Topic
Stress corrosion cracking
About: Stress corrosion cracking is a research topic. Over the lifetime, 11340 publications have been published within this topic receiving 138157 citations.
Papers published on a yearly basis
Papers
More filters
TL;DR: In this article, the use of multi-phase rotating magnetic fields in the remote region of the probe as a possible SCC detection mechanism is described and a prototype pig and test rig are given and the challenges associated with the finite element modeling of the device are discussed.
60 citations
TL;DR: In this paper, an electrochemical impedance spectroscopy (EIS) technique was used to investigate the development of stress corrosion cracking (SCC) in X70 pipeline steels.
60 citations
TL;DR: In this paper, the effect of surface condition on crack initiation in 316L stainless steel during laboratory testing in sour (H2S) environments for oil and gas applications has been investigated using the four-point bend test method.
60 citations
TL;DR: In this article, the effect of irradiation on the stress corrosion cracking propensity of austenitic alloys in high-temperature water has been investigated, and the mechanism of IASCC is more likely due to t...
Abstract: Irradiation has a profound effect on the stress corrosion cracking propensity of austenitic alloys in high-temperature water. Irradiation-assisted stress corrosion cracking (IASCC) has been well documented both in the laboratory and in service over the past two decades. Numerous studies have shown that the degree of intergranular stress corrosion cracking increases with dose. However, the microstructure is simultaneously changing in several ways (dislocation loops, voids, segregation and hardening) and, not surprisingly, they all correlate with increased cracking susceptibility. As a consequence of their simultaneous development, the attribution of IASCC to one or more of these features has been difficult to establish. Mechanisms based on each of the principal effects of irradiation in the alloy are considered. Arguments can be made in support of any one of these features as the cause of IASCC, but substantial evidence exists to refute a first order correlation. The mechanism of IASCC is more likely due t...
60 citations
Book•
01 Jan 1972
TL;DR: In this article, stress corrosion testing with Precracked Specimens was performed on high strength steels and high strength aluminum alloys, including Titanium alloys. And the results showed that they were stable.
Abstract: : Contents: Fundamentals; Stress Corrosion testing with Precracked Specimens; High Strength Steels; High Strength Aluminum alloys; Titanium alloys.
60 citations