Routing protocol

About: Routing protocol is a research topic. Over the lifetime, 46593 publications have been published within this topic receiving 901846 citations.

A high-throughput path metric for multi-hop wireless routing

Abstract: This paper presents the expected transmission count metric (ETX), which finds high-throughput paths on multi-hop wireless networks. ETX minimizes the expected total number of packet transmissions (including retransmissions) required to successfully deliver a packet to the ultimate destination. The ETX metric incorporates the effects of link loss ratios, asymmetry in the loss ratios between the two directions of each link, and interference among the successive links of a path. In contrast, the minimum hop-count metric chooses arbitrarily among the different paths of the same minimum length, regardless of the often large differences in throughput among those paths, and ignoring the possibility that a longer path might offer higher throughput.This paper describes the design and implementation of ETX as a metric for the DSDV and DSR routing protocols, as well as modifications to DSDV and DSR which allow them to use ETX. Measurements taken from a 29-node 802.11b test-bed demonstrate the poor performance of minimum hop-count, illustrate the causes of that poor performance, and confirm that ETX improves performance. For long paths the throughput improvement is often a factor of two or more, suggesting that ETX will become more useful as networks grow larger and paths become longer.

A survey on routing protocols for wireless sensor networks

Abstract: Recent advances in wireless sensor networks have led to many new protocols specifically designed for sensor networks where energy awareness is an essential consideration. Most of the attention, however, has been given to the routing protocols since they might differ depending on the application and network architecture. This paper surveys recent routing protocols for sensor networks and presents a classification for the various approaches pursued. The three main categories explored in this paper are data-centric, hierarchical and location-based. Each routing protocol is described and discussed under the appropriate category. Moreover, protocols using contemporary methodologies such as network flow and quality of service modeling are also discussed. The paper concludes with open research issues. � 2003 Elsevier B.V. All rights reserved.

