scispace - formally typeset
Search or ask a question
Topic

Subcarrier multiplexing

About: Subcarrier multiplexing is a research topic. Over the lifetime, 1118 publications have been published within this topic receiving 25069 citations. The topic is also known as: SCMA & subcarrier multiple access.


Papers
More filters
Book
01 Jan 1992
TL;DR: In this article, the authors present an overview of the main components of WDM lightwave communication systems, including the following: 1.1 Geometrical-Optics Description, 2.2 Wave Propagation, 3.3 Dispersion in Single-Mode Fibers, 4.4 Dispersion-Induced Limitations.
Abstract: Preface. 1 Introduction. 1.1 Historical Perspective. 1.2 Basic Concepts. 1.3 Optical Communication Systems. 1.4 Lightwave System Components. Problems. References. 2 Optical Fibers. 2.1 Geometrical-Optics Description. 2.2 Wave Propagation. 2.3 Dispersion in Single-Mode Fibers. 2.4 Dispersion-Induced Limitations. 2.5 Fiber Losses. 2.6 Nonlinear Optical Effects. 2.7 Fiber Design and Fabrication. Problems. References. 3 Optical Transmitters. 3.1 Semiconductor Laser Physics. 3.2 Single-Mode Semiconductor Lasers. 3.3 Laser Characteristics. 3.4 Optical Signal Generation. 3.5 Light-Emitting Diodes. 3.6 Transmitter Design. Problems. References. 4 Optical Receivers. 4.1 Basic Concepts. 4.2 Common Photodetectors. 4.3 Receiver Design. 4.4 Receiver Noise. 4.5 Coherent Detection. 4.6 Receiver Sensitivity. 4.7 Sensitivity Degradation. 4.8 Receiver Performance. Problems. References. 5 Lightwave Systems. 5.1 System Architectures. 5.2 Design Guidelines. 5.3 Long-Haul Systems. 5.4 Sources of Power Penalty. 5.5 Forward Error Correction. 5.6 Computer-Aided Design. Problems. References. 6 Multichannel Systems. 6.1 WDM Lightwave Systems. 6.2 WDM Components. 6.3 System Performance Issues. 6.4 Time-Division Multiplexing. 6.5 Subcarrier Multiplexing. 6.6 Code-Division Multiplexing. Problems. References. 7 Loss Management. 7.1 Compensation of Fiber Losses. 7.2 Erbium-Doped Fiber Amplifiers. 7.3 Raman Amplifiers. 7.4 Optical Signal-To-Noise Ratio. 7.5 Electrical Signal-To-Noise Ratio. 7.6 Receiver Sensitivity and Q Factor. 7.7 Role of Dispersive and Nonlinear Effects. 7.8 Periodically Amplified Lightwave Systems. Problems. References. 8 Dispersion Management. 8.1 Dispersion Problem and Its Solution. 8.2 Dispersion-Compensating Fibers. 8.3 Fiber Bragg Gratings. 8.4 Dispersion-Equalizing Filters. 8.5 Optical Phase Conjugation. 8.6 Channels at High Bit Rates. 8.7 Electronic Dispersion Compensation. Problems. References. 9 Control of Nonlinear Effects. 9.1 Impact of Fiber Nonlinearity. 9.2 Solitons in Optical Fibers. 9.3 Dispersion-Managed Solitons. 9.4 Pseudo-linear Lightwave Systems. 9.5 Control of Intrachannel Nonlinear Effects. Problems. References. 10 Advanced Lightwave Systems. 10.1 Advanced Modulation Formats. 10.2 Demodulation Schemes. 10.3 Shot Noise and Bit-Error Rate. 10.4 Sensitivity Degradation Mechanisms. 10.5 Impact of Nonlinear Effects. 10.6 Recent Progress. 10.7 Ultimate Channel Capacity. Problems. References. 11 Optical Signal Processing. 11.1 Nonlinear Techniques and Devices. 11.2 All-Optical Flip-Flops. 11.3 Wavelength Converters. 11.4 Ultrafast Optical Switching. 11.5 Optical Regenerators. Problems. References. A System of Units. B Acronyms. C General Formula for Pulse Broadening. D Software Package.

