Showing papers on "Tetrahydrofuran published in 2021"

Diastereoselective and Stereodivergent Synthesis of 2-Cinnamylpyrrolines Enabled by Photoredox-Catalyzed Iminoalkenylation of Alkenes.

Abstract: A photoredox-catalyzed iminoalkenylation of γ-alkenyl O-acyl oximes has been developed. Readily available alkenylboronic acids serve as alkenylation reagents, leading to densely functionalized pyrrolines. Both (E)- and (Z)-cinnamylpyrrolines are accessible depending on the reaction solvent. In dichloromethane, (E)-cinnamylpyrrolines are produced through a photoredox-mediated single-electron-transfer process. In tetrahydrofuran, (Z)-cinnamylpyrrolines are generated by photocatalytic contra-thermodynamic E-to-Z isomerization of (E)-cinnamylpyrrolines though an energy-transfer pathway. Two stereocenters are established with complete diastereoselectivity and only one diastereomer is isolated.

Factors Influencing Preferential Anion Interactions during Solvation of Multivalent Cations in Ethereal Solvents

Abstract: Most multivalent secondary batteries have employed electrolytes composed of cyclic ether solvents such as tetrahydrofuran or linear glycol ether solvents (glymes) such as 1,2-dimethoxyethane (G1). ...

A Proton-Responsive Pyridyl(benzamide)-Functionalized NHC Ligand on Ir Complex for Alkylation of Ketones and Secondary Alcohols.

Abstract: A Cp*Ir(III) complex ( 1 ) of a newly designed ligand L 1 featuring a proton-responsive pyridyl(benzamide) appended on N - heterocyclic carbene (NHC) has been synthesized. The molecular structure of 1 reveals a dearomatized form of the ligand. The protonation of 1 with HBF 4 in tetrahydrofuran gives the corresponding aromatized complex [Cp*Ir(L 1 H)Cl]BF 4 ( 2 ). Both compounds are characterized spectroscopically and by X-ray crystallography. The protonation of 1 with acid is examined by 1 H NMR and UV-vis spectra. The proton-responsive character of 1 is exploited for catalyzing α -alkylation of ketones and β -alkylation of secondary alcohols using primary alcohols as alkylating agents through hydrogen-borrowing methodology. Compound 1 is an effective catalyst for these reactions and exhibits a superior activity in comparison to a structurally similar iridium complex [Cp*Ir(L 2 )Cl]PF 6 ( 3 ) lacking a proton-responsive pendant amide moiety. The catalytic alkylation is characterized by a wide substrate scope, low catalyst and base loadings, and short reaction time. The catalytic efficacy of 1 is also demonstrated for the syntheses of quinoline and lactone derivatives via acceptorless dehydrogenation, and selective alkylation of two steroids, pregnenolone and testosterone. Detailed mechanistic investigations and DFT calculations substantiates the role of the proton-responsive ligand in the hydrogen-borrowing process.

Recycling Polyurethanes through Transcarbamoylation.

Abstract: In this paper, we describe a new strategy to recycle polyurethanes (PUs) using base-catalyzed transcarbamoylation. PUs were depolymerized qualitatively in the presence of MeOH (methanol)/tetrahydrofuran as a solvent and tert-butoxide as a base catalyst. The resulting depolymerized mixture constituted by O-dimethylcarbamates and polyols can either be used as the starting material to synthesize new PUs with the transcarbamoylation approach or be purified to recover polyols and diisocyanates. The versatility and easy scaling-up of the experimental procedures and high depolymerization outcomes of the presented method make this strategy very attractive for PU recycling.