Principles and Practices of Interconnection Networks

Abstract: One of the greatest challenges faced by designers of digital systems is optimizing the communication and interconnection between system components. Interconnection networks offer an attractive and economical solution to this communication crisis and are fast becoming pervasive in digital systems. Current trends suggest that this communication bottleneck will be even more problematic when designing future generations of machines. Consequently, the anatomy of an interconnection network router and science of interconnection network design will only grow in importance in the coming years. This book offers a detailed and comprehensive presentation of the basic principles of interconnection network design, clearly illustrating them with numerous examples, chapter exercises, and case studies. It incorporates hardware-level descriptions of concepts, allowing a designer to see all the steps of the process from abstract design to concrete implementation. ·Case studies throughout the book draw on extensive author experience in designing interconnection networks over a period of more than twenty years, providing real world examples of what works, and what doesn't. ·Tightly couples concepts with implementation costs to facilitate a deeper understanding of the tradeoffs in the design of a practical network. ·A set of examples and exercises in every chapter help the reader to fully understand all the implications of every design decision. Table of Contents Chapter 1 Introduction to Interconnection Networks 1.1 Three Questions About Interconnection Networks 1.2 Uses of Interconnection Networks 1.3 Network Basics 1.4 History 1.5 Organization of this Book Chapter 2 A Simple Interconnection Network 2.1 Network Specifications and Constraints 2.2 Topology 2.3 Routing 2.4 Flow Control 2.5 Router Design 2.6 Performance Analysis 2.7 Exercises Chapter 3 Topology Basics 3.1 Nomenclature 3.2 Traffic Patterns 3.3 Performance 3.4 Packaging Cost 3.5 Case Study: The SGI Origin 2000 3.6 Bibliographic Notes 3.7 Exercises Chapter 4 Butterfly Networks 4.1 The Structure of Butterfly Networks 4.2 Isomorphic Butterflies 4.3 Performance and Packaging Cost 4.4 Path Diversity and Extra Stages 4.5 Case Study: The BBN Butterfly 4.6 Bibliographic Notes 4.7 Exercises Chapter 5 Torus Networks 5.1 The Structure of Torus Networks 5.2 Performance 5.3 Building Mesh and Torus Networks 5.4 Express Cubes 5.5 Case Study: The MIT J-Machine 5.6 Bibliographic Notes 5.7 Exercises Chapter 6 Non-Blocking Networks 6.1 Non-Blocking vs. Non-Interfering Networks 6.2 Crossbar Networks 6.3 Clos Networks 6.4 Benes Networks 6.5 Sorting Networks 6.6 Case Study: The Velio VC2002 (Zeus) Grooming Switch 6.7 Bibliographic Notes 6.8 Exercises Chapter 7 Slicing and Dicing 7.1 Concentrators and Distributors 7.2 Slicing and Dicing 7.3 Slicing Multistage Networks 7.4 Case Study: Bit Slicing in the Tiny Tera 7.5 Bibliographic Notes 7.6 Exercises Chapter 8 Routing Basics 8.1 A Routing Example 8.2 Taxonomy of Routing Algorithms 8.3 The Routing Relation 8.4 Deterministic Routing 8.5 Case Study: Dimension-Order Routing in the Cray T3D 8.6 Bibliographic Notes 8.7 Exercises Chapter 9 Oblivious Routing 9.1 Valiant's Randomized Routing Algorithm 9.2 Minimal Oblivious Routing 9.3 Load-Balanced Oblivious Routing 9.4 Analysis of Oblivious Routing 9.5 Case Study: Oblivious Routing in the Avici Terabit Switch Router(TSR) 9.6 Bibliographic Notes 9.7 Exercises Chapter 10 Adaptive Routing 10.1 Adaptive Routing Basics 10.2 Minimal Adaptive Routing 10.3 Fully Adaptive Routing 10.4 Load-Balanced Adaptive Routing 10.5 Search-Based Routing 10.6 Case Study: Adaptive Routing in the Thinking Machines CM-5 10.7 Bibliographic Notes 10.8 Exercises Chapter 11 Routing Mechanics 11.1 Table-Based Routing 11.2 Algorithmic Routing 11.3 Case Study: Oblivious Source Routing in the IBM Vulcan Network 11.4 Bibliographic Notes 11.5 Exercises Chapter 12 Flow Control Basics 12.1 Resources and Allocation Units 12.2 Bufferless Flow Control 12.3 Circuit Switching 12.4 Bibliographic Notes 12.5 Exercises Chapter 13 Buffered Flow Control 13.1 Packet-Buffer Flow Control 13.2 Flit-Buffer Flow Control 13.3 Buffer Management and Backpressure 13.4 Flit-Reservation Flow Control 13.5 Bibliographic Notes 13.6 Exercises Chapter 14 Deadlock and Livelock 14.1 Deadlock 14.2 Deadlock Avoidance 14.3 Adaptive Routing 14.4 Deadlock Recovery 14.5 Livelock 14.6 Case Study: Deadlock Avoidance in the Cray T3E 14.7 Bibliographic Notes 14.8 Exercises Chapter 15 Quality of Service 15.1 Service Classes and Service Contracts 15.2 Burstiness and Network Delays 15.3 Implementation of Guaranteed Services 15.4 Implementation of Best-Effort Services 15.5 Separation of Resources 15.6 Case Study: ATM Service Classes 15.7 Case Study: Virtual Networks in the Avici TSR 15.8 Bibliographic Notes 15.9 Exercises Chapter 16 Router Architecture 16.1 Basic Router Architecture 16.2 Stalls 16.3 Closing the Loop with Credits 16.4 Reallocating a Channel 16.5 Speculation and Lookahead 16.6 Flit and Credit Encoding 16.7 Case Study: The Alpha 21364 Router 16.8 Bibliographic Notes 16.9 Exercises Chapter 17 Router Datapath Components 17.1 Input Buffer Organization 17.2 Switches 17.3 Output Organization 17.4 Case Study: The Datapath of the IBM Colony Router 17.5 Bibliographic Notes 17.6 Exercises Chapter 18 Arbitration 18.1 Arbitration Timing 18.2 Fairness 18.3 Fixed Priority Arbiter 18.4 Variable Priority Iterative Arbiters 18.5 Matrix Arbiter 18.6 Queuing Arbiter 18.7 Exercises Chapter 19 Allocation 19.1 Representations 19.2 Exact Algorithms 19.3 Separable Allocators 19.4 Wavefront Allocator 19.5 Incremental vs. Batch Allocation 19.6 Multistage Allocation 19.7 Performance of Allocators 19.8 Case Study: The Tiny Tera Allocator 19.9 Bibliographic Notes 19.10 Exercises Chapter 20 Network Interfaces 20.1 Processor-Network Interface 20.2 Shared-Memory Interface 20.3 Line-Fabric Interface 20.4 Case Study: The MIT M-Machine Network Interface 20.5 Bibliographic Notes 20.6 Exercises Chapter 21 Error Control 411 21.1 Know Thy Enemy: Failure Modes and Fault Models 21.2 The Error Control Process: Detection, Containment, and Recovery 21.3 Link Level Error Control 21.4 Router Error Control 21.5 Network-Level Error Control 21.6 End-to-end Error Control 21.7 Bibliographic Notes 21.8 Exercises Chapter 22 Buses 22.1 Bus Basics 22.2 Bus Arbitration 22.3 High Performance Bus Protocol 22.4 From Buses to Networks 22.5 Case Study: The PCI Bus 22.6 Bibliographic Notes 22.7 Exercises Chapter 23 Performance Analysis 23.1 Measures of Interconnection Network Performance 23.2 Analysis 23.3 Validation 23.4 Case Study: Efficiency and Loss in the BBN Monarch Network 23.5 Bibliographic Notes 23.6 Exercises Chapter 24 Simulation 24.1 Levels of Detail 24.2 Network Workloads 24.3 Simulation Measurements 24.4 Simulator Design 24.5 Bibliographic Notes 24.6 Exercises Chapter 25 Simulation Examples 495 25.1 Routing 25.2 Flow Control Performance 25.3 Fault Tolerance Appendix A Nomenclature Appendix B Glossary Appendix C Network Simulator

