Showing papers on "Spatial light modulator published in 2016"
••
TL;DR: It is hoped this proof-of-principle demonstration of high-fidelity atom-array preparations will be useful for deterministic loading of N single atoms, especially on arbitrary lattice locations, and also for real-time qubit shuttling in high-dimensional quantum computing architectures.
Abstract: Establishing a reliable method to form scalable neutral-atom platforms is an essential cornerstone for quantum computation, quantum simulation and quantum many-body physics. Here we demonstrate a real-time transport of single atoms using holographic microtraps controlled by a liquid-crystal spatial light modulator. For this, an analytical design approach to flicker-free microtrap movement is devised and cold rubidium atoms are simultaneously rearranged with 2N motional degrees of freedom, representing unprecedented space controllability. We also accomplish an in situ feedback control for single-atom rearrangements with the high success rate of 99% for up to 10 μm translation. We hope this proof-of-principle demonstration of high-fidelity atom-array preparations will be useful for deterministic loading of N single atoms, especially on arbitrary lattice locations, and also for real-time qubit shuttling in high-dimensional quantum computing architectures. It would be desirable to have a reliable and scalable method to manipulate neutral-atoms for the creation of controllable quantum systems. Here the authors demonstrate real-time transport of single rubidium atoms in holographic microtraps controlled by liquid-crystal spatial light modulators.
187 citations
••
TL;DR: The real-world scenes that are usually distorted by a Fourier lens or an SLM in the conventional holographic display can be observed without visual disturbance by using the proposed mirror-lens HOE (MLHOE).
Abstract: A holographic display system for realizing a three-dimensional optical see-through augmented reality (AR) is proposed. A multi-functional holographic optical element (HOE), which simultaneously performs the optical functions of a mirror and a lens, is adopted in the system. In the proposed method, a mirror that is used to guide the light source into a reflection type spatial light modulator (SLM) and a lens that functions as Fourier transforming optics are recorded on a single holographic recording material by utilizing an angular multiplexing technique of volume hologram. The HOE is transparent and performs the optical functions just for Bragg matched condition. Therefore, the real-world scenes that are usually distorted by a Fourier lens or an SLM in the conventional holographic display can be observed without visual disturbance by using the proposed mirror-lens HOE (MLHOE). Furthermore, to achieve an optimized optical recording condition of the MLHOE, the optical characteristics of the holographic material are measured. The proposed holographic AR display system is verified experimentally.
170 citations
••
TL;DR: This work reports the broadband characterization of the propagation of light through a multiple scattering medium by means of its multispectral transmission matrix and demonstrates spatiotemporal focusing of the pulse at any arbitrary position and time with any desired spectral shape.
Abstract: We report the broadband characterization of the propagation of light through a multiple scattering medium by means of its multispectral transmission matrix. Using a single spatial light modulator, our approach enables the full control of both the spatial and spectral properties of an ultrashort pulse transmitted through the medium. We demonstrate spatiotemporal focusing of the pulse at any arbitrary position and time with any desired spectral shape. Our approach opens new perspectives for fundamental studies of light-matter interaction in disordered media, and has potential applications in sensing, coherent control, and imaging.
121 citations
••
11 Jul 2016
TL;DR: The holographic optical elements (HOEs) as transparent additive layers are almost free from diffraction unlike spatial light modulator layers, which makes this additive light field display more advantageous when modifying the number of layers, thickness, and pixel density compared with conventional compressive displays.
Abstract: We propose a see-through additive light field display as a novel type of compressive light field display. We utilize holographic optical elements (HOEs) as transparent additive layers. The HOE layers are almost free from diffraction unlike spatial light modulator layers, which makes this additive light field display more advantageous when modifying the number of layers, thickness, and pixel density compared with conventional compressive displays. Meanwhile, the additive light field display maintains advantages of compressive light field displays. The proposed additive light field display shows bright and full-color volumetric images in high definition. In addition, users can view real-world scenes beyond the displays. Hence, we expect that our method can contribute to the realization of augmented reality. Here, we describe implementation of a prototype additive light field display with two additive layers, evaluate the performance of transparent HOE layers, describe several results of display experiments, discuss the diffraction effect of spatial light modulators, and analyze the ability of the additive light field display to express uncorrelated light fields.