Solubility Temperature Dependence of Bio-Based Levulinic Acid, Furfural, and Hydroxymethylfurfural in Water, Nonpolar, Polar Aprotic and Protic Solvents

Abstract: Bio-based levulinic acid (LA), furfural (FF), and hydroxymethylfurfural (HMF) represent key chemical intermediates when biorefining biomass resources, i.e., either cellulose, glucose, hexoses, etc. (HMF/LA), or hemicellulose, xylose, and pentose (FF). Despite their importance, their online in situ detection by process analytical technologies (PATs), solubility, and its temperature dependence are seldom available. Herein, we report their solubility and temperature dependence by examining n-hexane, cyclohexane, benzene, toluene, 1,4-dioxane, diethyl ether, dichloromethane, tetrahydrofuran, ethyl acetate, acetone, dimethylformamide, acetonitrile, dimethyl sulfoxide, formic acid, n-butanol, n-propanol, ethanol, methanol, and water. These solvents were selected as they are the most common nonpolar, polar aprotic, and polar protic solvents. Fourier-transform infrared (FTIR) spectroscopy was applied as a fast, accurate, and sensitive method to the examined solutions or mixtures. The latter also enables operando monitoring of the investigated compounds in pressurized reactors. Selected temperatures investigated were chosen, as they are within typical operating ranges. The calculated thermodynamic data are vital for designing biorefinery process intensification, e.g., reaction yield optimization by selective compound extraction. In addition to extracting, upstream or downstream unit operations that can benefit from the results include dissolution, crystallization, and precipitation.

Pervaporative Dehydration of Organic Solvents Using High-Silica CHA-Type Zeolite Membrane.

Abstract: A high-silica chabazite (CHA) type zeolite membrane was prepared on the porous α-Al2O3 support tube by the secondary growth of seed particles. The dehydration performances of the membrane were determined using methanol, ethanol, 2-propanol, acetone, acetic acid, methyl ethyl ketone (MEK), tetrahydrofuran (THF), N,N-dimethylformamide (DMF), dimethyl sulfoxide (DMSO), and N-methyl-2-pyrolidone (NMP) at 303-373 K. As a result, the dehydration performances of the membrane were categorized to following three types: (1) 2-propanol, acetone, THF, and MEK; (2) ethanol and acetic acid; and (3) methanol, DMF, and DMSO, and NMP. The adsorption isotherms of water, methanol, ethanol, and 2-propanol were determined to discuss the influences of the organic solvents on the permeation and separation performances of the membrane. For 2-propanol, acetone, MEK, and THF solutions, the high permeation fluxes and separation factors were obtained because of the preferential adsorption of water due to molecular sieving. In contrast, the permeation fluxes and separation factors were relatively low for methanol, DMF, and DMSO, and NMP solutions. The lower dehydration performance for the methanol solution was due to the adsorption of methanol. The permeation fluxes for ethanol and acetic acid solution were ca. 1 kg m-2 h-1. The significantly low flux was attributed to the similar molecular diameter to the micropore size of CHA-type zeolite.

Experimental Characterization of Tetrahydrofuran Low-Temperature Oxidation Products Including Ketohydroperoxides and Highly Oxygenated Molecules

Abstract: The oxidation of tetrahydrofuran (THF) was carried out in a continuously jet-stirred tank reactor (JSR) at a total pressure of 10 atm, in fuel-lean conditions (equivalence ratio = 0.5), an initial fuel mole fraction of 5000 ppm, at a mean residence time of 2 s, and for temperatures ranging from 550 to 620 K. High-resolution mass spectrometry analyses was used to characterize low-temperature oxidation products of THF. MS analyses were performed using atmospheric pressure chemical ionizations in positive and negative modes. Both flow injection analyses and ultra-high-pressure liquid chromatography-MS/MS allowed characterizing a large set of chemicals including hydroperoxides and diols (C 4 H 8 O 3), ketohydroperoxides (C 4 H 6 O 4), and more oxygenated molecules (up to C 4 H 8 O 7) resulting from up to three oxygen molecules addition of on α and β THF radicals. The existence of-OH or-OOH groups in the products was confirmed by hydrogen-deuterium exchange using D 2 O. We detected 24 products with molecular weight of 40-168, not reported in previous studies. Simulations using the latest THF oxidation chemical kinetic reaction mechanism available from the literature were compared to the present measurements of ketohydroperoxides and other products of THF cool flame. The kinetic scheme represented well the present qualitative data.

