scispace - formally typeset
Search or ask a question
Topic

Stamping

About: Stamping is a research topic. Over the lifetime, 22501 publications have been published within this topic receiving 83554 citations.


Papers
More filters
Journal ArticleDOI
TL;DR: In this article, a transfer stamping process is proposed to fabricate micro-scale organic flexible electrodes without residual layer, and no complex pre-process and steps are needed to estimate the deformation during pressing, the sagging height of the mold is analyzed with finite element method.

18 citations

Patent
10 Jan 1990
TL;DR: A process for manufacturing a light-modulating device comprising manufacturing (using known techniques, in particular, of extrusion, rolling, calendaring and coating) a film sheet or strip formed of at least one layer of electrolytic material applied to a counter-electrode in the form of a preferably flexible film, sheet, strip, or equivalent; and cutting out elements in form of dots, segments or strips in this composite sheet or film (by means of known techniques as mentioned in this paper ).
Abstract: A process for manufacturing a light-modulating device comprising manufacturing (using known techniques, in particular, of extrusion, rolling, calendaring and coating) a film sheet or strip formed of at least one layer of electrolytic material applied to a counter-electrode in the form of a preferably flexible film, sheet, strip, or equivalent; and cutting out elements in the form of dots, segments or strips in this composite sheet or film (by means of known techniques, in particular, punching, stamping and laser cutting).

18 citations

Patent
23 Jul 1979
TL;DR: An alignment system for the positioning of printing plates on offset printing presses which have an axially extending fastening channel is described in this article, which includes a stamping machine for punching out of register holes in the printing plate and the related plate masks.
Abstract: An alignment system for the positioning of printing plates on offset printing presses which have an axially extending fastening channel. The system includes of a stamping machine for the punching out of register holes in the printing plate and the related plate masks, a pre-mount table, a bending device for the printing plate and a blocking piece in the fastening channel.

18 citations

Patent
13 May 1985
TL;DR: An air ejector system for use in a horizontal or vertical stamping press which reciprocates the moving member of a die set to produce an annular product is described in this article.
Abstract: An air ejector system for use in a horizontal or vertical stamping press which reciprocates the moving member of a die set to produce an annular product. Air is introduced through a central punch for shedding and ejecting a slug. Air is also introduced through an annular knockout for shedding and ejecting a coaxially produced product. A resilient member retains the knockout in a position rearwardly of the punch and button die during the forward punching stroke. Valving sequentially introduces the air through the punch and knockout at the appropriate points in the reciprocating stamping cycle.

18 citations

Journal ArticleDOI
TL;DR: In this paper, the buckling behavior of a biologically evolving longan-shaped shell under external pressure was investigated using the measurements of 171 actual dried longan shells and a good agreement between experiments and numerical evaluations was obtained.

18 citations


Network Information
Related Topics (5)
Machining
121.3K papers, 1M citations
80% related
Welding
206.5K papers, 1.1M citations
76% related
Ultimate tensile strength
129.2K papers, 2.1M citations
75% related
Alloy
171.8K papers, 1.7M citations
73% related
Finite element method
178.6K papers, 3M citations
73% related
Performance
Metrics
No. of papers in the topic in previous years
YearPapers
2023150
2022280
2021190
20201,138
20191,801
20182,032