119 citations
••
TL;DR: Six hologram generation techniques are tested in the creation of a variety of modes as well as a photographic image: rating the methods according to obtained mode quality and power.
Abstract: Whether in art or for QR codes, images have proven to be both powerful and efficient carriers of information. Spatial light modulators allow an unprecedented level of control over the generation of optical fields by using digital holograms. There is no unique way of obtaining a desired light pattern however, leaving many competing methods for hologram generation. In this paper, we test six hologram generation techniques in the creation of a variety of modes as well as a photographic image: rating the methods according to obtained mode quality and power. All techniques compensate for a non-uniform mode profile of the input laser and incorporate amplitude scaling. We find that all methods perform well and stress the importance of appropriate spatial filtering. We expect these results to be of interest to those working in the contexts of microscopy, optical trapping or quantum image creation.
118 citations
••
TL;DR: The results indicate that this method can effectively reduce the speckle in the reconstruction in 3-D holographic display and is free of iteration which allows improving the image quality and the calculation speed at the same time.
Abstract: The purpose of this study is to implement speckle reduced three-dimensional (3-D) holographic display by single phase-only spatial light modulator (SLM). The complex amplitude of hologram is transformed to pure phase value based on double-phase method. To suppress noises and higher order diffractions, we introduced a 4-f system with a filter at the frequency plane. A blazing grating is proposed to separate the complex amplitude on the frequency plane. Due to the complex modulation, the speckle noise is reduced. Both computer simulation and optical experiment have been conducted to verify the effectiveness of the method. The results indicate that this method can effectively reduce the speckle in the reconstruction in 3-D holographic display. Furthermore, the method is free of iteration which allows improving the image quality and the calculation speed at the same time.
114 citations
••
TL;DR: This work presents color holographic display, which is based on a single phase only spatial light modulator (SLM), which fully utilizes SLM bandwidth and has capability of full-color, full frame rate imaging of outstanding quality.
Abstract: This work presents color holographic display, which is based on a single phase only spatial light modulator (SLM). In the display entire area of the SLM is illuminated by an on-axis white light beam generated by a single large LED. The holographic display fully utilizes SLM bandwidth and has capability of full-color, full frame rate imaging of outstanding quality. This is achieved through: (i) optimal use of the source coherence volume, (ii) application of the single white light LED source, (iii) a development of a novel concept of color multiplexing technique with color filter mask in Fourier plane of the SLM, (iv) and a complex coding with improved diffraction efficiency. Within experimental part of the paper we show single color, full-color holographic 2D and 3D images generated for reconstruction depth exceeding 10 cm.
94 citations
••
TL;DR: An opportunity of producing the widest variety of "free-form" 4G optical components with arbitrary spatial patterns of the optical anisotropy axis orientation with the aid of a digital spatial light polarization converter (DSLPC).
Abstract: Geometrical phase or the fourth generation (4G) optics enables realization of optical components (lenses, prisms, gratings, spiral phase plates, etc.) by patterning the optical axis orientation in the plane of thin anisotropic films. Such components exhibit near 100% diffraction efficiency over a broadband of wavelengths. The films are obtained by coating liquid crystalline (LC) materials over substrates with patterned alignment conditions. Photo-anisotropic materials are used for producing desired alignment conditions at the substrate surface. We present and discuss here an opportunity of producing the widest variety of "free-form" 4G optical components with arbitrary spatial patterns of the optical anisotropy axis orientation with the aid of a digital spatial light polarization converter (DSLPC). The DSLPC is based on a reflective, high resolution spatial light modulator (SLM) combined with an "ad hoc" optical setup. The most attractive feature of the use of a DSLPC for photoalignment of nanometer thin photo-anisotropic coatings is that the orientation of the alignment layer, and therefore of the fabricated LC or LC polymer (LCP) components can be specified on a pixel-by-pixel basis with high spatial resolution. By varying the optical magnification or de-magnification the spatial resolution of the photoaligned layer can be adjusted to an optimum for each application. With a simple "click" it is possible to record different optical components as well as arbitrary patterns ranging from lenses to invisible labels and other transparent labels that reveal different images depending on the side from which they are viewed.