Temperature and Solvent Effects on H2 Splitting and Hydricity: Ramifications on CO2 Hydrogenation by a Rhenium Pincer Catalyst

Abstract: The catalytic hydrogenation of carbon dioxide holds immense promise for applications in sustainable fuel synthesis and hydrogen storage. Mechanistic studies that connect thermodynamic parameters with the kinetics of catalysis can provide new understanding and guide predictive design of improved catalysts. Reported here are thermochemical and kinetic analyses of a new pincer-ligated rhenium complex (tBuPOCOP)Re(CO)2 (tBuPOCOP = 2,6-bis(di-tert-butylphosphinito)phenyl) that catalyzes CO2 hydrogenation to formate with faster rates at lower temperatures. Because the catalyst follows the prototypical "outer sphere" hydrogenation mechanism, comprehensive studies of temperature and solvent effects on the H2 splitting and hydride transfer steps are expected to be relevant to many other catalysts. Strikingly large entropy associated with cleavage of H2 results in a strong temperature dependence on the concentration of [(tBuPOCOP)Re(CO)2H]- present during catalysis, which is further impacted by changing the solvent from toluene to tetrahydrofuran to acetonitrile. New methods for determining the hydricity of metal hydrides and formate at temperatures other than 298 K are developed, providing insight into how temperature can influence the favorability of hydride transfer during catalysis. These thermochemical insights guided the selection of conditions for CO2 hydrogenation to formate with high activity (up to 364 h-1 at 1 atm or 3330 h-1 at 20 atm of 1:1 H2:CO2). In cases where hydride transfer is the highest individual kinetic barrier, entropic contributions to outer sphere H2 splitting lead to a unique temperature dependence: catalytic activity increases as temperature decreases in tetrahydrofuran (200-fold increase upon cooling from 50 to 0 °C) and toluene (4-fold increase upon cooling from 100 to 50 °C). Ramifications on catalyst structure-function relationships are discussed, including comparisons between "outer sphere" mechanisms and "metal-ligand cooperation" mechanisms.

Ketone Enolization with Sodium Hexamethyldisilazide: Solvent- and Substrate-Dependent E-Z Selectivity and Affiliated Mechanisms.

Abstract: Ketone enolization by sodium hexamethyldisilazide (NaHMDS) shows a marked solvent and substrate dependence. Enolization of 2-methyl-3-pentanone reveals E-Z selectivities in Et3N/toluene (20:1), methyl-t-butyl ether (MTBE, 10:1), N,N,N',N″,N″-pentamethyldiethylenetriamine (PMDTA)/toluene (8:1), TMEDA/toluene (4:1), diglyme (1:1), DME (1:22), and tetrahydrofuran (THF) (1:90). Control experiments show slow or nonexistent stereochemical equilibration in all solvents except THF. Enolate trapping with Me3SiCl/Et3N requires warming to -40 °C whereas Me3SiOTf reacts within seconds. In situ enolate trapping at -78 °C using preformed NaHMDS/Me3SiCl mixtures is effective in Et3N/toluene yet fails in THF by forming (Me3Si)3N. Rate studies show enolization via mono- and disolvated dimers in Et3N/toluene, disolvated dimers in TMEDA, trisolvated monomers in THF/toluene, and free ions with PMDTA. Density functional theory computations explore the selectivities via the E- and Z-based transition structures. Failures of theory-experiment correlations of ionic fragments were considerable even when isodesmic comparisons could have canceled electron correlation errors. Swapping 2-methyl-3-pentanone with a close isostere, 2-methylcyclohexanone, causes a fundamental change in the mechanism to a trisolvated-monomer-based enolization in THF.

Cu6- and Cu8-Cage Sil- and Germsesquioxanes: Synthetic and Structural Features, Oxidative Rearrangements, and Catalytic Activity.

