About: Vibration is a(n) research topic. Over the lifetime, 80010 publication(s) have been published within this topic receiving 849339 citation(s).
01 Jan 1995-
Abstract: I. SINGLE-DEGREE-OF-FREEDOM SYSTEMS. 1. Equations of Motion, Problem Statement, and Solution Methods. Simple Structures. Single-Degree-of-Freedom System. Force-Displacement Relation. Damping Force. Equation of Motion: External Force. Mass-Spring-Damper System. Equation of Motion: Earthquake Excitation. Problem Statement and Element Forces. Combining Static and Dynamic Responses. Methods of Solution of the Differential Equation. Study of SDF Systems: Organization. Appendix 1: Stiffness Coefficients for a Flexural Element. 2. Free Vibration. Undamped Free Vibration. Viscously Damped Free Vibration. Energy in Free Vibration. Coulomb-Damped Free Vibration. 3. Response to Harmonic and Periodic Excitations. Viscously Damped Systems: Basic Results. Harmonic Vibration of Undamped Systems. Harmonic Vibration with Viscous Damping. Viscously Damped Systems: Applications. Response to Vibration Generator. Natural Frequency and Damping from Harmonic Tests. Force Transmission and Vibration Isolation. Response to Ground Motion and Vibration Isolation. Vibration-Measuring Instruments. Energy Dissipated in Viscous Damping. Equivalent Viscous Damping. Systems with Nonviscous Damping. Harmonic Vibration with Rate-Independent Damping. Harmonic Vibration with Coulomb Friction. Response to Periodic Excitation. Fourier Series Representation. Response to Periodic Force. Appendix 3: Four-Way Logarithmic Graph Paper. 4. Response to Arbitrary, Step, and Pulse Excitations.Response to Arbitrarily Time-Varying Forces. Response to Unit Impulse. Response to Arbitrary Force. Response to Step and Ramp Forces. Step Force. Ramp or Linearly Increasing Force. Step Force with Finite Rise Time. Response to Pulse Excitations. Solution Methods. Rectangular Pulse Force. Half-Cycle Sine Pulse Force. Symmetrical Triangular Pulse Force. Effects of Pulse Shape and Approximate Analysis for Short Pulses. Effects of Viscous Damping. Response to Ground Motion. 5. Numerical Evaluation of Dynamic Response. Time-Stepping Methods. Methods Based on Interpolation of Excitation. Central Difference Method. Newmark's Method. Stability and Computational Error. Analysis of Nonlinear Response: Central Difference Method. Analysis of Nonlinear Response: Newmark's Method. 6. Earthquake Response of Linear Systems. Earthquake Excitation. Equation of Motion. Response Quantities. Response History. Response Spectrum Concept. Deformation, Pseudo-Velocity, and Pseudo-Acceleration Response Spectra. Peak Structural Response from the Response Spectrum. Response Spectrum Characteristics. Elastic Design Spectrum. Comparison of Design ad Response Spectra. Distinction between Design and Response Spectra. Velocity and Acceleration Response Spectra. Appendix 6: El Centro, 1940 Ground Motion. 7. Earthquake Response of Inelastic Systems. Force-Deformation Relations. Normalized Yield Strength, Yield Strength Reduction Factor, and Ductility Factor. Equation of Motion and Controlling Parameters. Effects of Yielding. Response Spectrum for Yield Deformation and Yield Strength. Yield Strength and Deformation from the Response Spectrum. Yield Strength-Ductility Relation. Relative Effects of Yielding and Damping. Dissipated Energy. Energy Dissipation Devices. Inelastic Design Spectrum. Applications of the Design Spectrum. Comparison of Design and Response Spectra. 8. Generalized Single-Degree-of-Freedom Systems. Generalized SDF Systems. Rigid-Body Assemblages. Systems with Distributed Mass and Elasticity. Lumped-Mass System: Shear Building. Natural Vibration Frequency by Rayleigh's Method. Selection of Shape Function. Appendix 8: Inertia Forces for Rigid Bodies. II. MULTI-DEGREE-OF-FREEDOM SYSTEMS. 9. Equations of Motion, Problem Statement, and Solution Methods. Simple System: Two-Story Shear Building. General Approach for Linear Systems. Static Condensation. Planar or Symmetric-Plan Systems: Ground Motion. Unsymmetric-Plan Building: Ground Motion. Symmetric-Plan Buildings: Torsional Excitation. Multiple Support Excitation. Inelastic Systems. Problem Statement. Element Forces. Methods for Solving the Equations of Motion: Overview. 