Showing papers on "Steric effects published in 2018"
TL;DR: In this paper, the synergistic control of the SH2 transition states of hydrogen abstraction by polar and steric effects provides a promising strategy in achieving site-selective C(sp3)-H functionalization under decatungstate anion photocatalysis.
Abstract: The synergistic control of the SH2 transition states of hydrogen abstraction by polar and steric effects provides a promising strategy in achieving site-selective C(sp3)–H functionalization under decatungstate anion photocatalysis. By using this photocatalytic approach, the C–H bonds of alkanes, alcohols, ethers, ketones, amides, esters, nitriles, and pyridylalkanes were functionalized site-selectively. In the remarkable case of a 2,4-disubstituted cyclohexanone bearing five methyl, five methylene, and three methine C–H bonds, one methine C–H bond in the isoamyl tether was selectively functionalized.
247 citations
TL;DR: Through balancing the Lewis acidity, Lewis basicity, and steric effects of LPs, LPP has shown several unique advantages or intriguing opportunities compared to other polymerization techniques and demonstrated its broad polar monomer scope, high activity, control or livingness, and complete chemo- or regioselectivity.
Abstract: The development of new or more sustainable, active, efficient, controlled, and selective polymerization reactions or processes continues to be crucial for the synthesis of important polymers or materials with specific structures or functions. In this context, the newly emerged polymerization technique enabled by main-group Lewis pairs (LPs), termed as Lewis pair polymerization (LPP), exploits the synergy and cooperativity between the Lewis acid (LA) and Lewis base (LB) sites of LPs, which can be employed as frustrated Lewis pairs (FLPs), interacting LPs (ILPs), or classical Lewis adducts (CLAs), to effect cooperative monomer activation as well as chain initiation, propagation, termination, and transfer events. Through balancing the Lewis acidity, Lewis basicity, and steric effects of LPs, LPP has shown several unique advantages or intriguing opportunities compared to other polymerization techniques and demonstrated its broad polar monomer scope, high activity, control or livingness, and complete chemo- or...
176 citations
TL;DR: In this paper, the recent progress of aluminum complexes supported by β-diketiminate ligands and Cp∗(pentamethylcyclopentadienyl) substituents with univalent aluminum as reagents as well as aluminum hydrides in reactions is discussed.
90 citations
TL;DR: It is demonstrated that isomorphous substitution can effectively optimize the reactivity of surface catalytic active sites in addition to influencing optoelectronic properties, affording a better understanding of the photocatalytic CO2 reduction mechanism.
Abstract: Frustrated Lewis pairs (FLPs) created by sterically hindered Lewis acids and Lewis bases have shown their capacity for capturing and reacting with a variety of small molecules, including H2 and CO2, and thereby creating a new strategy for CO2 reduction. Here, the photocatalytic CO2 reduction behavior of defect-laden indium oxide (In2O3-x (OH) y ) is greatly enhanced through isomorphous substitution of In3+ with Bi3+, providing fundamental insights into the catalytically active surface FLPs (i.e., In-OH···In) and the experimentally observed "volcano" relationship between the CO production rate and Bi3+ substitution level. According to density functional theory calculations at the optimal Bi3+ substitution level, the 6s2 electron pair of Bi3+ hybridizes with the oxygen in the neighboring In-OH Lewis base site, leading to mildly increased Lewis basicity without influencing the Lewis acidity of the nearby In Lewis acid site. Meanwhile, Bi3+ can act as an extra acid site, serving to maximize the heterolytic splitting of reactant H2, and results in a more hydridic hydride for more efficient CO2 reduction. This study demonstrates that isomorphous substitution can effectively optimize the reactivity of surface catalytic active sites in addition to influencing optoelectronic properties, affording a better understanding of the photocatalytic CO2 reduction mechanism.
87 citations
TL;DR: In this article, a Minisci-type alkylation reaction of N-heteroarenes with alkanes under the reagent control of a hypervalent iodine oxidant PFBI-OH was reported.