88 citations
••
TL;DR: An overview of the advances of ray-based and wavefront-based 3D display technologies, including integral photography and holography, and the integration of those technologies with digital information systems is provided.
Abstract: A perfect three-dimensional (3D) display that satisfies all depth cues in human vision is possible if a light field can be reproduced exactly as it appeared when it emerged from a real object. The light field can be generated based on either light ray or wavefront reconstruction, with the latter known as holography. This paper first provides an overview of the advances of ray-based and wavefront-based 3D display technologies, including integral photography and holography, and the integration of those technologies with digital information systems. Hardcopy displays have already been used in some applications, whereas the electronic display of a light field is under active investigation. Next, a fundamental question in this technology field is addressed: what is the difference between ray-based and wavefront-based methods for light-field 3D displays? In considering this question, it is of particular interest to look at the technology of holographic stereograms. The phase information in holography contributes to the resolution of a reconstructed image, especially for deep 3D images. Moreover, issues facing the electronic display system of light fields are discussed, including the resolution of the spatial light modulator, the computational techniques of holography, and the speckle in holographic images.
87 citations
•
TL;DR: In this paper, a coaxial interference of a vortex beam and a plane wave is used to produce 3D spiral optical fields. But, the spiral fields are typically confined to non-chiral cylindrical geometry due to two-dimensional doughnut intensity profile of optical vortices.
Abstract: Optical vortices, as a kind of structured beam with helical phase wavefronts and doughnut shape intensity distribution, have been used for fabricating chiral structures in metal and spiral patterns in anisotropic polarization-dependent azobenzene polymer. However, in isotropic polymer, the fabricated microstructures are typically confined to non-chiral cylindrical geometry due to two-dimensional doughnut intensity profile of optical vortices. Here we develop a powerful strategy for realizing chiral microstructures in isotropic material by coaxial interference of a vortex beam and a plane wave, which produces three-dimensional (3D) spiral optical fields. This coaxial interference beams are creatively produced by designing the contrivable holograms consisting of azimuthal phase and equiphase loaded on liquid-crystal spatial light modulator. Then, in isotropic polymer, 3D chiral microstructures are achieved under illumination of the coaxial interference femtosecond laser beams with their chirality controlled by the topological charge. Our further investigation reveals that the spiral lobes and chirality are caused by the interfering patterns and helical phase wavefronts, respectively. This technique is simple, stable, and easy-operation, and offers broad applications in optical tweezers, optical communications and fast metamaterial fabrication.
86 citations
••
TL;DR: This work theoretically design and experimentally demonstrate one kind of planar Bessel beam generators based on metasurfaces with analytical structures perforated in ultra-thin metallic screens and finds applications in future optical communication, nanofabrication and super-resolution imaging, etc.
Abstract: Non-diffracting Bessel beams, including zero-order and high-order Bessel Beams which carry orbital angular momentum (OAM), enable a variety of important applications in optical micromanipulation, sub-diffraction imaging, high speed photonics/quantum communication, etc. The commonly used ways to create Bessel beams, including an axicon or a digital hologram written to a spatial light modulator (SLM), have great challenges to operate at the nanoscale. Here we theoretically design and experimentally demonstrate one kind of planar Bessel beam generators based on metasurfaces with analytical structures perforated in ultra-thin metallic screens. Continuous phase modulation between 0 to 2π is realized with a single element. In addition, due to the dispersionless phase shift stemming from spin-orbit interaction, the proposed device can work in a wide wavelength range. The results may find applications in future optical communication, nanofabrication and super-resolution imaging, etc.
