Topic
Shielded metal arc welding
About: Shielded metal arc welding is a research topic. Over the lifetime, 4462 publications have been published within this topic receiving 40560 citations. The topic is also known as: manual metal arc welding & flux shielded arc welding.
Papers published on a yearly basis
Papers
More filters
••
TL;DR: In this paper, the authors compared the environmental performance of metal arc welding technologies, including gas tungsten arc welding (GTAW), submerged arc welding, and flux-cored arc welding.
Abstract: The paper aims to analyze and compare the environmental performances of metal arc welding technologies: gas metal arc welding (GMAW), shielded metal arc welding (SMAW), gas tungsten arc welding (GTAW), submerged arc welding (SAW), and flux-cored arc welding (FCAW). Welding is considered one of the most energy-intensive processes in manufacturing. This study was performed in accordance with the international standard ISO 14040/14044 by using attributional life cycle assessment (aLCA). The functional unit is defined as the “the development of 1 metre of welding seam (qualified by ASME section IX requirements) to join 25 millimetres thick of metal plates made in carbon steel material and considering a V-bevel configuration.” Different configurations of base/filler materials and standardized bevel geometries have been analyzed as welding scenarios. The inventory considers all inputs (e.g., electric energy and filler material) and outputs (e.g., fume emissions and slags) involved in each welding process. A framework for data collection starting from available project documentation is presented as an innovative solution for the inventory phase. The impact assessment includes the human health, resources (midpoints/endpoint), and ecosystems (endpoint) categories from the ReCiPe (H) and cumulative energy demand (CED) methods. This study reveals a notable dominance in terms of the environmental burdens of GTAW and SMAW processes, as they present higher impacts in most of the impact categories. SMAW is the most energy-consuming process, and this aspect is reflected in the environmental performance. Conversely, GMAW presents the least environmental load, accounting for less than one third compared with GTAW in terms of the CED indicator and performing very well in terms of the ReCiPe endpoint indicator. Via analysis of different scenarios, the main outcomes are the following: (i) the use of V bevels significantly increases the environmental load when the metal plate thickness increases and (ii) the use of specific materials such as Inconel alloy exacerbates the environmental concerns associated with welding processes. The use of project documentation allows robust analysis of welding activity. Sensitivity analysis shows how the range of values for specific parameters (e.g., volts and amps) affects each technology in a different manner. Indeed, those ranges have a limited impact on the result accuracy (up to 20%) for more automatized welding processes (e.g., GMAW, SAW, and FCAW), in which only a small number of parameters are set by the operator, and the operator skills are less influential on the quality of the weld.
14 citations
••
TL;DR: In this paper, the results of an industry survey of weld repair practices are described and experimental evaluations performed on service-aged 21/4 Cr-1Mo steel piping using SMAW with both conventional postweld heat treatments and temper bead repair techniques.
Abstract: This article documents the results of an industry survey of weld repair practices and describes the results of experimental evaluations performed on service-aged 21/4 Cr-1Mo steel piping using SMAW with both conventional postweld heat treatments and temper bead repair techniques. The overall results of this program provide substantial evidence that service-aged piping systems can be successfully weld repaired with and without postweld heat treatments and that life extension by several decades is achievable under the right design and repair conditions. Weld repairs performed on degraded exservice welds resulted in restoration or improvement of tensile and creep properties. Microhardness test results within the heat-affected zone of each weldment indicated that the temper bead weld repairs produced only slightly higher peak hardness values than those measured for the fully postweld heat treated repairs. Finally, in terms of toughness, temper bead weld repairs consistently produced higher impact properties than those measured for the postweld heat treated weldments. Gas tungsten arc weld repairs with postweld heat treatment resulted in the best combination of tensile strength, uniform microhardness distribution across the weld, Charpy toughness, and creep rupture life.
14 citations
•
05 Dec 1985
TL;DR: In this article, the welding rod is introduced into the torch in such a way that it is located in the arc between the end of the non-consumable electrode and the workpiece and accordingly passes in an electroless dripping manner into the arc.
Abstract: The invention starts from the known WIG or plasma welding process using an inert gas, with weld (filler) material being supplied as a welding rod (wire). According to the invention, the welding rod is introduced into the torch in such a way that it is located in the arc between the end of the non-consumable electrode and the workpiece and accordingly passes in an electroless dripping manner into the arc. Accordingly, the torch is equipped with a welding rod feed, by means of which the rod can be introduced into the nozzle channel of the torch and accordingly into the arc.
14 citations