Abstract: We report a highly efficient and chemoselective Minisci-type alkylation reaction of N-heteroarenes with alkanes under the reagent control of a hypervalent iodine oxidant PFBI-OH. In addition to the high reactivity, PFBI-OH demonstrated a high steric sensitivity for H abstraction of alkanes. This reaction is selective for more sterically accessible secondary C–H bonds over weaker tertiary C–H bonds. High selectivity toward penultimate methylene groups was observed for a wide range of acyclic alkanes.
86 citations
TL;DR: This work reports a new generation CO2 -responsive system, differing from the first-generation ones based on an acid-base equilibrium mechanism, built as the macromolecular FLP, which can bind CO2 to drive micellar formation, in which CO2 as a cross-linker bridges the block chains.
Abstract: Frustrated Lewis pairs (FLP), a couple comprising a sterically encumbered Lewis acid and Lewis base, can offer latent reactivity for activating inert gas molecules. However, their use as a platform for fabricating gas-responsive materials has not yet developed. Merging the FLP concept with polymers, we report a new generation CO2 -responsive system, differing from the first-generation ones based on an acid-base equilibrium mechanism. Two complementary Lewis acidic and basic block copolymers, installing bulky borane- and phosphine-containing blocks, were built as the macromolecular FLP. They can bind CO2 to drive micellar formation, in which CO2 as a cross-linker bridges the block chains. This dative bonding endows the assembly with ultrafast response (<20 s), thermal reversibility, and excellent reproducibility. Moreover, such micelles bound highly active CO2 can function as nanocatalysts for recyclable C1 catalysis, opening a new direction of sustainable CO2 conversion.
79 citations
TL;DR: Both experimental results and DFT computations suggest that the presence of a planar conjugate bipyridyl unit or its isoquinoline derivative is a key feature for stabilizing low valent CoI species toward proton binding.
Abstract: Structural modifications of molecular cobalt catalysts have provided important insights into the structure-function relationship for the hydrogen evolution reaction. We have shown that replacement of equatorial pyridines with more basic and conjugate isoquinoline groups of a pentadentate ligand results in lower overpotential and higher catalytic activity for electro- and photolytic H2 production in aqueous solutions. To fully understand the electronic and steric effects of the axial group that lies trans to the proposed cobalt hydride intermediate, isoquinoline groups were introduced in two new pentadentate ligands, N, N-bis(2-pyridinylmethyl)[3-(2-pyridinyl)isoquinoline)]-1-methanamine (DPA-1-MPI) and N, N-bis(2-pyridinylmethyl)[1-(2-pyridinyl)-isoquinoline)]-3-methanamine (DPA-3-MPI). Despite a slight structural difference of the introduced isoquinoline group, the resulting cobalt complexes display drastic changes in their electro- and photochemical properties. There are positive shifts of 290 and 260 mV, respectively, for the CoII/CoI and CoIII-H/CoII-H couples from [Co(DPA-1-MPI)(H2O)](PF6)3 to [Co(DPA-3-MPI)(H2O)](PF6)3, with the former being ∼32 times as active as the latter in photocatalytic H2 production. Density functional theory (DFT) calculations show that the protonation of CoI to yield the CoIII-H species is energetically more favorable for [Co(DPA-1-MPI)(H2O)](PF6)3 than that of [Co(DPA-3-MPI)(H2O)](PF6)3. Both experimental results and DFT computations suggest that the presence of a planar conjugate bipyridyl unit or its isoquinoline derivative is a key feature for stabilizing low valent CoI species toward proton binding. The incorporation of an electron-donating group trans to the proposed Co-H species also facilitates proton binding and H-H bond formation, which is proposed to occur by the heterolytic coupling of CoII-H species. The overall catalytic H2 evolution is presented as the modified electron transfer (E)-proton transfer (C)-electron transfer (E)-proton transfer (C) (mod-ECEC) pathway. This study provides important new insight into the electronic and steric factors controlling catalytic H2 production by Co complexes with pentadentate ligands.
75 citations
TL;DR: The living polymerization of conjugated polar alkenes such as methacrylates by a noninteracting, authentic frustrated Lewis pair (FLP) has remained elusive ever since the report on FLP-promoted polymerization in 2010.
