Topic
Rolling resistance
About: Rolling resistance is a research topic. Over the lifetime, 4801 publications have been published within this topic receiving 47958 citations. The topic is also known as: rolling drag & rolling friction force.
Papers published on a yearly basis
Papers
More filters
Book•
13 Dec 1978
TL;DR: In this article, the authors present an approach to the prediction of normal pressure distribution under a track and a simplified method for analysis of tracked vehicle performance, based on the Cone Index.
Abstract: Preface. Preface to the Third Edition. Preface to the Second Edition. Preface to the First Edition. Conversion Factors. Nomenclature. Introduction. 1. MECHANICS OF PNEUMATIC TIRES. 1.1 Tire Forces and Moments. 1.2 Rolling Resistance of Tires. 1.3 Tractive (Braking) Effort and Longitudinal Slip (Skid). 1.4 Cornering Properties of Tires. 1.4.1 Slip Angle and Cornering Force. 1.4.2 Slip Angle and Aligning Torque. 1.4.3 Camber and Camber Thrust. 1.4.4 Characterization of Cornering Behavior of. Tires. 1.5 Performance of Tires on Wet Surfaces. 1.6 Ride Properties of Tires. References. Problems. 2. MECHANICS OF VEHICLE-TERRAIN INTERACTION--TERRAMECHANICS. 2.1 Distribution of Stresses in the Terrain Under Vehicular Loads. 2.2 Applications of the Theory of Plastic Equilibrium to the Mechanics of Vehicle--Terrain Interaction. 2.3 Empirical Methods for Predicting Off-Road Vehicle Performance. 2.3.1 Empirical Methods Based on the Cone Index. 2.3.2 Empirical Methods Based on the Mean Maximum Pressure. 2.4 Measurement and Characterization of Terrain Response. 2.4.1 Characterization of Pressure-Sinkage Relationship. 2.4.2 Characterization of the Response to Repetitive Loading. 2.4.3 Characterization of the Shear Stress-Shear Displacement Relationship. 2.5 A Simplified Method for Analysis of Tracked Vehicle Performance. 2.5.1 Motion Resistance of a Track. 2.5.2 Tractive Effort and Slip of a Track. 2.6 A Computer-Aided Method for Evaluating the Performance of Vehicles with Flexible Tracks. 2.6.1 Approach to the Prediction of Normal Pressure Distribution under a Track. 2.6.2 Approach to the Prediction of Shear Stress Distribution under a Track. 2.6.3 Prediction of Motion Resistance and Drawbar Pull as Functions of Track Slip. 2.6.4 Experimental Substantiation. 2.6.5 Applications to Parametric Analysis and Design Optimization. 2.7 A Computer-Aided Method for Evaluating the Performance of Vehicles with Long-Pitch Link Tracks. 2.7.1 Basic Approach. 2.7.2 Experimental Substantiation. 2.7.3 Applications to Parametric Analysis and Design Optimization. 2.8 Methods for Parametric Analysis of Wheeled Vehicle Performance. 2.8.1 Motion Resistance of a Rigid Wheel. 2.8.2 Motion Resistance of a Pneumatic Tire. 2.8.3 Tractive Effort and Slip of a Wheel. 2.9 A Computer-Aided Method for Evaluating the Performance of Off-Road Wheeled Vehicles. 2.9.1 Basic Approach. 2.9.2 Experimental Substantiation. 2.9.3 Applications to Parametric Analysis. 2.10 Finite Element and Discrete Element Methods for the Study of Vehicle-Terrain Interaction. 2.10.1 The Finite Element Method. 2.10.2 The Discrete (Distinct) Element Method. References. Problems. 3. PERFORMANCE CHARACTERISTICS OF ROAD VEHICLES. 3.1 Equation of Motion and Maximum Tractive Effort. 3.2 Aerodynamic Forces and Moments. 3.3 Vehicle Power Plant and Transmission Characteristics. 3.3.1 Internal Combustion Engines. 3.3.2 Electric Drives. 3.3.3 Hybrid Drives. 3.3.4 Fuel Cells. 3.3.5 Transmission Characteristics. 3.4 Vehicle Power Plant and Transmission Characteristics. 3.4.1 Power Plant Characteristics. 3.4.2 Transmission Characteristics. 3.5 Prediction of Vehicle Performance. 3.5.1 Acceleration Time and Distance. 3.5.2 Gradability. 3.6 Operating Fuel Economy. 3.7 Engine and Transmission Matching. 3.8 Braking Performance. 3.8.1 Braking Characteristics of a Two-Axle. Vehicle. 3.8.2 Braking Efficiency and Stopping Distance. 3.8.3 Braking Characteristics of a Tractor-Semitrailer. 3.8.4 Antilock Brake Systems. 3.8.5 Traction Control Systems. References. Problems. 4. PERFORMANCE CHARACTERISTICS OF OFF-ROAD VEHICLES. 4.1 Drawbar Performance. 4.1.1 Drawbar Pull and Drawbar Power. 4.1.2 Tractive Efficiency. 4.1.3 Four Wheel Drive. 4.1.5 Coefficient of Traction. 4.1.4 Weight-to-Power Ratio for Off-Road Vehicles. 4.2 Fuel Economy of Cross-Country Operations. 4.3 Transport Productivity and Transport Efficiency. 4.4 Mobility Map and Mobility Profile. 4.5 Selection of Vehicle Configurations for Off-Road Operations. References. Problems. 5. HANDLING CHARACTERISTICS OF ROAD VEHICLES. 5.1 Steering Geometry. 5.2 Steady-State Handling Characteristics of a Two-Axle Vehicle. 5.2.1 Neutral Steer. 5.2.2 Understeer. 5.2.3 Oversteer. 5.3 Steady-State Response to Steering Input. 5.3.1 Yaw Velocity Response. 5.3.2 Lateral Acceleration Response. 5.3.3 Curvature Response. 5.4 Testing of Handling Characteristics. 