scispace - formally typeset
Search or ask a question
Topic

Soybean oil

About: Soybean oil is a research topic. Over the lifetime, 11154 publications have been published within this topic receiving 234952 citations. The topic is also known as: soya oil & soy bean oil.


Papers
More filters
Journal ArticleDOI
TL;DR: In this article, the authors investigated the effect of fat-supplemented diets on poults' bone mineral retention and found that fat-containing diets can lead to increased soap formation in young white male turkeys.

101 citations

Journal ArticleDOI
TL;DR: An HPLC-MSn system was used to quantify and identify the structures of individual sophorolipid components produced in Torulopsis bombicola fermentation on glucose with or without hexadecane or soybean oil.

101 citations

Journal ArticleDOI
TL;DR: In this paper, liquid vegetable oils (VO), including cottonseed, peanut, soybean, corn, and canola, were randomly interesterified with completely hydrogenated soybean or cottonseed hardstocks (vegetable oil trisaturate; VOTS) in ratios of four parts VO and one part VOTS.
Abstract: Liquid vegetable oils (VO), including cottonseed, peanut, soybean, corn, and canola, were randomly interesterified with completely hydrogenated soybean or cottonseed hardstocks (vegetable oil trisaturate; VOTS) in ratios of four parts VO and one part VOTS. Analysis of the reaction products by high-performance liquid chromatography showed that at 70°C and vigorous agitation, with 0.5% sodium methoxide catalyst, the reactions were complete after 15 min. Solid-fat index (SFI) measurements made at 50, 70, 80, 92, and 104°F, along with drop melting points, indicated that the interesterified fats possess plasticity curves in the range of commercial soft tub margarine oils prepared by blending hydrogenated stocks. Shortening basestocks were prepared by randomly interesterifying palm or soybean oil with VOTS in ratios of 1:1 or 3:1 or 4:1, respectively. Blending of the interesterified basestocks with additional liquid VO yielded products having SFI curves very similar to commercial all purpose-type shortening oils made by blending hydrogenated stocks. Other studies show that fluid-type shortening oils can be prepared through blending of interesterified basestocks with liquid VO. X-ray diffraction studies showed that the desirable β′ crystal structure is achieved through interesterification and blending.

101 citations

Journal ArticleDOI
TL;DR: In this paper, the potential of replacing up to 50% of the petroleum-based polyol in waterborne rigid polyurethane foam applications was evaluated by using 50 vegetable oil-derived polyols in terms of their hydroxyl number and their thermal conductivity, density and compressive strength.
Abstract: Fifty vegetable oil-based polyols were characterized in terms of their hydroxyl number and their potential of replacing up to 50% of the petroleum-based polyol in waterborne rigid polyurethane foam applications was evaluated. Polyurethane foams were prepared by reacting isocyanates with polyols containing 50% of vegetable oil-based polyols and 50% of petroleum-based polyol and their thermal conductivity, density, and compressive strength were determined. The vegetable oil-based polyols included epoxidized soybean oil reacted with acetol, commercial soybean oil polyols (soyoils), polyols derived from epoxidized soybean oil and diglycerides, etc. Most of the foams made with polyols containing 50% of vegetable oil-based polyols were inferior to foams made from 100% petroleum-based polyol. However, foams made with polyols containing 50% hydroxy soybean oil, epoxidized soybean oil reacted with acetol, and oxidized epoxidized diglyceride of soybean oil not only had superior thermal conductivity, but also better density and compressive strength properties than had foams made from 100% petroleum polyol. Although the epoxidized soybean oil did not have any hydroxyl functional group to react with isocyanate, when used in 50 : 50 blend with the petroleum-based polyol the resulting polyurethane foams had density versus compressive properties similar to polyurethane foams made from 100% petroleum-based polyol. The density and compressive strength of foams were affected by the hydroxyl number of polyols, but the thermal conductivity of foams was not. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007

101 citations

Journal ArticleDOI
TL;DR: In this paper, the effect of deep fat frying on oil degradation, total phenols (TP) and total antioxidant activity (TAA) of hazelnut, corn, soybean and olive oils were investigated.
Abstract: In this study, the effect of deep fat frying on oil degradation, total phenols (TP) and total antioxidant activity (TAA) of hazelnut, corn, soybean and olive oils were investigated. Oil degradation and oxidation were monitored by measuring the total polar compounds (TPC) and the peroxide value (PV). The amount of TPC in corn, soybean and olive oils increased significantly with the time increment (p < 0.05). The PV of the oils did not exceed the maximum acceptable limit of 10 mequiv O2/kg after 125 min frying except for hazelnut oil (10.64 mequiv O2/kg). Deep-fat frying did not cause any significant change in the TP of corn oil, soybean oil and olive oil (p < 0.05). A significant decrease in the antioxidant activity was observed after 50 min frying using hazelnut oil and corn oil (p < 0.05). However, the antioxidant activity of soybean oil and olive oil significantly decreased after 75 and 25 min frying, respectively.

101 citations


Network Information
Related Topics (5)
Fatty acid
74.5K papers, 2.2M citations
85% related
Polyunsaturated fatty acid
35.4K papers, 1.2M citations
83% related
Starch
50.2K papers, 1M citations
82% related
Fermentation
68.8K papers, 1.2M citations
80% related
Vitamin E
23.6K papers, 801.4K citations
78% related
Performance
Metrics
No. of papers in the topic in previous years
YearPapers
2023160
2022329
2021335
2020359
2019435
2018593