Topic
Responsivity
About: Responsivity is a research topic. Over the lifetime, 9918 publications have been published within this topic receiving 186118 citations.
Papers published on a yearly basis
Papers
More filters
TL;DR: In this paper, a low-strain quantum dots-in-a-well (DWELL) infrared photodetector was proposed to minimize the inclusion of the lattice-mismatched indium-containing compounds while maximizing the absorption cross section by enabling larger active region volume.
Abstract: The authors report the design, growth, fabrication, and characterization of a low-strain quantum dots-in-a-well (DWELL) infrared photodetector. This novel DWELL design minimizes the inclusion of the lattice-mismatched indium-containing compounds while maximizing the absorption cross section by enabling larger active region volume. The improved structure uses an In0.15Ga0.85As∕GaAs double well structure with Al0.10Ga0.90As as the barrier. Each layer in the active region was optimized for device performance. Detector structures grown using molecular beam epitaxy were processed and characterized. This new design offers high responsivity of 3.9A∕W at a bias of 2.2V and a detectivity of 3×109 Jones at a bias of 2.2V for a wavelength of 8.9μm. These detectors offer significant improvement in the responsivity while retaining the long wave infrared spectral properties of the InAs∕In0.15Ga0.85As∕GaAs DWELL. These detectors if coupled with improved noise characteristics could enable higher temperature operation of ...
56 citations
TL;DR: A physical model based on band energy theory is proposed to explain the origin of the self-driven photoresponse characteristic in the present self-powered ZnS NTs-based UV nano-photodetector.
Abstract: In this study, we design and demonstrate a novel type of self-powered UV photodetectors (PDs) using single-crystalline ZnS nanotubes (NTs) as the photodetecting layer and Ag nanowires (NWs) network as transparent electrodes. The self-powered UV PDs with asymmetric metal-semiconductor-metal (MSM) structure exhibit attractive photovoltaic characteristic at 0 V bias. Device performance analysis reveals that the as-assembled PDs have a high on/off ratio of 19173 and a fast response speed (τr = 0.09 s, τf = 0.07 s) without any external bias. These values are even higher than that of ZnS nanostructures- and ZnS heterostructure-based PDs at a large bias voltage. Besides, its UV sensivity, responsivity and detectivity at self-powered mode can reach as high as 19172, 2.56 A/W and 1.67 × 1010 cm Hz1/2 W−1, respectively. In addition, the photosensing performance of the self-powered UV PDs is studied in different ambient conditions (e.g., in air and vacuum). Moreover, a physical model based on band energy theory is proposed to explain the origin of the self-driven photoresponse characteristic in our device. The totality of the above study signifies that the present self-powered ZnS NTs-based UV nano-photodetector may have promising application in future self-powered optoelectronic devices and integrated systems.
56 citations
TL;DR: In this article, a GaAs/InGaAs far-infrared quantum well photodetectors based on a bound-to-continuum intersubband transition with a (zero response) cutoff wavelength of 35 μm are reported.
Abstract: GaAs/InGaAs far-infrared quantum well photodetectors based on a bound-to-continuum intersubband transition with a (zero response) cutoff wavelength of 35 μm are reported. A peak responsivity of 0.45 A/W and detectivity of 6.0×109 cmHz/W at a wavelength of 31 μm and a temperature of 4.2 K have been experimentally achieved. Infrared response was observed at temperatures up to 18 K. A calculated responsivity spectrum using a bound-to-continuum line shape corrected for phonon absorption is fitted to the experimental response. The calculated line shape without absorption gives a cutoff wavelength of 38 μm with a peak responsivity of 0.50 A/W and a detectivity of 6.6×109 cmHz/W at 32 μm.
55 citations
TL;DR: The graphene/single GaAs nanowire Schottky junction photovoltaic device demonstrated here is promising for self-powered high-speed photodetectors and low-cost high-efficiency solar cells.
Abstract: A graphene/nanowire Schottky junction is a promising structure for low-cost high-performance optoelectronic devices. Here we demonstrate a graphene/single GaAs nanowire Schottky junction photovoltaic device. The Schottky junction is fabricated by covering a single layer graphene onto an n-doped GaAs nanowire. Under 532 nm laser excitation, the device exhibits a high responsivity of 231 mA W-1 and a short response/recover time of 85/118 μs at zero bias. Under AM 1.5 G solar illumination, the device has an open-circuit voltage of 75.0 mV and a short-circuit current density of 425 mA cm-2, yielding a remarkable conversion efficiency of 8.8%. The excellent photovoltaic performance of the device is attributed to the strong built-in electric field in the Schottky junction as well as the transparent property of graphene. The device is promising for self-powered high-speed photodetectors and low-cost high-efficiency solar cells.
55 citations
TL;DR: The proposed device has demonstrated exceptionally low dark current, therefore low noise, and high detectivity, and excellent specific detectivity (D*) up to approximately 3 x 10(8)CmHz(1/ 2)/W is achieved at room temperature.
Abstract: In this paper we present a novel long wave length infrared quantum dot photodetector. A cubic shaped 6nm GaN quantum dot (QD) within a large 18 nm Al0.2Ga0.8N QD (capping layer) embedded in Al0.8Ga0.2N has been considered as the unit cell of the active layer of the device. Single band effective mass approximation has been applied in order to calculate the QD electronic structure. The temperature dependent behavior of the responsivity and dark current were presented and discussed for different applied electric fields. The capping layer has been proposed to improve upon the dark current of the detector. The proposed device has demonstrated exceptionally low dark current, therefore low noise, and high detectivity. Excellent specific detectivity (D*) up to ~3 × 108CmHz1/ 2/W is achieved at room temperature.
55 citations