4,125 citations

Book
31 Aug 1994
TL;DR: The use of infrared radiation as a medium for high-speed short-range wireless digital communication, and several modification formats, including on-off keying (OOK), pulse-position modulation (PPM), and subcarrier modulation, are discussed.
Abstract: The use of infrared radiation as a medium for high-speed short-range wireless digital communication is discussed. Available infrared links and local-area networks are described. Advantages and drawbacks of the infrared medium are compared to those of radio and microwave media. The physical characteristics of infrared channels using intensity modulation with direct detection (IM/DD) are presented including path losses and multipath responses. Natural and artificial ambient infrared noise sources are characterized. Strategies for designs of transmitter and receivers that maximize link signal-to-noise ratio (SNR) are described. Several modification formats are discussed in detail, including on-off keying (OOK) pulse-position modulation (PPM), and subcarrier modulation. The performance of these techniques in the presence of multipath distortion is quantified. Techniques for multiplexing the transmissions of different users are reviewed. The performance of an experimental 50-Mb/s on-off-keyed diffuse infrared link is described.

2,972 citations

Journal ArticleDOI
TL;DR: The results of the DARPA Next Generation Internet (NGI) program in all-optical label swapping at University of California at Santa Barbara (UCSB) were reviewed in this article, where the overall network approach to encapsulate packets with optical labels and process forwarding and routing functions independent of packer bit rate and format.
Abstract: All-optical label swapping is a promising approach to ultra-high packet-rate routing and forwarding directly in the optical layer. In this paper, we review results of the DARPA Next Generation Internet program in all-optical label swapping at University of California at Santa Barbara (UCSB). We describe the overall network approach to encapsulate packets with optical labels and process forwarding and routing functions independent of packer bit rate and format. Various approaches to label coding using serial and subcarrier multiplexing addressing and the associated techniques for label erasure and rewriting, packet regeneration and packet-rate wavelength conversion are reviewed. These functions have been implemented using both fiber and semiconductor-based technologies and the ongoing effort at UCSB to integrate these functions is reported. We described experimental results for various components and label swapping functions and demonstration of 40 Gb/s optical label swapping. The advantages and disadvantages of using the various coding techniques and implementation technologies are discussed.

465 citations

Journal ArticleDOI
TL;DR: In this paper, a passive optical network (PON) based on a wavelength division multiplexing router, with modulators (instead of lasers) at the subscriber terminals, is demonstrated.
Abstract: We demonstrate a passive optical network (PON), based on a wavelength-division multiplexing router, with modulators (instead of lasers) at the subscriber terminals. A single, cost-shared, tunable laser is time-division multiplexed to provide bidirectional switched WDM services for N subscribers with independent formats and bit-rates for each. Simultaneous support of telephony and compressed digital video are presented in which RF subcarrier multiplexing is used to provide service segregation and resolve upstream packet contention. >

336 citations

Journal ArticleDOI
TL;DR: Optical Orthogonal frequency division multiplexing (OOFDM) is shown to outperform RZ-OOK transmission in high-speed optical communications systems in terms of transmission distance and spectral efficiency.
Abstract: Optical Orthogonal frequency division multiplexing (OOFDM) is shown to outperform RZ-OOK transmission in high-speed optical communications systems in terms of transmission distance and spectral efficiency. The OOFDM in combination with the subcarrier multiplexing offers a significant improvement in spectral efficiency of at least 2.9 bits/s/Hz.

326 citations


Network Information
Related Topics (5)
Optical fiber
167K papers, 1.8M citations
85% related
Semiconductor laser theory
38.5K papers, 713.7K citations
84% related
Transmission (telecommunications)
171.3K papers, 1.2M citations
83% related
Photonics
37.9K papers, 797.9K citations
82% related
Photonic crystal
43.4K papers, 887K citations
82% related
Performance
Metrics
No. of papers in the topic in previous years
YearPapers
20237
202219
202116
202022
201925
201818