Abstract: The living polymerization of conjugated polar alkenes such as methacrylates by a noninteracting, authentic frustrated Lewis pair (FLP) has remained elusive ever since the report on FLP-promoted polymerization in 2010. Here we report that the polymerization of alkyl methacrylates by a FLP system based on a strongly nucleophilic N-heterocyclic olefin (NHO) Lewis base and sterically encumbered but modestly strong Lewis acid MeAl(4-Me-2,6-tBu2-C6H2O)2 is not only rapid but also living. This living polymerization was indicated by the formation of a linear, living chain, capped with NHO/H chain ends, without backbiting-derived cyclic chain ends. The true livingness of this FLP-promoted polymerization has been unequivocally verified by five lines of evidence, including the predicted polymer number-average molecular weight (Mn, up to 351 kg·mol–1) coupled with low dispersity (Đ = 1.05) values; obtained high to quantitative initiation efficiencies; an observed linear increase of polymer Mn vs monomer conversion an...
75 citations
TL;DR: This work suggests a potential generally applicable allosteric mechanism for the regulation of DUBs via steric blockade, as showcased by the discovery of IU1-248 which is 10-fold more potent than IU1.
Abstract: The ubiquitin system is important for drug discovery, and the discovery of selective small-molecule inhibitors of deubiquitinating enzymes (DUBs) remains an active yet extremely challenging task. With a few exceptions, previously developed inhibitors have been found to bind the evolutionarily conserved catalytic centers of DUBs, resulting in poor selectivity. The small molecule IU1 was the first-ever specific inhibitor identified and exhibited surprisingly excellent selectivity for USP14 over other DUBs. However, the molecular mechanism for this selectivity was elusive. Herein, we report the high-resolution co-crystal structures of the catalytic domain of USP14 bound to IU1 and three IU1 derivatives. All the structures of these complexes indicate that IU1 and its analogs bind to a previously unknown steric binding site in USP14, thus blocking the access of the C-terminus of ubiquitin to the active site of USP14 and abrogating USP14 activity. Importantly, this steric site in USP14 is very unique, as suggested by structural alignments of USP14 with several known DUB X-ray structures. These results, in conjunction with biochemical characterization, indicate a coherent steric blockade mechanism for USP14 inhibition by compounds of the IU series. In light of the recent report of steric blockade of USP7 by FT671, this work suggests a potential generally applicable allosteric mechanism for the regulation of DUBs via steric blockade, as showcased by our discovery of IU1-248 which is 10-fold more potent than IU1.
74 citations
TL;DR: In this paper, the metal-oxygen intermediates react as nucleophiles and electron donors as well as electrophiles and acceptors in electrophilic and nucleophilic reactions.
71 citations
TL;DR: Through a combined experimental and computational approach, the reaction mechanism of the addition of fluoroarenes to Mg–Mg bonds has been determined as a concerted SNAr-like pathway in which one Mg centre acts as a nucleophile and the other an electrophile.
Abstract: Through a combined experimental and computational (DFT) approach, the reaction mechanism of the addition of fluoroarenes to Mg–Mg bonds has been determined as a concerted SNAr-like pathway in which one Mg centre acts as a nucleophile and the other an electrophile. The experimentally determined Gibbs activation energy for the addition of C6F6 to a Mg–Mg bond of a molecular complex, ΔG‡298 K(experiment) = 21.3 kcal mol−1 is modelled by DFT with the ωB97X functional, ΔG‡298 K(DFT) = 25.7 kcal mol−1. The transition state for C–F activation involves a polarisation of the Mg–Mg bond and significant negative charge localisation on the fluoroarene moiety. This transition state is augmented by stabilising closed-shell Mg⋯Fortho interactions that, in combination with the known trends in C–F and C–M bond strengths in fluoroarenes, provide an explanation for the experimentally determined preference for C–F bond activation to occur at sites flanked by ortho-fluorine atoms. The effect of modification of both the ligand coordination sphere and the nature and polarity of the M–M bond (M = Mg, Zn, Al) on C–F activation has been investigated. A series of highly novel β-diketiminate stabilised complexes containing Zn–Mg, Zn–Zn–Zn, Zn–Al and Mg–Al bonds has been prepared, including the first crystallographic characterisation of a Mg–Al bond. Reactions of these new M–M containing complexes with perfluoroarenes were conducted and modelled by DFT. C–F bond activation is dictated by the steric accessibility, and not the polarity, of the M–M bond. The more open coordination complexes lead to enhanced Mg⋯Fortho interactions which in turn lower the energy of the transition states for C–F bond activation.
