Showing papers on "Routing table published in 2001"

Ad hoc positioning system (APS)

Abstract: Many ad hoc network protocols and applications assume the knowledge of geographic location of nodes. The absolute location of each networked node is an assumed fact by most sensor networks which can then present the sensed information on a geographical map. Finding location without the aid of GPS in each node of an ad hoc network is important in cases where GPS is either not accessible, or not practical to use due to power, form factor or line of sight conditions. Location would also enable routing in sufficiently isotropic large networks, without the use of large routing tables. We are proposing APS - a distributed, hop by hop positioning algorithm, that works as an extension of both distance vector routing and GPS positioning in order to provide approximate location for all nodes in a network where only a limited fraction of nodes have self location capability.

A survey on position-based routing in mobile ad hoc networks

Abstract: We present an overview of ad hoc routing protocols that make forwarding decisions based on the geographical position of a packet's destination. Other than the destination's position, each node need know only its own position and the position of its one-hop neighbors in order to forward packets. Since it is not necessary to maintain explicit routes, position-based routing does scale well even if the network is highly dynamic. This is a major advantage in a mobile ad hoc network where the topology may change frequently. The main prerequisite for position-based routing is that a sender can obtain the current position of the destination. Therefore, previously proposed location services are discussed in addition to position-based packet forwarding strategies. We provide a qualitative comparison of the approaches in both areas and investigate opportunities for future research.

On inferring autonomous system relationships in the internet

Abstract: The Internet consists of rapidly increasing number of hosts interconnected by constantly evolving networks of links and routers. Interdomain routing in the Internet is coordinated by the Border Gateway Protocol (BGP). The BGP allows each autonomous system (AS) to choose its own administrative policy in selecting routes and propagating reachability information to others. These routing policies are constrained by the contractual commercial agreements between administrative domains. For example, an AS sets its policy so that it does not provide transit services between its providers. Such policies imply that AS relationships are an important aspect of the Internet structure. We propose an augmented AS graph representation that classifies AS relationships into customer-provider, peering, and sibling relationships. We classify the types of routes that can appear in BGP routing tables based on the relationships between the ASs in the path and present heuristic algorithms that infer AS relationships from BGP routing tables. The algorithms are tested on publicly available BGP routing tables. We verify our inference results with AT&T internal information on its relationship with neighboring ASs. As much as 99.1% of our inference results are confirmed by the AT&T internal information. We also verify our inferred sibling relationships with the information acquired from the WHOIS lookup service. More than half of our inferred sibling-to-sibling relationships are confirmed by the WHOIS lookup service. To the best of our knowledge, there has been no publicly available information about AS relationships and this is the first attempt in understanding and inferring AS relationships in the Internet. We show evidence that some routing table entries stem from router misconfigurations.

Power-aware localized routing in wireless networks

Abstract: A cost aware metric for wireless networks based on remaining battery power at nodes was proposed for shortest-cost routing algorithms, assuming constant transmission power. Power-aware metrics, where transmission power depends on distance between nodes and corresponding shortest power algorithms were also proposed. We define a power-cost metric based on the combination of both node's lifetime and distance-based power metrics. We investigate some properties of power adjusted transmissions and show that, if additional nodes can be placed at desired locations between two nodes at distance d, the transmission power can be made linear in d as opposed to d/sup /spl alpha// dependence for /spl alpha/ /spl ges/ 2. This provides basis for power, cost, and power-cost localized routing algorithms where nodes make routing decisions solely on the basis, of location of their neighbors and destination. The power-aware routing algorithm attempts to minimize the total power needed to route a message between a source and a destination. The cost-aware routing algorithm is aimed at extending the battery's worst-case lifetime at each node. The combined power-cost localized routing algorithm attempts to minimize the total power needed and to avoid nodes with a short battery's remaining lifetime. We prove that the proposed localized power, cost, and power-cost efficient routing algorithms are loop-free and show their efficiency by experiments.

