Topic
Thermal mass flow meter
About: Thermal mass flow meter is a research topic. Over the lifetime, 1759 publications have been published within this topic receiving 21878 citations.
Papers published on a yearly basis
Papers
More filters
•
27 Mar 2002TL;DR: In this paper, a flow measurement sensor has a heater resistance pattern on one side of a plate-shaped member, and a bypass passage in which the flow measurement element is disposed.
Abstract: A flow measurement sensor accurately outputs signals even when pulsation flow is generated at high engine speed and also when pulsation flow accompanying reverse flow is generated. The flow measurement sensor has a flow measurement element which has a heater resistance pattern on one side of a plate-shaped member, and a bypass passage in which the flow measurement element is disposed, a first outlet through which fluid flowing along the surface of the flow measurement element flows out, and a second outlet through which fluid flowing along the back side of the flow measurement element flows out. The second outlet is positioned at a different location from the first outlet.
9 citations
••
TL;DR: The Intelligent Molecular Flow Sensor (IMFS) as mentioned in this paper enables direct gas flow measurements in the transitional and molecular flow regimes as well as in the slip and continuum flow regimes, thereby enabling flow measurements at pressures ranging from vacuum through atmospheric.
Abstract: An intelligent molecular flow sensor (IMFS) [see Note (1) on next page] enables direct gas flow measurements in the transitional and molecular flow regimes, as well as in the slip and continuum flow regimes, thereby enabling flow measurements at pressures ranging from vacuum through atmospheric. The properties of this sensor are investigated, along with the sensor’s transitional operating ranges. The IMFS operates as a mass flow sensor (directly measures the mass flow) in the transitional and molecular flow regimes, and it operates as a volumetric flow sensor in the continuum and slip flow regimes. Understanding of these properties and ranges of operation are critical for demanding leak testing, sealed closure integrity testing and vacuum test applications.
9 citations
•
01 Nov 1973
TL;DR: In this article, a phase-locked loop and digital control system is used to compare the measured flow rate to the actual flow rate, using a print-out of the comparison as a measure of accuracy.
Abstract: Liquid is supplied to a meter test stand at a uniform pressure, and the flow through the meters on the stand automatically is directed to each of three receptacles in sequence at three different flow rates during each test cycle Level sensors in each receptacle actuate cycling controls and actuate sensing and recording components The latter components monitor the rate of flow registration of the meters on test and provide an accurate comparison by percent of the measured flow rate to the actual flow rate A high degree of accuracy is achieved through the use of a phase locked loop and digital control system which responds to the level sensing and cycling controls to provide a print-out of the comparison as a measure of accuracy of the meter at each such flow rate
9 citations
••
TL;DR: In this paper, a high-speed gamma-ray tomograph was used to evaluate the effect of blind-tee obstruction on the performance of a multiphase hydrocarbon flow measurement.
9 citations