TL;DR: The relaxation of the excited-state structure of DPAC and its numerous analogues could be mimicked by model structures Mx-My, demonstrating for the first time the the conformation change from bent-to-planar and hence a large range of energy-gap tuning of polycyclic conjugated structures controlled by the steric hindrance.
Abstract: ortho-Methyl effects are exploited to tune steric hindrance between side-chain N,N'-diaryls and polycyclic dihydrodibenzo[a,c]phenazine, and in turn control the conformations of N,N'-diphenyl-dihydrodibenzo[a,c]phenazine (DPAC) and its ortho-methyl derivatives Mx-My (x=0, 1 or 2, y=1 or 2, x and y correlate with the number of methyl groups in the ortho-positiond of N,N'-diphenyl). The magnitude of steric hindrance increases as x and y increase, and the V-shaped dihydrodibenzo[a,c]phenazine skeleton is gradually tuned from a bent (DPAC) to planar (M2-M2) structure in the ground state. As a result, the relaxation of the excited-state structure of DPAC and its numerous analogues could be mimicked by model structures Mx-My, demonstrating for the first time the the conformation change from bent-to-planar and hence a large range of energy-gap tuning of polycyclic conjugated structures controlled by the steric hindrance.
TL;DR: In this paper, the authors reported that in selective hydrogenation of 1,3-butadiene, graphene supported Pd1 single atoms, synthesized by atomic layer deposition, exhibited expressively 100% butenes selectivity at 100% conversion at near ambient temperature, regardless of hydrogen partial pressures.
TL;DR: Iridium-catalyzed, β-selective silylations of unactivated C(sp3)-H bonds of aliphatic amines to form silapyrrolidines that are both silicon-containing analogs of common saturated nitrogen heterocycles and precursors to 1,2-amino alcohols by Tamao-Fleming oxidation are reported.
Abstract: The functionalization of unactivated C(sp3)-H bonds of aliphatic amines catalyzed by transition-metal complexes is important because amine-based functionality is present in a majority of biologically active molecules and commercial pharmaceuticals. However, such reactions are underdeveloped and challenging to achieve in general because the basicity and reducing properties of alkylamines tends to interfere with potential reagents and catalysts. The functionalization of C-H bonds β to the nitrogen of aliphatic amines to form prevalent 1,2-amino functionalized structures is particularly challenging because the C-H bond β to nitrogen is stronger than the C-H bond α to nitrogen, and the nitrogen in the amine or its derivatives usually directs a catalyst to react at more distal γ- and δ-C-H bonds to form 5- or 6-membered metallacyclic intermediate. The enantioselective functionalization of a C-H bond at any position in amines also has been vexing and is currently limited to reactions of specific, sterically hindered, cyclic structures. We report iridium-catalyzed, β-selective silylations of unactivated C(sp3)-H bonds of aliphatic amines to form silapyrrolidines that are both silicon-containing analogs of common saturated nitrogen heterocycles and precursors to 1,2-amino alcohols by Tamao-Fleming oxidation. These silylations of amines are accomplished by introducing a simple methylene linker between the heteroatom and silicon that has not been used previously for the silylation of C-H bonds. The reactions occur with high enantioselectivity when catalyzed by complexes of new chiral, pyridyl imidazoline ligands, and the rates of reactions with catalysts of these highly basic ligands are particularly fast, occuring in some cases at or even below room temperature.
TL;DR: This review presents recent developments of boron-based catalysts applied in the field of C-C bond-formation reactions, which are classified into four kinds on the basis of the type of Boron catalyst.