Delayed Internet routing convergence

Abstract: This paper examines the latency in Internet path failure, failover, and repair due to the convergence properties of interdomain routing. Unlike circuit-switched paths which exhibit failover on the order of milliseconds, our experimental measurements show that interdomain routers in the packet-switched Internet may take tens of minutes to reach a consistent view of the network topology after a fault. These delays stem from temporary routing table fluctuations formed during the operation of the border gateway protocol (BGP) path selection process on the Internet backbone routers. During these periods of delayed convergence, we show that end-to-end Internet paths will experience intermittent loss of connectivity, as well as increased packet loss and latency. We present a two-year study of Internet routing convergence through the experimental instrumentation of key portions of the Internet infrastructure, including both passive data collection and fault-injection machines at major Internet exchange points. Based on data from the injection and measurement of several hundred thousand interdomain routing faults, we describe several unexpected properties of convergence and show that the measured upper bound on Internet interdomain routing convergence delay is an order of magnitude slower than previously thought. Our analysis also shows that the upper theoretic computational bound on the number of router states and control messages exchanged during the process of BGP convergence is factorial with respect to the number of autonomous systems in the Internet. Finally, we demonstrate that much of the observed convergence delay stems from specific router vendor implementation decisions and ambiguity in the BGP specification.

The performance of query control schemes for the zone routing protocol

Abstract: In this paper, we study the performance of route query control mechanisms for the Zone Routing Protocol (ZRP) for ad hoc networks. ZRP proactively maintains routing information for a local neighborhood (routing zone), while reactively acquiring routes to destinations beyond the routing zone. This hybrid routing approach can be more efficient than traditional routing schemes. However, without proper query control techniques, the ZRP cannot provide the expected reduction in the control traffic.Our proposed query control schemes exploit the structure of the routing zone to provide enhanced detection and prevention of overlapping queries. These techniques can be applied to single- or multiple-channel ad hoc networks to improve both the delay and control traffic performance of ZRP. Our query control mechanisms allow ZRP to provide routes to all accessible network nodes, with less control traffic than purely proactive link state or purely reactive route discovery, and with less delay than conventional flood searching.

Compact routing schemes

Abstract: We describe several compact routing schemes for general weighted undirected networks. Our schemes are simple and easy to implement. The routing tables stored at the nodes of the network are all very small. The headers attached to the routed messages, including the name of the destination, are extremely short. The routing decision at each node takes constant time. Yet, the stretch of these routing schemes, i.e., the worst ratio between the cost of the path on which a packet is routed and the cost of the cheapest path from source to destination, is a small constant. Our schemes achieve a near-optimal tradeoff between the size of the routing tables used and the resulting stretch. More specifically, we obtain: A routing scheme that uses only O (n 1/2) bits of memory at each node of an n-node network that has stretch 3. The space is optimal, up to logarithmic factors, in the sense that every routing scheme with stretch n2), and every routing scheme with stretch n3/2). The headers used are only (1 + O(1)) log2> n-bits long and each routing decision takes constant time. A variant of this scheme with [log2 n] -bit headers makes routing decisions in O(log log n) time. Also, for every integer k > 2, a general handshaking based routing scheme that uses O (n1/k) bits of memory at each node that has stretch 2k - 1. A conjecture of Erdos from 1963, settled for k = 3, 5, implies that the routing tables are of near-optimal size relative to the stretch. The handshaking is similar in spirit to a DNS lookup in TCP/IP. Headers are O(log2 n) bits long and each routing decision takes constant time. Without handshaking, the stretch of the scheme increases to 4k - 5. One ingredient used to obtain the routing schemes mentioned above, may be of independent practical and theoretical interest: A shortest path routing scheme for trees of arbitrary degree and diameter that assigns each vertex of an n-node tree a (1 + O(1)) log2 n-bit label. Given the label of a source node and the label of a destination it is possible to compute, in constant time, the port number of the edge from the source that heads in the direction of the destination. The general scheme for k > 2 also uses a clustering technique introduced recently by the authors. The clusters obtained using this technique induce a sparse and low stretch tree cover of the network. This essentially reduces routing in general networks into routing problems in trees that could be solved using the above technique.

Issues for routing in the optical layer

Abstract: Optical layer control planes based on MPLS and other Internet protocols hold great promise because of their proven scalability, ability to support rapid provisioning, and auto discovery and self-inventory capabilities and are under intense study in various standards bodies. To date however little attention has been paid to aspects of the optical layer which differ from those found in data networking. We study three such aspects which impact routing: network elements which are reconfigurable, but in constrained ways; transmission impairments which may make some routes unusable; and diversity. We conclude that if emerging optical technology is to be maximally exploited, heterogeneous technologies with dissimilar routing constraints are likely. Four alternative architectures for dealing with this eventuality are identified and some trade-offs between centralizing or distributing some aspects of routing are discussed.