••
TL;DR: A holographic grating is demonstrated, the far-field diffraction pattern of which is a perfect optical vortex (POV) array, which provides the possibility to generate multiple POVs simultaneously, and can be used in domains wheremultiple POVs are of high interest such as orbital angular momentum multiplexed fiber data transmission systems.
Abstract: We have demonstrated a holographic grating, the far-field diffraction pattern of which is a perfect optical vortex (POV) array. The diffraction order, as well as the topological charge of each spot in the array, is controllable. By setting different parameters when designing the hologram, the spot in different diffraction orders will be changed, resulting in the variance of the POV array. During the experiment, we uploaded holograms of different design on a phase-only spatial light modulator. We then observed POV arrays with different dimensions and topological charges using a CCD camera, which fit well with the simulation. This technique provides the possibility to generate multiple POVs simultaneously, and can be used in domains where multiple POVs are of high interest such as orbital angular momentum multiplexed fiber data transmission systems.
••
TL;DR: By mapping traditional amplitude modulation to spatial modulation and employing adaptive optics compensation technique, this work proposes and experimentally demonstrate a high-speed Bessel beam encoding/decoding free-space optical link through atmospheric turbulence.
Abstract: By mapping traditional amplitude modulation to spatial modulation and employing adaptive optics compensation technique, we propose and experimentally demonstrate a high-speed Bessel beam encoding/decoding free-space optical link through atmospheric turbulence. The Bessel beam encoding/decoding speed is not limited by the conventional slow switching response of a spatial light modulator (SLM) but is fully determined by the modulation rate of an intensity modulator, which easily supports tens of gigabits per second modulation and resultant encoding/decoding. We use an SLM loaded with a pseudorandom phase mask to emulate atmospheric turbulence in the laboratory environment. An adaptive optics closed loop is used to sense the phase distortion of an extra probe Gaussian beam and then compensate the distorted Bessel beams. A 20-Gbit/s Bessel beam encoding/decoding link with adaptive turbulence compensation is demonstrated in the experiment, showing favorable operation performance.
••
TL;DR: This work uses reflective geometry where a parallel-aligned spatial light modulator is used to spatially modulate two orthogonal linear polarizations and encode spiral phases with equal charge but with opposite signs onto the two polarization directions to encode a vector beam and add two axicon phases.
Abstract: We generate nondiffracting vector beams where the charge and the polarization state vary with the propagation distance. We use reflective geometry where a parallel-aligned spatial light modulator is used to spatially modulate two orthogonal linear polarizations. We encode spiral phases with equal charge but with opposite signs onto the two polarization directions to encode a vector beam and add two axicon phases. Both the charge and the phase shift between the two axicons can be varied along the focus line. We provide experimental results that demonstrate both features.
••
TL;DR: With the capability of a phase-only Fourier mask to generate arbitrary shapes of the holographic microtraps, it was possible to place single atoms at arbitrary geometries of a few μm size and even continuously reconfigure them by conveying each atom.
Abstract: We propose and demonstrate three-dimensional rearrangements of single atoms. In experiments performed with single 87Rb atoms in optical microtraps actively controlled by a spatial light modulator, we demonstrate various dynamic rearrangements of up to N = 9 atoms including rotation, 2D vacancy filling, guiding, compactification, and 3D shuffling. With the capability of a phase-only Fourier mask to generate arbitrary shapes of the holographic microtraps, it was possible to place single atoms at arbitrary geometries of a few μm size and even continuously reconfigure them by conveying each atom. For this purpose, we loaded a series of computer-generated phase masks in the full frame rate of 60 Hz of the spatial light modulator, so the animation of phase mask transformed the holographic microtraps in real time, driving each atom along the assigned trajectory. Possible applications of this method of transformation of single atoms include preparation of scalable quantum platforms for quantum computation, quantum simulation, and quantum many-body physics.
