Sensor array

About: Sensor array is a research topic. Over the lifetime, 16925 publications have been published within this topic receiving 342481 citations.

High-resolution frequency-wavenumber spectrum analysis

Abstract: The output of an array of sansors is considered to be a homogeneous random field. In this case there is a spectral representation for this field, similar to that for stationary random processes, which consists of a superposition of traveling waves. The frequency-wavenumber power spectral density provides the mean-square value for the amplitudes of these waves and is of considerable importance in the analysis of propagating waves by means of an array of sensors. The conventional method of frequency-wavenumber power spectral density estimation uses a fixed-wavenumber window and its resolution is determined essentially by the beam pattern of the array of sensors. A high-resolution method of estimation is introduced which employs a wavenumber window whose shape changes and is a function of the wavenumber at which an estimate is obtained. It is shown that the wavenumber resolution of this method is considerably better than that of the conventional method. Application of these results is given to seismic data obtained from the large aperture seismic array located in eastern Montana. In addition, the application of the high-resolution method to other areas, such as radar, sonar, and radio astronomy, is indicated.

Two decades of array signal processing research: the parametric approach

Abstract: The quintessential goal of sensor array signal processing is the estimation of parameters by fusing temporal and spatial information, captured via sampling a wavefield with a set of judiciously placed antenna sensors. The wavefield is assumed to be generated by a finite number of emitters, and contains information about signal parameters characterizing the emitters. A review of the area of array processing is given. The focus is on parameter estimation methods, and many relevant problems are only briefly mentioned. We emphasize the relatively more recent subspace-based methods in relation to beamforming. The article consists of background material and of the basic problem formulation. Then we introduce spectral-based algorithmic solutions to the signal parameter estimation problem. We contrast these suboptimal solutions to parametric methods. Techniques derived from maximum likelihood principles as well as geometric arguments are covered. Later, a number of more specialized research topics are briefly reviewed. Then, we look at a number of real-world problems for which sensor array processing methods have been applied. We also include an example with real experimental data involving closely spaced emitters and highly correlated signals, as well as a manufacturing application example.

Sensor networks: evolution, opportunities, and challenges

Abstract: Wireless microsensor networks have been identified as one of the most important technologies for the 21st century. This paper traces the history of research in sensor networks over the past three decades, including two important programs of the Defense Advanced Research Projects Agency (DARPA) spanning this period: the Distributed Sensor Networks (DSN) and the Sensor Information Technology (SensIT) programs. Technology trends that impact the development of sensor networks are reviewed, and new applications such as infrastructure security, habitat monitoring, and traffic control are presented. Technical challenges in sensor network development include network discovery, control and routing, collaborative signal and information processing, tasking and querying, and security. The paper concludes by presenting some recent research results in sensor network algorithms, including localized algorithms and directed diffusion, distributed tracking in wireless ad hoc networks, and distributed classification using local agents.

Fully integrated wearable sensor arrays for multiplexed in situ perspiration analysis

Abstract: Wearable sensor technologies are essential to the realization of personalized medicine through continuously monitoring an individual's state of health. Sampling human sweat, which is rich in physiological information, could enable non-invasive monitoring. Previously reported sweat-based and other non-invasive biosensors either can only monitor a single analyte at a time or lack on-site signal processing circuitry and sensor calibration mechanisms for accurate analysis of the physiological state. Given the complexity of sweat secretion, simultaneous and multiplexed screening of target biomarkers is critical and requires full system integration to ensure the accuracy of measurements. Here we present a mechanically flexible and fully integrated (that is, no external analysis is needed) sensor array for multiplexed in situ perspiration analysis, which simultaneously and selectively measures sweat metabolites (such as glucose and lactate) and electrolytes (such as sodium and potassium ions), as well as the skin temperature (to calibrate the response of the sensors). Our work bridges the technological gap between signal transduction, conditioning (amplification and filtering), processing and wireless transmission in wearable biosensors by merging plastic-based sensors that interface with the skin with silicon integrated circuits consolidated on a flexible circuit board for complex signal processing. This application could not have been realized using either of these technologies alone owing to their respective inherent limitations. The wearable system is used to measure the detailed sweat profile of human subjects engaged in prolonged indoor and outdoor physical activities, and to make a real-time assessment of the physiological state of the subjects. This platform enables a wide range of personalized diagnostic and physiological monitoring applications.

Blind beamforming for non-gaussian signals

Abstract: The paper considers an application of blind identification to beamforming. The key point is to use estimates of directional vectors rather than resort to their hypothesised value. By using estimates of the directional vectors obtained via blind identification, i.e. without knowing the array manifold, beamforming is made robust with respect to array deformations, distortion of the wave front, pointing errors etc., so that neither array calibration nor physical modelling is necessary. Rather suprisingly, ‘blind beamformers’ may outperform ‘informed beamformers’ in a plausible range of parameters, even when the array is perfectly known to the informed beamformer. The key assumption on which blind identification relies is the statistical independence of the sources, which is exploited using fourth-order cumulants. A computationally efficient technique is presented for the blind estimation of directional vectors, based on joint diagonalisation of fourth-order cumulant matrices; its implementation is described, and its performance is investigated by numerical experiments.