Rotational speed

About: Rotational speed is a research topic. Over the lifetime, 23327 publications have been published within this topic receiving 151696 citations. The topic is also known as: speed of revolution & revolution rate.

System for restarting internal combustion engine when engine restart request occurs

Abstract: In a system, a starter includes a motor for rotatably driving an output shaft with a pinion and an actuator that shifts the pinion toward a ring gear to be engaged with the ring gear. A monitor unit monitors a rotational speed of the internal combustion engine. The rotational speed of the internal combustion engine drops after an automatic control for stop of the engine. When an engine restart request occurs with the rotational speed being within a preset range during the rotational speed of the internal combustion engine dropping by the automatic control for stop of the engine, a drive unit drives the actuator to shift the pinion toward the ring gear to be engaged with the ring gear. The drive unit rotatably drives the motor with the pinion being engaged with the ring gear to thereby crank the crankshaft.

Centrifugal compressor surge and speed control

Abstract: Previous work on stabilization of compressor surge is extended to include control of the angular velocity of the compressor. A low-order centrifugal compressor model is presented, where the states are mass flow, pressure rise, and rotational speed of the spool. Energy transfer considerations are used to develop a compressor characteristic. In order to stabilize equilibria to the left of the surge line, a close coupled valve is used in series with the compressor. Controllers for the valve pressure drop and spool speed are derived. Semiglobal exponential stability is proved using a Lyapunov argument.

Rotation of cells in an alternating electric field theory and experimental proof

Abstract: Protoplasts of Avena sativa rotate in an alternating electric field provided that at least two cells are located close to each other. An optimum frequency range (20 to 30 kHz) exists where rotation of all cells exposed to the field is observed. Below and above this frequency range, rotation of some cells is only occasionally observed. The angular velocity of rotation depends on the square of the electric field strength. At field strengths above the value leading to electrical breakdown of the cell membrane, rotation is no longer observed due to deterioration of the cells. The absolute value of the angular velocity of rotation at a given field strength depends on the arrangement of the cells in the electric field. A maximum value is obtained if the angle between the field direction and the line connecting the two cells is 45 degrees. With increasing distance between the two cells the rotation speed decreases. Furthermore, if two cells of different radii are positioned close to each other the cell with the smaller radius will rotate with a higher speed than the larger one. Rotation of cells in an alternating electric field is described theoretically by interaction between induced dipoles in adjacent cells. The optimum frequency range for rotation is related to the relaxation of the polarization process in the cell. The quadratic dependence of the angular velocity of rotation on the field strength results from the fact that the torque is the product of the external field and the induced dipole moment which is itself proportional to the external field. The theoretical and experimental results may be relevant for cyclosis (rotational streaming of cytoplasm) in living cells.