10. Free Vibration. Natural Vibration Frequencies and Modes. Systems without Damping. Natural Vibration Frequencies and Modes. Modal and Spectral Matrices. Orthogonality of Modes. Interpretation of Modal Orthogonality. Normalization of Modes. Modal Expansion of Displacements. Free Vibration Response. Solution of Free Vibration Equations: Undamped Systems. Free Vibration of Systems with Damping. Solution of Free Vibration Equations: Classically Damped Systems. Computation of Vibration Properties. Solution Methods for the Eigenvalue Problem. Rayleigh's Quotient. Inverse Vector Iteration Method. Vector Iteration with Shifts: Preferred Procedure. Transformation of kA A = ...w2mA A to the Standard Form. 11. Damping in Structures.Experimental Data and Recommended Modal Damping Ratios. Vibration Properties of Millikan Library Building. Estimating Modal Damping Ratios. Construction of Damping Matrix. Damping Matrix. Classical Damping Matrix. Nonclassical Damping Matrix. 12. Dynamic Analysis and Response of Linear Systems.Two-Degree-of-Freedom Systems. Analysis of Two-DOF Systems without Damping. Vibration Absorber or Tuned Mass Damper. Modal Analysis. Modal Equations for Undamped Systems. Modal Equations for Damped Systems. Displacement Response. Element Forces. Modal Analysis: Summary. Modal Response Contributions. Modal Expansion of Excitation Vector p (t) = s p(T). Modal Analysis for p (t) = s p(T). Modal Contribution Factors. Modal Responses and Required Number of Modes. Special Analysis Procedures. Static Correction Method. Mode Acceleration Superposition Method. Analysis of Nonclassically Damped Systems. 13. Earthquake Analysis of Linear Systems.Response History Analysis. Modal Analysis. Multistory Buildings with Symmetric Plan. Multistory Buildings with Unsymmetric Plan. Torsional Response of Symmetric-Plan Buildings. Response Analysis for Multiple Support Excitation. Structural Idealization and Earthquake Response. Response Spectrum Analysis. Peak Response from Earthquake Response Spectrum. Multistory Buildings with Symmetric Plan. Multistory Buildings with Unsymmetric Plan. 14. Reduction of Degrees of Freedom. Kinematic Constraints. Mass Lumping in Selected DOFs. Rayleigh-Ritz Method. Selection of Ritz Vectors. Dynamic Analysis Using Ritz Vectors. 15. Numerical Evaluation of Dynamic Response. Time-Stepping Methods. Analysis of Linear Systems with Nonclassical Damping. Analysis of Nonlinear Systems. 16. Systems with Distributed Mass and Elasticity. Equation of Undamped Motion: Applied Forces. Equation of Undamped Motion: Support Excitation. Natural Vibration Frequencies and Modes. Modal Orthogonality. Modal Analysis of Forced Dynamic Response. Earthquake Response History Analysis. Earthquake Response Spectrum Analysis. Difficulty in Analyzing Practical Systems. 17. Introduction to the Finite Element Method.Rayleigh-Ritz Method. Formulation Using Conservation of Energy. Formulation Using Virtual Work. Disadvantages of Rayleigh-Ritz Method. Finite Element Method. Finite Element Approximation. Analysis Procedure. Element Degrees of Freedom and Interpolation Function. Element Stiffness Matrix. Element Mass Matrix. Element (Applied) Force Vector. Comparison of Finite Element and Exact Solutions. Dynamic Analysis of Structural Continua. III. EARTHQUAKE RESPONSE AND DESIGN OF MULTISTORY BUILDINGS. 18. Earthquake Response of Linearly Elastic Buildings. Systems Analyzed, Design Spectrum, and Response Quantities. Influence of T 1 and r on Response. Modal Contribution Factors. Influence of T 1 on Higher-Mode Response. Influence of r on Higher-Mode Response. Heightwise Variation of Higher-Mode Response. How Many Modes to Include. 19. Earthquake Response of Inelastic Buildings. Allowable Ductility and Ductility Demand. Buildings with "Weak" or "Soft" First Story. Buildings Designed for Code Force Distribution. Limited Scope. Appendix 19: Properties of Multistory Buildings. 20. Earthquake Dynamics of Base-Isolated Buildings. Isolation Systems. Base-Isolated One-Story Buildings. Effectiveness of Base Isolation. Base-Isolated Multistory Buildings. Applications of Base Isolation. 21. Structural Dynamics in Building Codes. Building Codes and Structural Dynamics. International Building Code (United States), 2000. National Building Code of Canada, 1995. Mexico Federal District Code, 1993. Eurocode 8. Structural Dynamics in Building Codes. Evaluation of Building Codes. Base Shear. Story Shears and Equivalent Static Forces. Overturning Moments. Concluding Remarks. Appendix A: Frequency Domain Method of Response Analysis.Appendix B: Notation.Appendix C: Answers to Selected Problems.Index.