••
TL;DR: An approach for creating three-dimensional (3D) multifocal perfect vortices arrays by using a high numerical aperture objective and a novel pixel checkerboard method for adding phase information into the HPP is proposed.
Abstract: We proposed an approach for creating three-dimensional (3D) multifocal perfect vortices arrays by using a high numerical aperture objective. The position, orbital angular momentum states, number and diameter of the perfect vortices can be freely modulated by a special designed hybrid phase plate (HPP). HPP could be calculated by 3D phase shifting expression which is derived from Fourier transform theory of the Debye diffraction integral. Furthermore, we developed a novel pixel checkerboard method for adding phase information into the HPP. The segmentation of HPP is related to vortex quality and intensity uniformity. This method could fully use each pixel to modulate the light, since the spatial light modulator has to be used. Small size lattices could generate high quality and uniform intensity vortex arrays in tight focusing region, which may have potential applications in coupling, optical coding and decoding.
••
TL;DR: This work generates programmable vector beams with arbitrary q-plates encoded using a spatial light modulator system that can analyze new and exotic q-plate designs without the difficulty of fabricating individual plates.
Abstract: We generate programmable vector beams with arbitrary q-plates encoded using a spatial light modulator system. Consequently, we can analyze new and exotic q-plate designs without the difficulty of fabricating individual plates. We show experimental results for positive and negative integer and new fractional vector beam values.
••
TL;DR: The versatility of the experimental technique to generate partially coherent vortex beams with an arbitrary azimuthal index using only a spatial light modulator is illustrated by generating partially coherent beams with different coherence lengths and orbital angular momentum content, without any moving optical device.
Abstract: We present an experimental technique to generate partially coherent vortex beams with an arbitrary azimuthal index using only a spatial light modulator. Our approach is based on digitally simulating the intrinsic randomness of broadband light passing through a spiral phase plate. We illustrate the versatility of the technique by generating partially coherent beams with different coherence lengths and orbital angular momentum content, without any moving optical device. Consequently, we study its cross-correlation function in a wavefront folding interferometer. The comparison with theoretical predictions yields excellent agreement.
••
TL;DR: Adaptive correction, resulting in significant improvement in the axial resolution, has been demonstrated by imaging Tg(fli:GFP) zebrafish embryos.
Abstract: A methodology for the adaptive control and correction of phase aberrations in the illumination arm of a light-sheet fluorescence microscope has been developed. The method uses direct wavefront sensing on epi-fluorescent light to detect the aberration present in the sample. Using this signal, the aberrations in the illumination arm are subsequently corrected with a spatial light modulator in a feedforward mode. Adaptive correction, resulting in significant improvement in the axial resolution, has been demonstrated by imaging Tg(fli:GFP) zebrafish embryos.
••
20 Apr 2016TL;DR: In this article, the authors demonstrate all-optical wavefront shaping in integrated silicon-on-insulator photonic devices by modifying the spatial refractive index profile of the device employing ultraviolet pulsed laser excitation.
Abstract: Reconfigurable photonic devices capable of routing the flow of light enable flexible integrated-optic circuits that are not hardwired but can be externally controlled. Analogous to free-space spatial light modulators, we demonstrate all-optical wavefront shaping in integrated silicon-on-insulator photonic devices by modifying the spatial refractive index profile of the device employing ultraviolet pulsed laser excitation. Applying appropriate excitation patterns grants us full control over the optical transfer function of telecommunication-wavelength light traveling through the device, thus allowing us to redefine its functionalities. As a proof of concept, we experimentally demonstrate the routing of light between the ports of a multimode interference power splitter with more than 97% total efficiency and negligible losses. Wavefront shaping in integrated photonic circuits provides a conceptually new approach toward achieving highly adaptable and field-programmable photonic circuits with applications in optical testing and data communication.
