Self-reconfiguring modular robot

About: Self-reconfiguring modular robot is a research topic. Over the lifetime, 1601 publications have been published within this topic receiving 28551 citations. The topic is also known as: modular robots & modular self-reconfiguring robotic systems.

Modular Self-Reconfigurable Robot Systems [Grand Challenges of Robotics]

Abstract: The field of modular self-reconfigurable robotic systems addresses the design, fabrication, motion planning, and control of autonomous kinematic machines with variable morphology. Modular self-reconfigurable systems have the promise of making significant technological advances to the field of robotics in general. Their promise of high versatility, high value, and high robustness may lead to a radical change in automation. Currently, a number of researchers have been addressing many of the challenges. While some progress has been made, it is clear that many challenges still exist. By illustrating several of the outstanding issues as grand challenges that have been collaboratively written by a large number of researchers in this field, this article has shown several of the key directions for the future of this growing field

PolyBot: a modular reconfigurable robot

Abstract: Modular, self-reconfigurable robots show the promise of great versatility, robustness and low cost. The paper presents examples and issues in realizing those promises. PolyBot is a modular, self-reconfigurable system that is being used to explore the hardware reality of a robot with a large number of interchangeable modules. PolyBot has demonstrated the versatility promise, by implementing locomotion over a variety of terrain and manipulation versatility with a variety of objects. PolyBot is the first robot to demonstrate sequentially two topologically distinct locomotion modes by self-reconfiguration. PolyBot has raised issues regarding software scalability and hardware dependency and as the design evolves the issues of low cost and robustness will be resolved while exploring the potential of modular, self-reconfigurable robots.

M-TRAN: self-reconfigurable modular robotic system

Abstract: In this paper, a novel robotic system called modular transformer (M-TRAN) is proposed. M-TRAN is a distributed, self-reconfigurable system composed of homogeneous robotic modules. The system can change its configuration by changing each module's position and connection. Each module is equipped with an onboard microprocessor, actuators, intermodule communication/power transmission devices and intermodule connection mechanisms. The special design of M-TRAN module realizes both reliable and quick self-reconfiguration and versatile robotic motion. For instance, M-TRAN is able to metamorphose into robotic configurations such as a legged machine and hereby generate coordinated walking motion without any human intervention. An actual system with ten modules was built and basic operations of self-reconfiguration and motion generation were examined through experiments. A series of software programs has also been developed to drive M-TRAN hardware, including a simulator of M-TRAN kinematics, a user interface to design appropriate configurations and motion sequences for given tasks, and an automatic motion planner for a regular cluster of M-TRAN modules. These software programs are integrated into the M-TRAN system supervised by a host computer. Several demonstrations have proven its capability as a self-reconfigurable robot.

Modular Self-Reconfigurable Robot Systems

Abstract: The field of modular self-reconfigurable robotic systems addresses the design, fabrication, motion planning, and control of autonomous kinematic machines with variable morphology. Modular self-reconfigurable systems have the promise of making significant technological advances to the field of robotics in general. Their promise of high versatility, high value, and high robustness may lead to a radical change in automation. Currently, a number of researchers have been addressing many of the challenges. While some progress has been made, it is clear that many challenges still exist. By illustrating several of the outstanding issues as grand challenges that have been collaboratively written by a large number of researchers in this field, this article has shown several of the key directions for the future of this growing field

A cargo-sorting DNA robot.

Abstract: INTRODUCTION Since the 1980s, the design and synthesis of molecular machines has been identified as a grand challenge for molecular engineering. Robots are an important type of molecular machine that automatically carry out complex nanomechanical tasks. DNA molecules are excellent materials for building molecular robots, because their geometric, thermodynamic, and kinetic properties are well understood and highly programmable. So far, the development of DNA robots has been limited to simple functions. Most DNA robots were designed to perform a single function: walking in a controlled direction. A few demonstrations included a second function combined with walking (for example, picking up nanoparticles or choosing a path at a junction). However, these relatively more complex functions were also more difficult to control, and the complexity of the tasks was limited to what the robot can perform within 3 to 12 steps. In addition, each robot design was tailored for a specific task, complicating efforts to develop new robots that perform new tasks by combining functions and mechanisms. RATIONALE The design and synthesis of molecular robots presents two critical challenges, those of modularity and algorithm simplicity, which have been transformative in other areas of molecular engineering. For example, simple and modular building blocks have been used for scaling up molecular information processing with DNA circuits. As in DNA circuits, simple building blocks for DNA robots could enable more complex nanomechanical tasks, whereas modularity could allow diverse new functions performed by robots using the same set of building blocks. RESULTS We demonstrate a DNA robot that performs a nanomechanical task substantially more sophisticated than previous work. We developed a simple algorithm and three modular building blocks for a DNA robot that performs autonomous cargo sorting. The robot explores a two-dimensional testing ground on the surface of DNA origami, picks up multiple cargos of two types that are initially at unordered locations, and delivers each type to a specified destination until all cargo molecules are sorted into two distinct piles. The robot is designed to perform a random walk without any energy supply. Exploiting this feature, a single robot can repeatedly sort multiple cargos. Localization on DNA origami allows for distinct cargo-sorting tasks to take place simultaneously in one test tube or for multiple robots to collectively perform the same task. On average, our robot performed approximately 300 steps while sorting the cargos. The number of steps is one to two magnitudes larger than the previously demonstrated DNA robots performing additional tasks while walking. Using exactly the same robot design, the system could be generalized to multiple types of cargos with arbitrary initial distributions, and to many instances of distinct tasks in parallel, whereas each task can be assigned a distinct number of robots depending on the difficulty of the task. CONCLUSION Using aptamers, antibodies, or direct conjugation, small chemicals, metal nanoparticles, and proteins could be transported as cargo molecules so that the cargo-sorting DNA robots could have potential applications in autonomous chemical synthesis, in manufacturing responsive molecular devices, and in programmable therapeutics. The building blocks developed in this work could also be used for diverse functions other than cargo sorting. For example, inspired by ant foraging, adding a new building block for leaving pheromone-like signals on a path, DNA robots could be programmed to find the shortest path and efficiently transport cargo molecules. With simple communication between the robots, they could perform even more sophisticated tasks. With more effort in developing modular and collective molecular robots, and with simple and systematic approaches, molecular robots could eventually be easily programmed like macroscopic robots, but working in microscopic environments.