect of sustainable development. The growth of welfare levels in modern society during the past decades has brought about a huge increase in the production of all kinds of commodities, which indirectly generate waste. Plastics have been one of the materials with the fastest growth because of their wide range of applications due to versatility and relatively low cost. Since the duration of life of plastic products is relatively small, there is a vast plastics waste stream that reaches each year to the final recipients creating a serious environmental problem. Again, because disposal of post consumer plastics is increasingly being constrained by legislation and escalating costs, there is considerable demand for alternatives to disposal or land filling. Advanced research in the field of green chemistry could yield biodegradable/green polymers but is too limited at this point of time to substitute the non-biodegradable plastics in different applications. Once standards are developed for degradable plastics they can be used to evaluate the specific formulations of materials which will find best application in this state as regards their performance and use characteristics. Among the alternatives available are source reduction, reuse, recycling, and recovery of the inherent energy value through waste-to-energy incineration and processed fuel applications. Production of liquid fuel would be a better alternative as the calorific value of the plastics is comparable to that of fuels, around 40 MJ/kg. Each of these options potentially reduces waste and conserves natural resources. Plastics recycling, continues to progress with a wide range of old and new technologies. Many research projects have been undertaken on chemical recycling of waste plastics to fuel and monomer. This is also reflected by a number of pilot, demonstration, and commercial plants processing various types of plastic wastes in Germany, Japan, USA, India, and elsewhere. Further investigations are required to enhance the generation of value added products (fuel) with low investments without affecting the environment. The paper reviews the available literature in this field of active research and identifies the gaps that need further attention.

Distributed energy resources and benefits to the environment

Abstract: The recently released report of the International Energy Outlook (IEO2009) projects an increase of 44% in the world energy demand from 2006 to 2030, and 77% rise in the net electricity generation worldwide in the same period. However, threatening in the said report is that 80% of the total generation in 2030 would be produced from fossil fuels. This global dependence on fossil fuels is dangerous to our environment in terms of their emissions unless specific policies and measures are put in place. Nevertheless, recent research reveals that a reduction in the emissions of these gases is possible with widespread adoption of distributed generation (DG) technologies that feed on renewable energy sources, in the generation of electric power. This paper gives a detailed overview of distributed energy resources technologies, and also discusses the devastating impacts of the conventional power plants feeding on fossil fuels to our environment. The study finally justifies how DG technologies could substantially reduce greenhouse gas emissions when fully adopted; hence, reducing the public concerns over human health risks caused by the conventional method of electricity generation.

Hydrogen: the future energy carrier

Abstract: Since the beginning of the twenty-first century the limitations of the fossil age with regard to the continuing growth of energy demand, the peaking mining rate of oil, the growing impact of CO2 emissions on the environment and the dependency of the economy in the industrialized world on the availability of fossil fuels became very obvious. A major change in the energy economy from fossil energy carriers to renewable energy fluxes is necessary. The main challenge is to efficiently convert renewable energy into electricity and the storage of electricity or the production of a synthetic fuel. Hydrogen is produced from water by electricity through an electrolyser. The storage of hydrogen in its molecular or atomic form is a materials challenge. Some hydrides are known to exhibit a hydrogen density comparable to oil; however, these hydrides require a sophisticated storage system. The system energy density is significantly smaller than the energy density of fossil fuels. An interesting alternative to the direct storage of hydrogen are synthetic hydrocarbons produced from hydrogen and CO2 extracted from the atmosphere. They are CO2 neutral and stored like fossil fuels. Conventional combustion engines and turbines can be used in order to convert the stored energy into work and heat.