••
TL;DR: In this article, a method to characterize the propagation of an ultrashort pulse of light through a multiple scattering medium by measuring its time-resolved transmission matrix is presented. But this method is based on the use of a spatial light modulator together with a coherent time-gated detection of the transmitted speckle field.
Abstract: We report a method to characterize the propagation of an ultrashort pulse of light through a multiple scattering medium by measuring its time-resolved transmission matrix. This method is based on the use of a spatial light modulator together with a coherent time-gated detection of the transmitted speckle field. Using this matrix, we demonstrate the focusing of the scattered pulse at any arbitrary position in space and time after the medium. Our approach opens different perspectives for both fundamental studies and applications in imaging and coherent control in disordered media.
••
TL;DR: The embellishment of existing microfluidic devices with integrated micropatterns via femtosecond laser MRAF-based holographic patterning (MHP) microfabrication proves two-photon polymerization (TPP) based on spatial light modulator (SLM) to be a rapid and powerful technology for chip functionalization.
Abstract: Rapid integration of high-quality functional devices in microchannels is in highly demand for miniature lab-on-a-chip applications. This paper demonstrates the embellishment of existing microfluidic devices with integrated micropatterns via femtosecond laser MRAF-based holographic patterning (MHP) microfabrication, which proves two-photon polymerization (TPP) based on spatial light modulator (SLM) to be a rapid and powerful technology for chip functionalization. Optimized mixed region amplitude freedom (MRAF) algorithm has been used to generate high-quality shaped focus field. Base on the optimized parameters, a single-exposure approach is developed to fabricate 200 × 200 μm microstructure arrays in less than 240 ms. Moreover, microtraps, QR code and letters are integrated into a microdevice by the advanced method for particles capture and device identification. These results indicate that such a holographic laser embellishment of microfluidic devices is simple, flexible and easy to access, which has great potential in lab-on-a-chip applications of biological culture, chemical analyses and optofluidic devices.
••
TL;DR: In this paper, the authors proposed the generation of novel composite vortex beams by coaxial superposition of Laguerre-Gaussian (LG) beams with common waist position and waist parameter.
••
TL;DR: In this paper, the authors demonstrate all-optical wavefront shaping in integrated silicon-on-insulator photonic devices by modifying the spatial refractive index profile of the device employing ultraviolet pulsed laser excitation.
Abstract: Reconfigurable photonic devices capable of routing the flow of light enable flexible integrated-optic circuits that are not hard-wired but can be externally controlled. Analogous to free-space spatial light modulators, we demonstrate all-optical wavefront shaping in integrated silicon-on-insulator photonic devices by modifying the spatial refractive index profile of the device employing ultraviolet pulsed laser excitation. Applying appropriate excitation patterns grants us full control over the optical transfer function of telecommunication-wavelength light travelling through the device, thus allowing us to redefine its functionalities. As a proof-of-concept, we experimentally demonstrate routing of light between the ports of a multimode interference power splitter with more than 97% total efficiency and negligible losses. Wavefront shaping in integrated photonic circuits provides a conceptually new approach toward achieving highly adaptable and field-programmable photonic circuits with applications in optical testing and data communication.
••
TL;DR: This work demonstrates a transmission of independent signals using individually shaped wavefronts employing a single segmented spatial light modulator for optical phase conjugation regarding each light signal.
Abstract: Multimode fibers are attractive for a variety of applications such as communication engineering and biophotonics. However, a major hurdle for the optical transmission through multimode fibers is the inherent mode mixing. Although an image transmission was successfully accomplished using wavefront shaping, the image information was not transmitted individually for each of the independent pixels. We demonstrate a transmission of independent signals using individually shaped wavefronts employing a single segmented spatial light modulator for optical phase conjugation regarding each light signal. Our findings pave the way towards transferring independent signals through strongly scattering media.
••
TL;DR: It is shown that by combining with the compressive sensing theory, the reconstructed 2D complex scattered field can be used to recover the 3D sample scattering density.