Abstract: This study reports intriguing features in the self-assembly of cage copper(II) silsesquioxanes in the presence of air. Despite the wide variation of solvates used, a series of prismatic hexanuclear Cu6 cages (1-5) were assembled under mild conditions. In turn, syntheses at higher temperatures are accompanied by side reactions, leading to the oxidation of solvates (methanol, 1-butanol, and tetrahydrofuran). The oxidized solvent derivatives then specifically participate in the formation of copper silsesquioxane cages, allowing the isolation of several unusual Cu8-based (6 and 7) and Cu6-based (8) complexes. When 1,4-dioxane was applied as a reaction medium, deep rearrangements occurred (with a total elimination of silsesquioxane ligands), causing the formation of mononuclear copper(II) compounds bearing oxidized dioxane fragments (9 and 11) or a formate-driven 1D coordination polymer (10). Finally, a "directed" self-assembly of sil- and germsesquioxanes from copper acetate (or formate) resulted in the corresponding acetate (or formate) containing Cu6 cages (12 and 13) that were isolated in high yields. The structures of all of the products 1-13 were established by single-crystal X-ray diffraction, mainly based on the use of synchrotron radiation. Moreover, the catalytic activity of compounds 12 and 13 was evaluated toward the mild homogeneous oxidation of C5-C8 cycloalkanes with hydrogen peroxide to form a mixture of the corresponding cyclic alcohols and ketones.

Study on the selective hydrogenation of isophorone

Abstract: 3,3,5-Trimethylcyclohexanone (TMCH) is an important pharmaceutical intermediate and organic solvent, which has important industrial significance. The selective hydrogenation of isophorone was studied over noble metal (Pd/C, Pt/C, Ir/C, Ru/C, Pd/SiO2, Pt/SiO2, Ir/SiO2, Ru/SiO2), and non-noble metal (RANEY® Ni, RANEY® Co, RANEY® Cu, RANEY® Fe, Ni/SiO2, Co/SiO2, Cu/SiO2, Fe/SiO2) catalysts and using solvent-free and solvent based synthesis. The results show that the solvent has an important effect on the selectivity of TMCH. The selective hydrogenation of isophorone to TMCH can be influenced by the tetrahydrofuran solvent. The conversion of isophorone is 100%, and the yield of 3,3,5-trimethylcyclohexanone is 98.1% under RANEY® Ni and THF. The method was applied to the selective hydrogenation of isopropylidene acetone, benzylidene acetone and 6-methyl-5-ene-2-heptanone. The structures of the hydrogenation product target (4-methylpentan-2-one, 4-benzylbutan-2-one and 6-methyl-heptane-2-one) were characterized using 1H-NMR and 13C-NMR. The yields of 4-methylpentan-2-one, 4-benzylbutan-2-one and 6-methyl-heptane-2-one were 97.2%, 98.5% and 98.2%, respectively. The production cost can be reduced by using RANEY® metal instead of noble metal palladium. This method has good application prospects.

Metal-Organic Frameworks Derived from Calcium and Strontium Complexes of a Redox-Active Ligand.

Abstract: The reactions of monomeric [(dpp-Bian)M(thf)4] (M = Ca (1a), Sr (1b); dpp-Bian = 1,2-bis[(2,6-diisopropylphenyl)imino]acenaphthene) with 4,4'-bipyridyl (4,4'-bipy) proceed with electron transfer from dpp-Bian2- to 4,4'-bipy0 to afford calcium and strontium complexes containing simultaneously radical-anionic dpp-Bian- and 4,4'-bipy- ligands. In tetrahydrofuran (thf) the reactions result in 1D coordination polymers [{(dpp-Bian)M(4,4'-bipy)(thf)2}·4thf]n (M = Ca (2a), Sr (2b)), while in a thf/benzene mixture the reaction between 1a and 4,4'-bipy affords the 2D metal-organic framework [{(dpp-Bian)Ca(4,4'-bipy)2}·2thf·2C6H6]n (3). The structures of compounds 2a,b and 3 have been determined by single-crystal X-ray analyses. The presence of the ligand-localized unpaired electrons allows the use of ESR spectroscopy for characterization of the compounds 2a,b and 3. DFT calculations of model calcium complexes with the dpp-Bian, 4,4'-bipy, and thf ligands confirm the energetically favorable open-shell configurations of the molecules bearing the 4,4'-bipy fragments. The magnetic susceptibility measurements confirm the presence of two unpaired electrons per monomeric unit in 2a,b and 3. The thermal stability of compounds 2a,b and 3 was studied by thermogravimetric analysis (TGA). To the best of our knowledge, 3 is the first MOF simultaneously containing two different paramagnetic bridging ligands inside the framework.