Secure routing in wireless sensor networks: attacks and countermeasures

Abstract: We consider routing security in wireless sensor networks. Many sensor network routing protocols have been proposed, but none of them have been designed with security as a goal. We propose security goals for routing in sensor networks, show how attacks against ad-hoc and peer-to-peer networks can be adapted into powerful attacks against sensor networks, introduce two classes of novel attacks against sensor networks sinkholes and HELLO floods, and analyze the security of all the major sensor network routing protocols. We describe crippling attacks against all of them and suggest countermeasures and design considerations. This is the first such analysis of secure routing in sensor networks.

DSR: the dynamic source routing protocol for multihop wireless ad hoc networks

Abstract: The Dynamic Source Routing protocol (DSR) is a simple and efficient routing protocol designed specifically for use in multi-hop wireless ad hoc networks of mobile nodes. DSR allows the network to be completely self-organizing and self-configuring, without the need for any existing network infrastructure or administration. The protocol is composed of the two mechanisms of Route Discovery and Route Maintenance, which work together to allow nodes to discover and maintain source routes to arbitrary destinations in the ad hoc network. The use of source routing allows packet routing to be trivially loop-free, avoids the need for up-to-date routing information in the intermediate nodes through which packets are forwarded, and allows nodes forwarding or overhearing packets to cache the routing information in them for their own future use. All aspects of the protocol operate entirely on-demand, allowing the routing packet overhead of DSR to scale automatically to only that needed to react to changes in the routes currently in use. We have evaluated the operation of DSR through detailed simulation on a variety of movement and communication patterns, and through implementation and significant experimentation in a physical outdoor ad hoc networking testbed we have constructed in Pittsburgh, and have demonstrated the excellent performance of the protocol. In this chapter, we describe the design of DSR and provide a summary of some of our simulation and testbed implementation results for the protocol.