Wireless packet switched communication systems and networks using adaptively steered antenna arrays

Abstract: Methods, apparatuses and systems are provided for use in a wireless routing network. One apparatus, for example, includes an adaptive antenna that is configurable to receive a transmission signal from a transmitter and in response transmit corresponding outgoing multi-beam electromagnetic signals exhibiting a plurality of selectively placed transmission peaks and transmission nulls within a far field region of a coverage area. The adaptive antenna may also be configured to selectively receive at least one incoming electromagnetic signal directed through the coverage area. The adaptive antenna includes at least one antenna array and logic. The antenna array has a plurality of antenna elements. The logic is operatively coupled to the antenna array and configured to selectively control the placement of the transmission peaks and transmission nulls within the outgoing multi-beam electromagnetic signals. The logic may also be configured to selectively control the reception of at least one incoming electromagnetic signal. The logic is configured to be responsive to routing information. Such routing information may be dynamically maintained in one or more routing tables.

Geographical routing using partial information for wireless ad hoc networks

Abstract: We present an algorithm for routing in wireless ad hoc networks using information about the geographical location of the nodes. We assume each node knows its geographical position and the position of the node to which it wants to send a packet. Initially, the nodes know only their neighbors. But over time they discover other nodes in the network. The routing table at a node S is a list , where p/sub i/ is a geographical position and S/sub i/ is a neighbor of node S. When node S receives a packet for a node D at position pos(D), it finds the p/sub i/ in its routing table which is closest to pos(D) and forwards the packet to the neighbor S/sub i/. We prove the correctness of the algorithm and show that our algorithm naturally aggregates the nodes so that the routing tables remain small. We show that the mean routing table size is O(L~logn), where L~ is the average number of hops between two nodes and n is the number of nodes in the network. We also present methods for taking positional errors, node failures and mobility into account. We justify the results through simulation.

Network access system including a programmable access device having distributed service control

Abstract: A distributed network access system (30) in accordance with the present invention includes at least an external processor (42) and a programmable access device (40). The programmable access device has a message interface coupled to the external processor and first and second network interfaces through which packets are communicated with a network. The programmable access device includes a packet header filter and a forwarding table (50) that is utilized to route packets communicated between the first and second network interfaces. In response to receipt of a series of packets, the packet header filter in the programmable access device identifies messages in the series of messages upon which policy-based services are to be implemented and passes identified messages via the message interface to the external processor for processing. In response to receipt of a message, the external processor invokes service control on the message and may also invoke policy control (48) on the message.

Differential destination multicast-a MANET multicast routing protocol for small groups

Abstract: In this paper we propose a multicast routing protocol for mobile ad hoc networks (MANETs). The protocol-termed differential destination mmulticast (DDM)-differs from common approaches proposed for MANET multicast routing in two ways. Firstly, instead of distributing membership control throughout the network, DDM concentrates this authority at the data sources (i.e. senders) thereby giving sources knowledge of group membership. Secondly, differentially-encoded, variable-length destination headers are inserted in data packets which are used in combination with unicast routing tables to forward multicast packets towards multicast receivers. Instead of requiring that multicast forwarding state to be stored in all participating nodes, this approach also provides the option of stateless multicasting. Each node independently has the choice of caching forwarding state or having its upstream neighbor to insert this state into self-routed data packets, or some combination thereof. The protocol is best suited for use with small multicast groups operating in dynamic networks of any size.

High-performance addressing and routing of data packets with semantically descriptive labels in a computer network

Abstract: A method, system and apparatus for routing data through a network based on the content or semantics of data. Semantic routing engines route the data through the network based upon information maintained in routing tables. The routing tables used to route the content through the network are derived by aggregating information about either content consumers or content producers into ontological trees.

