Topic
SISAL
About: SISAL is a research topic. Over the lifetime, 1878 publications have been published within this topic receiving 55528 citations.
Papers published on a yearly basis
Papers
More filters
TL;DR: In this article, the recycling behavior of PP/vegetal fiber composites was analyzed using microscopic, mechanical, rheological and thermal tests, and the results showed that mechanical properties are well conserved with reprocessing of PP and vegetal fibre composites.
215 citations
TL;DR: In this paper, a series of tensile tests were conducted on a Lloyd LRX tensile testing machine for numerous natural fibers deemed potential candidates for development in composite applications, including jute, kenaf, flax, abaca, sisal, hemp, and coir.
Abstract: A series of tensile tests were conducted on a Lloyd LRX tensile testing machine for numerous natural fibers deemed potential candidates for development in composite applications. The tensile tests were conducted on the fibers jute, kenaf, flax, abaca, sisal, hemp, and coir for samples exposed to moisture conditions of (1) room temperature and humidity, (2) 65% moisture content, (3) 90% moisture content, and (4) soaked fiber. These seven fibers were then tested for the four conditions and the mechanical properties of tensile strength, tensile strain to failure, and Young's modulus were calculated for the results. These results were then compared and verified with those from the literature, with some of the fibers showing distinctly promising potential. Additionally, a study on the effect of alkalization using 3% NaOH solution was carried out on flax, kenaf, abaca, and sisal to observe impact that this common fiber pre-treatment process has on fiber mechanical properties. The result of the investigation indicated that over treatment of natural fibers using NaOH could have a negative effect on the base fiber properties. It is consequently apparent that a treatment time of less than 10 min is sufficient to remove hemicelluloses and to give the optimum effect.
208 citations
TL;DR: In this paper, the performance of short randomly oriented banana and sisal hybrid fiber reinforced polyester composites was investigated with reference to the relative volume fraction of the two fibers at a constant total fiber loading of 0.40 Vf.
Abstract: The mechanical performance of short randomly oriented banana and sisal hybrid fiber reinforced polyester composites was investigated with reference to the relative volume fraction of the two fibers at a constant total fiber loading of 0.40 volume fraction (Vf), keeping banana as the skin material and sisal as the core material. A positive hybrid effect is observed in the flexural strength and flexural modulus of the hybrid composites. The tensile strength of the composites showed a positive hybrid effect when the relative volume fraction of the two fibers was varied, and maximum tensile strength was found to be in the hybrid composite having a ratio of banana and sisal 4 : 1. The impact strength of the composites was increased with increasing volume fraction of sisal. However, a negative hybrid effect is observed when the impact strength of the composites is considered. Keeping the relative volume fraction of the two fibers constant, that is, banana : sisal = 0.32 : 0.08 (i.e., 4 : 1), the fiber loading was optimized and different layering patterns were investigated. The impact strength of the composites was increased with fiber loading. Tensile and flexural properties were found to be better at 0.40 Vf. In the case of different layering patterns, the highest flexural strength was observed for the bilayer composites. Compared to other composites, the tensile properties were slightly higher for the composite having banana as the skin material and sisal as the core material. Scanning electron micrographs of the tensile and impact fracture surfaces of the hybrid composites having volume fraction 0.20 and 0.40 Vf were studied. The experimental tensile strength and tensile modulus of hybrid composites were compared with those of theoretical predictions. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 1699–1709, 2005
208 citations
TL;DR: In this paper, sisal fibers were mercerized, under tension and no tension, to improve their tensile properties and interfacial adhesion with soy protein resins, which is known to minimize fiber shrinkage and to lower the microfibrillar angle by aligning them along the fiber axis.
Abstract: Sisal fibers were mercerized, under tension and no tension, to improve their tensile properties and interfacial adhesion with soy protein resin. Mercerization of fibers under tension is known to minimize fiber shrinkage and to lower the microfibrillar angle by aligning them along the fiber axis. Mercerization improved the fracture stress and Young’s modulus of the sisal fibers while their fracture strain and toughness decreased. Mercerized sisal fiber-reinforced composites with soy protein resin showed improvement in both fracture stress and stiffness by 12.2% and 36.2%, respectively, compared to the unmercerized fiber-reinforced composites. Scanning electron microscope (SEM) photomicrographs of the composite fracture surfaces showed shorter fibrils protruding in the mercerized fiber-reinforced composites resulting in better sisal fiber/soy adhesion. Changed fiber surface properties were also responsible for better adhesion.
206 citations
TL;DR: In this paper, the surface of sisal fibers was modified by treatment with NaOH or N-isopropyl-acrylamide solutions, and the results showed that with the NaOH treatment the fiber becomes more thermally resistant.
200 citations