Abstract: Because the construction of the C-C bond is one of the most significant reactions in organic chemistry, the development of an efficient strategy has attracted much attention throughout the synthetic community. Among various protocols to form C-C bonds, organoboron compounds are not just limited to stoichiometric reagents, but have also made great achievements as catalysts because of the easy modification of the electronic and steric impacts on the boron center. This review presents recent developments of boron-based catalysts applied in the field of C-C bond-formation reactions, which are classified into four kinds on the basis of the type of boron catalyst: 1) highly Lewis acidic borane, B(C6 F5 )3 ; 2) organoboron acids, RB(OH)2 , and their ester derivatives; 3) borenium ions, (R2 BL)X; and 4) other miscellaneous kinds.
TL;DR: Origins of stereoselectivity in ROP of racemic chiral cyclic esters promoted by achiral yttrium complexes, resulting in the formation of highly heterotactic polylactide, and highly syndiotactic or, more uniquely, highly isotactic poly(3-hydroxybutyrate)s, are discussed.
TL;DR: This FLP catalyst system exhibits exceptionally long lifetime polymerization performance even in the absence of free MMA, which could reinitiate the desired living polymerization after the resulting system was held at RT for 24 h.
Abstract: A strong organophosphorus superbase, N-(diphenylphosphanyl)-1,3-diisopropyl-4,5-dimethyl-1,3-dihydro-2H-imidazol-2-imine (IAP3) was combined with a sterically encumbered but modestly acidic Lewis acid (LA), (4-Me-2,6-t Bu2 -C6 H2 O)Ali Bu2 ((BHT)Ali Bu2 ), to synergistically promote the frustrated Lewis pair (FLP)-catalyzed living polymerization of methyl methacrylate (MMA), achieving ultrahigh molecular weight (UHMW) poly(methyl methacrylate) (PMMA) with Mn up to 1927 kg mol-1 and narrow molecular weight distribution (MWD) at room temperature (RT). This FLP catalyst system exhibits exceptionally long lifetime polymerization performance even in the absence of free MMA, which could reinitiate the desired living polymerization after the resulting system was held at RT for 24 h.
TL;DR: In this paper, the corrosion inhibition effect of henna extract: lawsone, gallic acid and α-d -glucose, on the Fe (001) surface was studied using density functional theory.
TL;DR: The selective hydrogenation of α,β-unsaturated aldehydes to unsaturated alcohols can reach high selectivity and activity at room temperature using Pt nanoparticles immobilized on a non-porous Al2O3 support stabilized by aspartic acid.
TL;DR: The influence of conformational rigidity in the precursors on the formation of a [4+4] imine cage with truncated tetrahedral geometry is discussed.
Abstract: The synthesis of shape-persistent organic cage compounds is often based on the usage of multiple dynamic covalent bond formation (such as imines) of readily available precursors. By careful choice of the precursors geometry, the geometry and size of the resulting cage can be accurately designed and indeed a number of different geometries and sizes have been realized to date. Despite of this fact, little is known about the precursors conformational rigidity and steric preorganization of reacting functional groups on the outcome of the reaction. Herein, the influence of conformational rigidity in the precursors on the formation of a [4+4] imine cage with truncated tetrahedral geometry is discussed.
TL;DR: In this paper, an effective polymerization of MC using Lewis pairs consisting of an NHC or N-heterocyclic olefin (NHO) Lewis base and a group 13 Lewis acid, in particular sterically encumbered methylaluminum bis(2,6-di-tert-butyl-4-methylphenoxide) (MAD), was reported.
Abstract: Crotonates, unlike their constitutional isomers of methacrylates, are not readily polymerized by conventional radical or anionic polymerization methods. A recent effort in polymerizing biorenewable methyl crotonate (MC) using organic N-heterocyclic carbene (NHC) initiators led to only dimerization. This contribution reports an effective polymerization of MC using Lewis pairs consisting of an NHC or N-heterocyclic olefin (NHO) Lewis base and a group 13 Lewis acid, in particular sterically encumbered methylaluminum bis(2,6-di-tert-butyl-4-methylphenoxide) (MAD), producing high-molecular-weight poly(MC) (PMC) with Mn up to 161 kg/mol under ambient temperature and solvent free conditions. Depending on the nature of the Lewis pair and reaction conditions, the polymerization proceeds either catalytically producing lower molecular weight PMC or noncatalytically leading to high-molecular-weight PMC. Investigations into initiation mechanisms have revealed both nucleophilic and basic pathways. The observation of th...