The impact of Internet policy and topology on delayed routing convergence

Abstract: This paper examines the role inter-domain topology and routing policy play in the process of delayed Internet routing convergence. In previous work, we showed that the Internet lacks effective inter-domain path fail-over. Unlike circuit-switched networks which exhibit fail-over on the order of milliseconds, we found Internet backbone routers may take tens of minutes to reach a consistent view of the network topology after a fault. In this paper, we expand an our earlier work by exploring the impact of specific Internet provider policies and topologies on the speed of routing convergence. Based on data from the experimental injection and measurement of several hundred thousand inter-domain routing faults, we show that the time for end-to-end Internet convergence depends on the length of the longest possible backup autonomous system path between a source and destination node. We also demonstrate significant variation in the convergence behavior of Internet service providers, with the larger providers exhibiting the fastest convergence latencies. Finally, we discuss possible modifications to BGP and provider routing policies which if deployed, would improve inter-domain routing convergence.

Multipath routing in the presence of frequent topological changes

Abstract: In this article we propose a framework for multipath routing in mobile ad hoc networks and provide its analytical evaluation. The instability of the topology (e.g., failure of links) in these types of networks, due to nodal mobility and changes in wireless propagation conditions, makes transmission of time-sensitive information a challenging problem. To combat this inherent unreliability of these networks, we propose a routing scheme that uses multiple paths simultaneously by splitting the information among the multitude of paths, to increase the probability that the essential portion of the information is received at the destination without incurring excessive delay. Our scheme works by adding some overhead to each packet, which is calculated as a linear function of the original packet bits. The resulting packet (information and overhead) is fragmented into smaller blocks and distributed over the available paths. Our goal is, given the failure probabilities of the paths, to find the optimal way to fragment and then distribute the blocks to the paths so that the probability of reconstructing the original information at the destination is maximized. Our algorithm has low time complexity, which is crucial since the path failure characteristics vary with time and the optimal block distribution has to be recalculated in real time.

Internet traffic engineering without full mesh overlaying

Abstract: The overlay approach has been widely used by many service providers for traffic engineering in large Internet backbones. In the overlay approach, logical connections are set up between edge nodes to form a full mesh virtual network on top of the physical topology. IP routing is then run over the virtual network. Traffic engineering objectives are achieved through carefully routing logical connections over the physical links. Although the overlay approach has been implemented in many operational networks, it has a number of well-known scaling issues. This paper proposes a new approach, which we call the integrated approach, to achieve traffic engineering without full-mesh overlaying. In the integrated approach, IP routing runs natively over the physical topology rather than over the virtual network. Traffic engineering objectives are realized by setting appropriate link metrics in IP routing protocols. We first illustrate our approach with a simple network, then present a formal analysis of the integrated approach and a method for deriving the appropriate link weights. Our analysis shows that for any given set of optimal routes of the overlay approach with respect to a set of traffic demands, the integrated approach can achieve exactly the same result by reproducing them as shortest paths. We further extend the result to a more generic one: for any arbitrary set of routes, as long as they are not loopy, they can be converted to shortest-paths with respect to some set of positive link weights. A theoretical insight of our result is that the optimal routing (with respect to any objective function) is always shortest path routing with respect to some appropriate positive link weights.

Data plane restart without state change in a control plane of an intermediate network node

Abstract: A system and technique restarts a data plane of an intermediate node, such as an aggregation router, of a computer network without changing the state of a control plane in the router. The aggregation router comprises a control plane that includes a supervisor processor configured to manage traffic forwarding operations of the node. To that end, the supervisor processor maintains a current state of the control plane pertaining to, e.g., routing protocols and interface states of line cards within the router. The aggregation router further comprises a data plane that includes hardware components, such as a forwarding engine, configured to perform forwarding operations for data forwarded by the router.

The impact of routing policy on Internet paths

Abstract: The impact of routing policy on Internet paths is poorly understood. In theory, the policy can inflate shortest-router-hop paths. To our knowledge, the extent of this inflation has not been previously examined. Using a simplified model of the routing policy in the Internet, we obtain approximate indications of the impact of policy routing on Internet paths. Our findings suggest that the routing policy does impact the length of Internet paths significantly. For instance, in our model of the routing policy, some 20% of Internet paths are inflated by more than five router-level hops.