Convenient Syntheses of Trivalent Uranium Halide Starting Materials without Uranium Metal

Abstract: Low-valent uranium coordination chemistry continues to rely heavily on access to trivalent starting materials, but these reagents are typically prepared from uranium turnings, which are becoming increasingly difficult to acquire. Here we report convenient syntheses of UI3(THF)4 (THF = tetrahydrofuran) and UBr3(THF)4 from UCl4, a more accessible uranium starting material that can be prepared from commercially available uranium oxides. UCl3(THF)2 (1), UBr3(THF)4 (2), and UI3(THF)4 (3) were prepared by single-pot reductions from UCl4 using KH and KC8 and converted to 2 or 3 by halide exchange with the corresponding Me3SiX (where X = Br or I). Reduction of UI4(Et2O)2 (4; Et2O = diethyl ether) and UI4(1,4-dioxane)2 (5) was also shown to cleanly yield 3. Complex 1 was also synthesized separately by the addition of anhydrous HCl to U(BH4)3(THF)2, which was prepared by thermal reduction of U(BH4)4. All three trivalent uranium halide complexes were isolated in high crystalline yields (typically 85-99%) and their formulations were confirmed by single-crystal X-ray diffraction, elemental analysis, and 1H NMR and IR spectroscopy. Elemental analysis conducted on triplicate samples of 1-3 exposed to vacuum for different time intervals revealed significant THF loss for all three complexes in as little as 15 min. Overall, these results offer expedient entry into low-valent uranium chemistry for researchers lacking access to uranium turnings.

Clathrate Hydrate Inhibition by Polyisocyanate with Diethylammonium Group.

Abstract: Polymers containing amide groups have been used as kinetic hydrate inhibitors (KHIs) The amide group has good performance for hydrate nucleus adsorption, resulting in inhibition of hydrate growth Polyisocyanates composed of an amide backbone can be KHI candidates; however, the use of polyisocyanates as KHIs has not yet been reported Herein, we prepared water-soluble poly[3-[[2-(diethylamino)ethyl]thio]-1-propyl isocyanate-ran-hexyl isocyanate] (P(DETPIC-ran-HIC)) to investigate the ability of polyisocyanates to inhibit hydrate formation In the tetrahydrofuran (THF) clathrate hydrate crystal growth inhibition tests, P(DETPIC-ran-HIC) showed better performance than the polyamide, poly(N-vinylpyrrolidone) (PVP)

Influence of metal ratio on alumina-supported CuPd catalysts for the production of tetrahydrofuran from succinic acid

Abstract: The present research studies the influence of metal ratio on the construction of γ-Al2O3 supported CuxPdy (x + y = 10 wt%) bimetallic catalysts for the hydrogenation of succinic acid (SA) to tetrahydrofuran (THF). Synergistic effects between Cu and Pd due to alloying formation are responsible for the enhanced activity of the bimetallic catalysts compared to the monometallic ones. The Cu-rich CuPd catalysts, particularly Cu8Pd2/γ-Al2O3 and Cu6Pd4/γ-Al2O3, have emerged as the best catalysts for the production of THF with yields of 85–90%. The key factor that distinguishes them from the rest is the presence of isolated Cu components which holds the potential for further reduction of the intermediate γ-butyrolactone while restraining the hydrogenolysis of SA to butyric acid over the Pd sites.