TL;DR: In this paper, a series of donor-acceptor-donor (D-A-D) compounds featuring dibenzothiophene (DBT) and phenothiazine (PTZ) units are presented.
Abstract: A series of novel donor–acceptor–donor (D–A–D) compounds featuring dibenzothiophene (DBT) and phenothiazine (PTZ) units are presented. A different degree of steric hindrance between the donor and acceptor fragments is achieved by the systematic changes of donor substituents (methyl, iso-propyl, tert-butyl groups). This leads to the tuning of photophysical properties by conformational control. The unsubstituted DPTZ–DBT molecule exists in both equatorial and axial forms in the ground state, due to the ability of PTZ to form H-extra and H-intra folded conformers that allow formation of parallel quasi-axial (ax) and perpendicular quasi-equatorial (eq) conformers, respectively. However, the equatorial conformer prevails in the excited state. This leads to strong room temperature phosphorescence (RTP) in the green region with high phosphorescence quantum yield (60 ± 8%). Under the influence of bulky substituents, the alkyl-DPTZ–DBT derivatives change molecular conformation, preventing formation of the excited charge transfer state. Hence, blue, but much weaker, phosphorescence is observed. The less bulky methyl substituent on the donor results in dual RTP (blue and green), apparently violating Kasha's rule imposed by the modulation of the barriers between excited states. The experimental results are supported by DFT calculations in the ground and excited state. Control of conformation with substituents is an effective strategy for tuning the excited state properties of D–A–D molecules for RTP emission.
TL;DR: In this article, the outstanding basicity of negative charged Lindqvist type polyoxoniobate K7HNb6O19·13H2O has been proved experimentally as well as by theoretical NBO calculations, the results reveal high electron density on terminal and bridging oxygen atoms of niobate anion.
TL;DR: It is concluded that O-H cleavage occurs by a concerted H atom transfer (HAT) mechanism and that the MnIV(OH) complex is a much more powerful H atom abstractor than the higher-valent MnV(O), or even some FeIV(O) complexes.
Abstract: High-valent metal-hydroxide species are invoked as critical intermediates in both catalytic, metal-mediated O2 activation (e.g., by Fe porphyrin in Cytochrome P450) and O2 production (e.g., by the Mn cluster in Photosystem II). However, well-characterized mononuclear MIV(OH) complexes remain a rarity. Herein we describe the synthesis of MnIV(OH)(ttppc) (3) (ttppc = tris(2,4,6-triphenylphenyl) corrole), which has been characterized by X-ray diffraction (XRD). The large steric encumbrance of the ttppc ligand allowed for isolation of 3. The complexes MnV(O)(ttppc) (4) and MnIII(H2O)(ttppc) (1·H2O) were also synthesized and structurally characterized, providing a series of Mn complexes related only by the transfer of hydrogen atoms. Both 3 and 4 abstract an H atom from the O–H bond of 2,4-di-tert-butylphenol (2,4-DTBP) to give a radical coupling product in good yield (3 = 90(2)%, 4 = 91(5)%). Complex 3 reacts with 2,4-DTBP with a rate constant of k2 = 2.73(12) × 104 M–1 s–1, which is ∼3 orders of magnitude la...
TL;DR: The balance between attractive forces and repulsive steric crowding was studied for a series of Lewis acids of the type FTR3 (T = Si, Ge, Sn, Pb) which were allowed to interact with various bases.
Abstract: The tetravalent character of tetrel atoms leaves only limited room for an incoming nucleophile to approach and engage in a noncovalent bond with a tetrel atom. Any such approach can only occur at the expense of internal geometric distortions. The balance between attractive forces and repulsive steric crowding was studied for a series of Lewis acids of the type FTR3 (T = Si, Ge, Sn, Pb) which were allowed to interact with various bases. The strength and other properties of the tetrel bond are examined as the R groups are made progressively larger, varying from H and CH3 to isopropyl and tert-butyl, which induce steric crowding with the incoming base. The effects of crowding which impede the bond can be offset by enlarging the T atom, by adding electron-withdrawing substituents to the Lewis acid, or by considering stronger bases such as anions. The tetrel bond energies reach up to 10 kcal/mol for a pair of neutral molecules with no electron-withdrawing substituents on the Lewis acid. Adding −CF3 substituent...