Routing in Trees

Abstract: This article focuses on routing messages along shortest paths in tree networks, using compact distributed data structures. We mainly prove that n-node trees support routing schemes with message headers, node addresses, and local memory space of size O(log n) bits, and such that every local routing decision is taken in constant time. This improves the best known routing scheme by a factor of O(log n) in term of both memory requirements and routing time. Our routing scheme requires headers and addresses of size slightly larger than log n, motivated by an inherent trade-off between address-size and memory space, i.e., any routing scheme with addresses on log n bits requires Ω(√n) bits of local memory-space. This shows that a little variation of the address size, e.g., by an additive O(log n) bits factor, has a significant impact on the local memory space.

Integrated dynamic IP and wavelength routing in IP over WDM networks

Abstract: This paper develops an algorithm for integrated dynamic routing of bandwidth guaranteed paths in IP over WDM networks. By integrated routing, we mean routing taking into account the combined topology and resource usage information at the IP and optical layers. Typically, routing in IP over WDM networks has been separated into routing at the IP layer taking only IP layer information into account, and wavelength routing at the optical layer taking only optical network information into account. The motivation for integrated routing is the potential for better network usage, and this is a topic which has not been been studied extensively. We develop an integrated routing algorithm that determines (1) whether to route an arriving request over the existing topology or whether it is better to open new wavelength paths. Sometimes it is better to open new wavelength paths even if it feasible to route the current demand over the existing IP topology due to previously set-up wavelength paths. 2) For routing over the existing IP-level topology, compute "good" routes. (3) If new wavelength paths are to be set-up, determine the routers amongst which new wavelength paths are to be set-up and compute "good" routes for these new wavelength paths. The performance objective is the accomodation of as many requests as possible without requiring any a priori knowledge regarding future arrivals. The route computations account for the presence or absence of wavelength conversion capabilities at optical crossconnects. We show that the developed scheme performs very well in terms of performance metrics such as the number of rejected demands.

Network routing using link failure information

Abstract: Link failure messages are sent through a network to accelerate convergence of routing information after a network fault. The link failure messages reduce the oscillations in routing information stored by routers, which otherwise can cause significant problems, including intermittent loss of network connectivity as well as increased packet loss and latency. For example, the link failure messages reduce the time that a network using a path vector routing protocol, such as the Border Gateway Protocol (BGP), takes to converge to a stable state. More particularly, upon detecting a network fault, a router generates link failure information to identify the specific link that has failed. In some types of systems, the router communicates the link failure information to neighboring routers as well as a conventional update message withdrawing any unavailable routes. Once other routers receive the link failure information, the routers do not attempt to use routes that include the failed link.

Load-balancing routing for wireless access networks

Abstract: The widespread use of wireless devices presents new challenges for network operators, who need to provide service to ever larger numbers of mobile end users, while ensuring quality-of-service guarantees. We describe a new distributed routing algorithm that performs dynamic load-balancing for wireless access networks. The algorithm constructs a load-balanced backbone tree, which simplifies routing and avoids per-destination state for routing and per-flow state for QoS reservations. We evaluate the performance of the algorithm using several metrics including adaptation to mobility, degree of load-balance, bandwidth blocking rate, and convergence speed. We find that the algorithm achieves better network utilization by lowering bandwidth blocking rates than other methods.

Policy-based forwarding in open shortest path first (ospf) networks

Abstract: Policy-based traffic forwarding in a data network is implemented using policy-based control over propagation of LSA messages through the data network. A route tag is asserted in respect of a link state advertisement (LSA) message advertising a network address. Propagation of the LSA through the data network is controlled using the asserted internal route tag. At each hop, a policy decision affecting the forwarding of the LSA is made. Exemplary policy decisions include, Pass and Discard. In addition, the forwarding table may be updated using the route and address information contained in the LSA. In this case, routes entered in the forwarding table may be tagged as an inclusion route or an exclusion route. This may be based on the value of an exclusion route flag, such as a binary "0" or "1" inserted into an unused portion of the options field of the LSA.

Evaluating the impact of stale link state on quality-of-service routing

Abstract: Quality-of-service (QoS) routing satisfies application performance requirements and optimizes network resource usage by selecting paths based on connection traffic parameters and link load information. However, distributing link state imposes significant bandwidth and processing overhead on the network. This paper investigates the performance tradeoff between protocol overhead and the quality of the routing decisions in the context of the source-directed link state routing protocols proposed for IP and ATM networks. We construct a detailed model of QoS routing that parameterizes the path-selection algorithm, link-cost function, and link state update policy. Through extensive simulation experiments with several network topologies and traffic patterns, we uncover the effects of stale link state information and random fluctuations in traffic load on the routing and setup overheads. We then investigate how inaccuracy of link state information interacts with the size and connectivity of the underlying topology. Finally, we show that tuning the coarseness of the link-cost metric to the inaccuracy of underlying link state information reduces the computational complexity of the path-selection algorithm without significantly degrading performance. This work confirms and extends earlier studies, and offers new insights for designing efficient quality-of-service routing policies in large networks.

