Representative elementary volume

About: Representative elementary volume is a research topic. Over the lifetime, 4105 publications have been published within this topic receiving 86863 citations.

Gradient crystal plasticity as part of the computational modelling of polycrystals

Abstract: This paper describes how gradient hardening can, in a thermodynamically consistent fashion, be included into a crystal plasticity model. By assuming that the inelastic part of the free energy includes contributions from the gradient of hardening along each slip direction, a hardening stress due to the second derivative of the hardening along each slip direction can be derived. For a finite element model of the grain structure a coupled problem with displacements and gradient hardening variables as degrees of freedom is thereby obtained. This problem is solved using a dual mixed approach. In particular, an algorithm suitable for parallelization is presented, where each grain is treated as a subproblem. The numerical results show that the macroscopic strength increases with decreasing grain size as a result of gradient hardening. Finally, the results of different prolongation assumptions, i.e. how to impose the macroscopic deformation gradient on a representative volume element, are compared.

A determination of the minimum sizes of representative volume elements for the prediction of cortical bone elastic properties

Abstract: At its highest level of microstructural organization—the mesoscale or millimeter scale—cortical bone exhibits a heterogeneous distribution of pores (Haversian canals, resorption cavities). Multi-scale mechanical models rely on the definition of a representative volume element (RVE). Analytical homogenization techniques are usually based on an idealized RVE microstructure, while finite element homogenization using high-resolution images is based on a realistic RVE of finite size. The objective of this paper was to quantify the size and content of possible cortical bone mesoscale RVEs. RVE size was defined as the minimum size: (1) for which the apparent (homogenized) stiffness tensor becomes independent of the applied boundary conditions or (2) for which the variance of elastic properties for a set of microstructure realizations is sufficiently small. The field of elastic coefficients and microstructure in RVEs was derived from one acoustic microscopy image of a human femur cortical bone sample with an overall porosity of 8.5%. The homogenized properties of RVEs were computed with a finite element technique. It was found that the size of the RVE representative of the overall tissue is about 1.5 mm. Smaller RVEs (~0.5 mm) can also be considered to estimate local mesoscopic properties that strongly depend on the local pores volume fraction. This result provides a sound basis for the application of homogenization techniques to model the heterogeneity of cortical microstructures. An application of the findings to estimate elastic properties in the case of a porosity gradient is briefly presented.

Effects of inter-fibre spacing on damage evolution in unidirectional (UD) fibre-reinforced composites

Abstract: A three dimensional (3D) micromechanical study has been performed in order to investigate local damage in UD composite materials under transverse and longitudinal tensile loading. In particular, the influence of non-uniform distribution of fibres in RVEs (representative volume element) with a hexagonal packing array and the effects of thermal residual stresses has been investigated. To examine the effect of inter-fibre spacing and residual stress on failure, a study based on the Maximum Principal Stress failure criterion and a stiffness degradation technique has been used for damage analysis of the unit cell subjected to mechanical loading. Results indicate a strong dependence of damage onset and its evolution from the fibres position within the RVE. Predicted mechanical properties, damage initiation and evolution are also clearly influenced by the presence of residual stress.

Finite element analysis of natural fibers composites: A review

Abstract: Abstract Natural fiber composites (NFCs) also termed as biocomposites offer an alternative to the existing synthetic fiber composites, due to their advantages such as abundance in nature, relatively low cost, lightweight, high strength-to-weight ratio, and most importantly their environmental aspects such as biodegradability, renewability, recyclability, and sustainability. Researchers are investigating in depth the properties of NFC to identify their reliability and accessibility for being involved in aircrafts, automotive, marine, sports’ equipment, and other engineering fields. Modeling and simulation (M&S) of NFCs is a valuable method that contributes in enhancing the design and performance of natural fibers composite. Recently many researchers have applied finite element analysis to analyze NFCs’ characteristics. This article aims to present a comprehensive review on recent developments in M&S of NFCs through classifying the research according to the analysis type, NFC type, model type, simulation platform and parameters, and research outcomes, shedding the light on the main applicable theories and methods in this area, aiming to let more experts know the current research status and also provide some guidance for relevant researches.