Topic
Styrene-butadiene
About: Styrene-butadiene is a research topic. Over the lifetime, 5568 publications have been published within this topic receiving 62099 citations. The topic is also known as: styrene-butadiene rubber & SBR.
Papers published on a yearly basis
Papers
More filters
••
TL;DR: In this article, mesoporous silica-reduced graphene oxide (mSiO2@rGO) hybrid nanosheets with sandwich structure were used for thermal conductivity enhancement.
36 citations
••
TL;DR: Hybrid nanocomposites of styrene butadiene rubber (SBR) with nanostructured fly-ash (NFA) were prepared in the laboratory by melt blending technique in an internal mixer as mentioned in this paper.
Abstract: Hybrid nanocomposites of styrene butadiene rubber (SBR) with nanostructured fly-ash (NFA) were prepared in the laboratory by melt blending technique in an internal mixer. Curatives were added on a laboratory two-roll mill. Curing characteristics as well as physicomechanical properties of the composites were evaluated. A comparison on SBR composites filled with fresh fly-ash (FFA); carbon black (CB) and precipitated silica (PS) has been reported. In general, SBR-NFA composites exhibit higher state of cure and higher strength properties as compared with HAF black-filled and fresh fly-ash-filled SBR composites at equivalent loadings. This may be attributed to the higher reinforcing ability of NFA. This fact has also been supported by the swelling studies and Kraus’ plot. Tear strength and abrasion resistance of the SBR-NFA composites were superior to FFA-filled and precipitated silica-filled vulcanizates, but were inferior to carbon black- filled SBR vulcanizates. The SBR-NFA composites showed lower hardness as compared with both the carbon blackfilled and silica-filled composites. Transmission electron microscopy and scanning probe microscopy studies revealed that the NFA particles are well dispersed in the SBR matrix. These results were further supported by fracture surface analysis under the SEM, which revealed the role of NFA in the prevention of fracture propagation. POLYM. COMPOS., 30:1647–1656, 2009. a 2008 Society of Plastics Engineers
36 citations
••
TL;DR: In this paper, the effects of reducing short-term aging temperature by additives on performance of SBRMA and its mixture were investigated through physical, rheological, morphological and mechanical analyses.
36 citations
••
TL;DR: In this paper, the authors investigated the effect of styrene butadiene rubber latex (SBRL) content on the gel content, tensile strength and thermal stability of copolymer films.
36 citations
••
TL;DR: Carbon nanotubes (CNTs) having three different lengths of 5, 30, and 100μm were added to silica-filled styrene butadiene rubber (SBR) compounds in order to investigate the effect of the CNT addition on the dynamic and electrical properties as mentioned in this paper.
36 citations