Topic
Sandwich-structured composite
About: Sandwich-structured composite is a research topic. Over the lifetime, 5853 publications have been published within this topic receiving 101126 citations.
Papers published on a yearly basis
Papers
More filters
TL;DR: In this article, a three-dimensional elasticity analysis of sandwich panels with a functionally graded core subjected to transverse loading is performed, where the Young's modulus of the core is assumed to vary exponentially through the thickness.
181 citations
TL;DR: In this article, a thorough stress analysis and applying appropriate failure criteria in critical regions of the beam is performed to predict tensile or compressive failure of the facesheets, debonding at the core/facesheet interface, indentation failure under localized loading, core failure, wrinkling of the compression facesheet, and global buckling.
Abstract: The overall performance of sandwich structures depends in general on the properties of the facesheets, the core, the adhesive bonding the core to the skins, as well as geometrical dimensions. Sandwich beams under general bending, shear and in-plane loading display various failure modes. Their initiation, propagation and interaction depend on the constituent material properties, geometry, and type of loading. Failure modes and their initiation can be predicted by conducting a thorough stress analysis and applying appropriate failure criteria in the critical regions of the beam. This analysis is difficult because of the nonlinear and inelastic behavior of the constituent materials and the complex interactions of failure modes. Possible failure modes include tensile or compressive failure of the facesheets, debonding at the core/facesheet interface, indentation failure under localized loading, core failure, wrinkling of the compression facesheet, and global buckling.
180 citations
TL;DR: In this article, the analysis of static and low-velocity impact response of two typologies of aluminium honeycomb sandwich structures with different cell sizes was performed, and the failure mode and damage of the honeycomb panels were investigated using the 3D Computed Tomography.
177 citations
TL;DR: In this article, the authors describe the manufacturing and testing of graded conventional/auxetic honeycomb cores, which are used to manufacture sandwich panels for flatwise compression and edgewise loading.
Abstract: The work describes the manufacturing and testing of graded conventional/auxetic honeycomb cores. The graded honeycombs are manufactured using Kevlar woven fabric/914 epoxy prepreg using Kirigami techniques, which consist in a combination of Origami and ply-cut processes. The cores are used to manufacture sandwich panels for flatwise compression and edgewise loading. The compressive modulus and compressive strength of stabilized (sandwich) honeycombs are found to be higher than those of bare honeycombs, and with density-averaged properties enhanced compared to other sandwich panels offered in the market place. The modulus and strength of graded sandwich panel under quasi-static edgewise loading vary with different failure mode mechanisms, and offer also improvements towards available panels from open literature. Edgewise impact loading shows a strong directionality of the mechanical response. When the indenter impacts the auxetic portion of the graded core, the strong localization of the damage due to the negative Poisson’s ratio effect contains significantly the maximum dynamic displacement of the sandwich panel.
176 citations
TL;DR: In this paper, the truss cores are made by deformation shaping hexagonal perforated metal sheets and then bonded between thin facesheets using a transient liquid phase approach.
Abstract: Closed cell honeycomb core structures are widely used for sandwich panel construction. Periodic open cell tetrahedral truss core structures have recently been shown to possess weight specific properties that compete with those of honeycomb core designs. In contrast to honeycomb, the open cell topologies provide many opportunities for multifunctionality. Past approaches to miniature tetrahedral truss fabrication from metals have utilized investment casting routes. Material choices are then constrained by the need for high fluidity during casting. Strength knockdown due to casting defects has been observed. Here, we utilize a comparatively simple wrought metal based approach. The truss cores are made by deformation shaping hexagonal perforated metal sheets. They are then bonded between thin facesheets using a transient liquid phase approach. When designed to minimize bending of members within the core, a linear dependence of core modulus and strength upon relative density is anticipated. Core relative densities of less than two percent have been obtained. With this approach, low cost truss core structures can be made from a wide variety of heat-treatable wrought alloys. (Abstract Copyright [2002], Wiley Periodicals, Inc.)
176 citations