TL;DR: Cooperative catalysis enables the direct enantioselective α-allylation of linear prochiral esters with 2-substituted allyl electrophiles through the recognition that metal-centered reactivity and the source of enantiocontrol are independent.
Abstract: Cooperative catalysis enables the direct enantioselective α-allylation of linear prochiral esters using 2-substituted allyl electrophiles. Critical to the successful development of the method was the recognition that metal-centered reactivity and the source of enantiocontrol are independent. This feature is unique to simultaneous catalysis events and permits logical tuning of the supporting ligands without compromising enantioselectivity.
TL;DR: The existence of intramolecular chalcogen bonds (IChBs) in 2,6-disubstituted arylchalcogen derivatives is determined by the substituents and the sigma hole donor behavior of the chalCogen atom in the molecule.
Abstract: The responsive behavior of an entity towards its immediate surrounding is referred to as an adaptive response. The adaptive responses of a noncovalent interaction at the molecular scale are reflected from its structural and functional roles. Intramolecular chalcogen bonding (IChB), an attractive interaction between a heavy chalcogen E (E = Se or Te) centered sigma hole and an ortho-heteroatom Lewis base donor D (D = O or N), plays an adaptive role in defining the structure and reactivity of arylchalcogen compounds. In this perspective, we describe the adaptive roles of a chalcogen centered Lewis acid sigma hole and a proximal Lewis base (O or N) in accommodating built-in steric stress in 2,6-disubstituted arylchalcogen compounds. From our perspective, the IChB components (a sigma hole and the proximal Lewis base) act in synergism to accommodate the overwhelming steric force. The adaptive responses of the IChB components are inferred from the observed molecular structures and reactivity. These include (a) adaptation of a conformation without IChBs, (b) adaptation of a conformation with weak IChBs, (c) twisting the skeletal aryl ring while maintaining IChBs, (d) ionization of the E–X bond (e.g., X = Br) to relieve stress and (e) intramolecular cyclization to relieve steric stress. A comprehensive approach, involving X-ray data analysis, density functional theory (DFT) calculations, reaction pattern analysis and principal component analysis (PCA), has been employed to rationalize the adaptive behaviors of IChBs in arylchalcogen compounds. We believe that the perception of ChB as an adaptive/stimulus responsive interaction would profit the futuristic approaches that would utilise ChB as self-assembly and molecular recognition tools.
TL;DR: In this article, a series of α-diimine Ni(II)-based catalysts with methyl ligand backbone and different substituents in aryl positions (Ni1−Ni6) were investigated.
Abstract: With Brookhart type α-diimine Ni(II) based catalysts, it is highly challenging to tune polymers branching level and branch-type distribution, which in turn strongly affects thermal and mechanical properties, through the aryl ortho-positions modification, while maintaining high turnover frequencies (TOFs). Herein, we are interested in performing a systematic investigation on the polymerization of 1-octene, 1-decene, and 1-octadecene catalyzed by a series of α-diimine nickel(II) complexes with methyl ligand backbone and different substituents in aryl positions (Ni1–Ni6). In addition to bulky isopropyl and tert-butyl substituents described in the original Brookhart’s work, complexes with different aryl ortho- and para-substituted α-diimine ligands, including the less sterically demanding methyl and ethyl substituents, are investigated. The 13C NMR spectra of the polymers have been assigned in detail, and some unique features have been identified and related to the chain-walking coordination/insertion mechani...
06 Dec 2018
TL;DR: The colloidal quantum dots (QDs) have inherent multiple dangling bonds (DBs) on the surface atoms due to the intrinsic weak bonding nature and steric hindrance of organic ligands as discussed by the authors.
Abstract: The colloidal quantum dots (QDs) have inherent multiple dangling bonds (DBs) on the surface atoms due to the intrinsic weak bonding nature and steric hindrance of organic ligands. Such DBs can be t...
TL;DR: These compounds are active catalysts for oxidative coupling of TEMPO and silane substrates, believed to proceed via metathesis of Bi-O and Si-H bonds followed by decomposition of bismuth-hydride intermediate species.