Inherently safe backup routing with BGP

Abstract: The Internet consists of a large number of autonomous systems (ASes) that exchange routing information using the border gateway protocol (BGP). Each AS applies local policies for selecting routes and propagating routes to others, with important implications for the reliability and stability of the global system. In and of itself, BGP does not ensure that every pair of hosts can communicate. In addition, routing policies are not guaranteed be safe, and may cause protocol divergence. Backup routing is often used to increase the reliability of the network under link and router failures, at the possible expense of safety. This paper presents a general model for backup routing that increases network reliability while allowing each AS to apply local routing policies that are consistent with the commercial relationships it has with its neighbors. In addition, our model is inherently safe in the sense that the global system remains safe under any combination of link and router failures. Our model and the proof of inherent safety are cast in terms of the stable paths problem, a static formalism that captures the semantics of interdomain routing policies. Then, we describe how to realize our model in BGP with locally-implementable routing policies. To simplify the specification of local policies, we propose a new BGP attribute that conveys the avoidance level of a route. We also describe how to realize these policies without modification to BGP by using the BGP community attribute.

MDVA: a distance-vector multipath routing protocol

Abstract: Routing protocols using the distributed Bellman-Ford (DBF) algorithm converge very slowly to the correct routes when link costs increase, and in the case when a set of link failures results in a network partition, DBF simply fails to converge, a problem which is commonly referred to as the count-to-infinity problem. We present the first distance-vector routing algorithm, MDVA, that uses a set of loop-free invariants to prevent the count-to-infinity problem. MDVA, in addition, computes multipaths that are loop-free at every instant. In our earlier work we shows how such loop-free multipaths can be used in traffic load-balancing and minimizing delays, which otherwise are impossible to perform in current single-path routing algorithms.

Routing packets across multiple forwarding elements

Abstract: A modularized routing system includes a control element and forwarding elements, all of which are connected via a private network, for example, an Ethernet. The control element computes a routing table for each of the forwarding elements. Based on information in the routing table, a forwarding element decrements a time-to-live counter in the packet header only if the forwarding element is the first one in the routing system encountered by the packet. Accordingly, the forwarding elements preserve the behavior of a single router while using substantially the same routing protocols as the single router.

An adaptive distance vector routing algorithm for mobile, ad hoc networks

Abstract: We present a new routing algorithm called adaptive distance vector (ADV) for mobile, ad hoc networks (MANETs). ADV is a distance vector routing algorithm that exhibits some on-demand characteristics by varying the frequency and the size of the routing updates in response to the network load and mobility conditions. Using simulations we show that ADV outperforms AODV and DSR especially in high mobility cases by giving significantly higher (50% or more) peak throughputs and lower packet delays. Furthermore, ADV uses fewer routing and control overhead packets than that of AODV and DSR, especially at moderate to high loads. Our results indicate the benefits of combining both proactive and on-demand routing techniques in designing suitable routing protocols for MANETs.

Scalable high-speed prefix matching

Abstract: Finding the longest matching prefix from a database of keywords is an old problem with a number of applications, ranging from dictionary searches to advanced memory management to computational geometry. But perhaps today's most frequent best matching prefix lookups occur in the Internet, when forwarding packets from router to router. Internet traffic volume and link speeds are rapidly increasing; at the same time, a growing user population is increasing the size of routing tables against which packets must be matched. Both factors make router prefix matching extremely performance critical.In this paper, we introduce a taxonomy for prefix matching technologies, which we use as a basis for describing, categorizing, and comparing existing approaches. We then present in detail a fast scheme using binary search over hash tables, which is especially suited for matching long addresses, such as the 128 bit addresses proposed for use in the next generation Internet Protocol, IPv6. We also present optimizations that exploit the structure of existing databases to further improve access time and reduce storage space.