01 Jan 1928-
Abstract: Keywords: Probleme dynamique ; Vibration ; Propagation des ondes Reference Record created on 2004-09-07, modified on 2016-08-08
01 Mar 1998-The Shock and Vibration Digest
Abstract: This paper provides an overview of methods to detect, locate, and characterize damage in structural and mechanical systems by examining changes in measured vibration response. Research in vibration-based damage identification has been rapidly expanding over the last few years. The basic idea behind this technology is that modal parameters (notably frequencies, mode shapes, and modal damping) are functions of the physical properties of the structure (mass, damping, and stiffness). Therefore, changes in the physical properties will cause detectable changes in the modal properties. The motivation for the development of this technology is presented. The methods are categorized according to various criteria such as the level of damage detection provided, model-based versus non-model-based methods, and linear versus nonlinear methods. The methods are also described in general terms including difficulties associated with their implementation and their fidelity. Past, current, and future-planned applications of this technology to actual engineering systems are summarized. The paper concludes with a discussion of critical issues for future research in the area of vibration-based damage identification.
08 Mar 1991-Journal of Sound and Vibration
Abstract: A damage in a structure alters its dynamic characteristics. The change is characterized by changes in the eigenparameters, i.e., natural frequency, damping values and the mode shapes associated with each natural frequency. Considerable effort has been spent in obtaining a relationship between the changes in eigenparameters, the damage location and the damage size. Most of the emphasis has been on using the changes in the natural frequencies and the damping values to determine the location and the size of the damage. In this paper a new parameter called curvature mode shape is investigated as a possible candidate for identifying and locating damage in a structure. By using a cantilever and a simply supported analytical beam model, it is shown here that the absolute changes in the curvature mode shapes are localized in the region of damage and hence can be used to detect damage in a structure. The changes in the curvature mode shapes increase with increasing size of damage. This information can be used to obtain the amount of damage in the structure. Finite element analysis was used to obtain the displacement mode shapes of the two models. By using a central difference approximation, curvature mode shapes were then calculated from the displacement mode shapes.
01 Jan 1975-
Abstract: Part 1 Single-degree-of-freedom systems: overview of structural dynamics analysis of free vibrations response to harmonic loading response to periodic loading response to impulse loading responses to general dynamic loading - step by step methods, superposition methods generalized single degree-of-freedom systems. Part 2 Multi-degree-of-freedom systems: formulation of the MDOF equations of motion evaluation of structural-property matrices undamped free vibrations analysis of dynamic response using superposition vibration analysis by matrix iteration selection of dynamic degrees of freedom analysis of MDOF dynamic response - step by step methods variational formulation of the equations of motion. Part 3 Distributed parameter systems: partial differential equations of motion analysis of undamped free vibrations analysis if dynamic response. Part 4 Random vibrations: probability theory random processes stochastic response of linear SDOF systems stochastic response of non-linear MDOF systems. Part 5 Earthquake engineering: seismological background free-field surface ground motions deterministic structural response - including soil-structure interaction stochastic structural response.