Responsivity

About: Responsivity is a research topic. Over the lifetime, 9918 publications have been published within this topic receiving 186118 citations.

Plasmonic enhanced quantum well infrared photodetector with high detectivity

Abstract: We report a normal-incident quantum well infrared photodetector (QWIP) strongly coupled with surface plasmon modes. A periodic hole array perforated in gold film was integrated with In0.53Ga0.47As/InP QWIP to convert normal-incident electromagnetic waves into surface plasmon waves, and to excite the intersubband transition of carriers in the quantum wells. The peak responsivity of the photodetector at ∼8 μm was ∼7 A/W at the bias of 0.7 V at 78 K with the peak detectivity as high as ∼7.4×1010 cm Hz1/2/W. The full width at half maximum of the response spectrum was only ∼0.84 μm due to a narrow plasmonic resonance.

Solution‐Processed MoS2/Organolead Trihalide Perovskite Photodetectors

Abstract: Integration of organic/inorganic hybrid perovskites with metallic or semiconducting phases of 2D MoS2 nanosheets via solution processing is demonstrated. The results show that the collection of charge carriers is strongly dependent on the electronic properties of the 2D MoS2 with metallic MoS2 showing high responsivity and the semiconducting phase exhibiting high on/off ratios.

Synergistic Effects of Plasmonics and Electron Trapping in Graphene Short-Wave Infrared Photodetectors with Ultrahigh Responsivity.

Abstract: Graphene’s unique electronic and optical properties have made it an attractive material for developing ultrafast short-wave infrared (SWIR) photodetectors. However, the performance of graphene SWIR photodetectors has been limited by the low optical absorption of graphene as well as the ultrashort lifetime of photoinduced carriers. Here, we present two mechanisms to overcome these two shortages and demonstrate a graphene-based SWIR photodetector with high responsivity and fast photoresponse. In particular, a vertical built-in field is employed in the graphene channel for trapping the photoinduced electrons and leaving holes in graphene, which results in prolonged photoinduced carrier lifetime. On the other hand, plasmonic effects were employed to realize photon trapping and enhance the light absorption of graphene. Thanks to the above two mechanisms, the responsivity of this proposed SWIR photodetector is up to a record of 83 A/W at a wavelength of 1.55 μm with a fast rising time of less than 600 ns. This ...

Multifunctional graphene optical modulator and photodetector integrated on silicon waveguides

Abstract: For optical communication, information is converted between optical and electrical signal domains at a high rate. The devices to achieve such a conversion are various types of electro-optical modulators and photodetectors. These two types of optoelectronic devices, equally important, require different materials and consequently it has been challenging to realize both using a single material combination, especially in a way that can be integrated on the ubiquitous silicon platform. Graphene, with its gapless band structure, stands out as a unique optoelectronic material that allows both photodetection and optical modulation. Here, we demonstrate a single graphene-based device that simultaneously provides both efficient optical modulation and photodetection. The graphene device is integrated on a silicon waveguide and is tunable with a gate made from another layer of graphene to achieve near-infrared photodetection responsivity of 57 mA/W and modulation depth of 64%. This novel multifunctional device may lead to many unprecedented optoelectronic applications.

Schottky barrier photodetector based on Mg‐doped p‐type GaN films

Abstract: In this letter we report the fabrication and characterization of Schottky barrier photodetectors on p‐type GaN films. These films were grown over basal plane sapphire substrates using low pressure metalorganic chemical vapor deposition and magnesium as the p‐type dopant. The current‐voltage and capacitance‐voltage characteristics were measured for Ti/Au Schottky barriers for a film with a p doping of 7×1017 cm−3. We measured a 1.5 V forward turn on and a 3 V reverse breakdown. The zero bias responsivity of a detector with 1 mm2 area was measured to be 0.13 A/W. For these photovoltaic detectors, the photoresponse was nearly constant from 200 to 365 nm and fell sharply by several orders of magnitude for wavelengths above 365 nm.