Abstract: Fourier ptychographic microscopy (FPM) is implemented through aperture scanning by an LCOS spatial light modulator at the back focal plane of the objective lens. This FPM configuration enables the capturing of the complex scattered field for a 3D sample both in the transmissive mode and the reflective mode. We further show that by combining with the compressive sensing theory, the reconstructed 2D complex scattered field can be used to recover the 3D sample scattering density. This implementation expands the scope of application for FPM and can be beneficial for areas such as tissue imaging and wafer inspection.
••
TL;DR: This work develops a non-iterative direct space beam shaping method to generate Bessel beams with high energy throughput from direct space with a single phase-only spatial light modulator for non-uniform input beams.
Abstract: Arbitrary shaping of the on-axis intensity of Bessel beams requires spatial modulation of both amplitude and phase. We develop a non-iterative direct space beam shaping method to generate Bessel beams with high energy throughput from direct space with a single phase-only spatial light modulator. For this purpose, we generalize the approach of Bolduc et al. to non-uniform input beams. We point out the physical limitations imposed on the on-axis intensity profile for unidirectional beams. Analytical, numerical and experimental results are provided.
••
TL;DR: Efficient optical modulation of surface-normal reflection in a novel device structure integrating graphene on a high contrast grating (HCG) resonator indicates that the integrated structure of graphene-on-HCG shows great promise for display, imaging and interconnects applications with low-cost and large scalability.
Abstract: We demonstrate efficient optical modulation of surface-normal reflection in a novel device structure integrating graphene on a high contrast grating (HCG) resonator. As high as 11 dB extinction ratio is achieved by varying the voltage applied to a single atomic layer of graphene on a HCG resonator. The device topology facilitates easy fabrication of large 2D arrays, and free-space operation. We also demonstrate a graphene-oxide-graphene structure which can potentially operate at MHz operation speed. The devices are fully fabricated by standard CMOS compatible processes indicating that the integrated structure of graphene-on-HCG shows great promise for display, imaging and interconnects applications with low-cost and large scalability.
••
18 Nov 2016TL;DR: In this article, an all solid-state metamaterial based terahertz (THz) spatial light modulator (SLM) is presented, which uses high mobility 2DEG to manipulate the METAMAMELOR resonant frequency (0.45 THz) leading to wave modulation.
Abstract: An all solid-state metamaterial based terahertz (THz) spatial light modulator (SLM) is presented which uses high mobility 2DEG to manipulate the metamaterial resonant frequency (0.45 THz) leading to terahertz wave modulation. The 2DEG is created by embedding pseudomorphic high-electron mobility transistors in the capacitive gap of each electrical-LC resonator, allowing the charge density to be controlled with very low voltage (1 V) and modulating speeds up to 10 MHz while consuming sub-milliwatt power. We have demonstrated our SLM as a 2 × 2 pixel array operating around 0.45 THz by raster scanning a 6 × 6 image of an occluded metal object behind a thick polystyrene screen using a single-pixel THz imaging setup.
••
TL;DR: It was analytically demonstrated that the number of beams is determined by the horizontal number of pixels in the SLM NSLM that is imaged at the pupil plane of an objective lens and a distance parameter pd obtained by dividing the distance between adjacent beams by the diffraction-limited beam diameter.
Abstract: Massively parallel femtosecond laser processing with more than 1000 beams was demonstrated. Parallel beams were generated by a computer-generated hologram (CGH) displayed on a spatial light modulator (SLM). The key to this technique is to optimize the CGH in the laser processing system using a scheme called in-system optimization. It was analytically demonstrated that the number of beams is determined by the horizontal number of pixels in the SLM NSLM that is imaged at the pupil plane of an objective lens and a distance parameter pd obtained by dividing the distance between adjacent beams by the diffraction-limited beam diameter. A performance limitation of parallel laser processing in our system was estimated at NSLM of 250 and pd of 7.0. Based on these parameters, the maximum number of beams in a hexagonal close-packed structure was calculated to be 1189 by using an analytical equation.