5.4.1 Constant Radius Test. 5.4.2 Constant Speed Test. 5.4.3 Constant Steer Angle Test. 5.5 Transient Response Characteristics. 5.6 Directional Stability. 5.6.1 Criteria for Directional Stability. 5.6.2 Vehicle Stability Control. 5.7 Steady-State Handling Characteristics of a Tractor-Semitrailer. 5.8 Simulation Models for the Directional Behavior of Articulated Road Vehicles. References. Problems. 6. STEERING OF TRACKED VEHICLES. 6.1 Simplified Analysis of the Kinetics of Skid-Steering. 6.2 Kinematics of Skid-Steering. 6.3 Skid-Steering at High Speeds. 6.4 A General Theory for Skid-Steering on Firm Ground. 6.4.1 Shear Displacement on the Track-Ground Interface. 6.4.2 Kinetics in a Steady-State Turning Maneuver. 6.4.3 Experimental Substantiation. 6.4.4 Coefficient of Lateral Resistance. 6.5 Power Consumption of Skid-Steering. 6.6 Steering Mechanisms for Tracked Vehicles. 6.6.1 Clutch/Brake Steering System. 6.6.2 Controlled Differential Steering System. 6.6.3 Planetary Gear Steering System. 6.7 Articulated Steering. References. Problems. 7. VEHICLE RIDE CHARACTERISTICS. 7.1 Human Response to Vibration. 7.1.1 International Standard ISO 2631-1:1985. 7.1.2 International Standard ISO 2631-1:1997. 7.2 Vehicle Ride Models. 7.2.1 Two-Degree-of-Freedom Vehicle Model for Sprung and Unsprung Mass. 7.2.2 Numerical Methods for Determining the Response of a Quarter-Car Model to Irregular Surface Profile Excitation. 7.2.3 Two-Degree-of-Freedom Vehicle Model for Pitch and Bounce. 7.3 Introduction to Random Vibration. 7.3.1 Surface Elevation Profile as a Random Function. 7.3.2 Frequency Response Function. 7.3.3 Evaluation of Vehicle Vibration in Relation to the Ride Comfort Criterion. 7.4 Active and Semi-Active Suspensions. References. Problems. 8. INTRODUCTION TO AIR-CUSHION VEHICLES. 8.1 Air-Cushion Systems and Their Performance. 8.1.1 Plenum Chamber. 8.1.2 Peripheral Jet. 8.2 Resistance of Air-Cushion Vehicles. 8.3 Suspension Characteristics of Air-Cushion Systems. 8.3.1 Heave (or Bounce) Stiffness. 8.3.2 Roll Stiffness. 8.4 Directional Control of Air-Cushion Vehicles. References. Problems. Index.
2,930 citations
TL;DR: In this article, the authors presented calculations on the global fuel energy consumption used to overcome friction in passenger cars in terms of friction in the engine, transmission, tires, and brakes.
1,198 citations
01 May 1968
TL;DR: In this paper, a model is developed for sliding and rolling friction that can be used in simulations of dynamic systems involving mechanical elements that are subject to friction, including coulomb friction and the so-called "stiction", as well as rolling friction are believed to be realistically simulated by the model.
Abstract: : A model is developed for sliding and rolling friction that can be used in simulations of dynamic systems involving mechanical elements that are subject to friction. Sound bases for the model are developed around the hypothesis that the origin of friction is in quasi static contact bonds that are continuously formed and subsequently broken. Sliding friction, including coulomb friction and the so-called 'stiction,' as well as rolling friction are believed to be realistically simulated by the model. The model has been proven to accurately simulate transient torque and rate measurements on ball bearings tested in the laboratory.
737 citations
TL;DR: In this article, the effect of rolling resistance at contacts was taken into account to simulate the microstructure of shear bands and the generation of large voids and the high gradient of particle rotation along the shear band boundaries.
Abstract: To simulate numerically the microstructure of shear bands, the distinct element method was modified such that the effect of rolling resistance at contacts could be taken into account. To this end, the relative movement by rolling is related to the relative rotation between two particles with a common contact, which makes it possible to generalize the conservation law of angular momentum for a more general case than the moments can be transmitted through contacts. Not only the generation of large voids inside a shear band but also the high gradient of particle rotation along the shear band boundaries can be reproduced, in a manner quite similar to those of natural granular soils, when the rolling resistance at contacts is considered. The development of columns is a common feature that appears in the strain hardening process, and buckling of the columns parallels the development of shear bands. The generation of large voids and the high gradient of particle rotation are produced as a result of the buckling of the columns.
694 citations
TL;DR: A review of the commonly used models for rolling resistance and a more general model is presented in this article, where the robustness of these models in reproducing rolling resistance effects arising from different physical situations was assessed by using several benchmarking test cases.
680 citations