Showing papers on "Wave power published in 2021"

ULF Wave Driven Radial Diffusion During Geomagnetic Storms:A Statistical Analysis of Van Allen Probes Observations

Abstract: The impact of radial diffusion in storm time radiation belt dynamics is well‐debated. In this study we quantify the changes and variability in radial diffusion coefficients during geomagnetic storms. A statistical analysis of Van Allen Probes data (2012–2019) is conducted to obtain measurements of the magnetic and electric power spectral densities for Ultra Low Frequency (ULF) waves, and corresponding radial diffusion coefficients. The results show global wave power enhancements occur during the storm main phase, and continue into the recovery phase. Local time asymmetries show sources of wave power are both external solar wind driving and internal sources from coupling with ring current ions and substorms. Wave power enhancements are also observed at low L values (L < 4). The accessibility of wave power to low L is attributed to a depression of the Alfven continuum. The increased wave power drives enhancements in both the magnetic and electric field diffusion coefficients by more than an order of magnitude. Significant variability in diffusion coefficients is observed, with values ranging over several orders of magnitude. A comparison to the Kp parameterized empirical model of Ozeke et al. (2014) is conducted and indicates important differences during storm times. Although the electric field diffusion coefficient is relatively well described by the empirical model, the magnetic field diffusion coefficient is approximately ∼10 times larger than predicted. We discuss how differences could be attributed to data set limitations and assumptions. Alternative storm‐time radial diffusion coefficients are provided as a function of L* and storm phase.

Evaluation of the Worldwide Wave Energy Distribution Based on ERA5 Data and Altimeter Measurements

Abstract: There is an increasing necessity in reducing CO2 emissions and implementing clean energy technologies, and over the years the marine environment has shown a huge potential in terms of renewable energy. From this perspective, extracting marine renewable energy represents one of the most important technological challenges of the 21st century. In this context, the objective of the present work is to provide a new and comprehensive understanding concerning the global wave energy resources based on the most recent results coming from two different databases, ERA5 and the European Space Agency Climate Change Initiative for Sea State. In this study, an analysis was first made based only on the ERA5 data and concerns the 30-year period of 1989–2018. The mean wave power, defined as the energy flux per unit of wave-crest length, was evaluated at this step. Besides the spatial distribution of this parameter, its seasonal, inter, and mean annual variability was also assessed on a global scale. As a second step, the mean wave energy density per unit horizontal area was analyzed for a 27-year period (1992–2018) with both ERA5 and the satellite data from the European Space Agency being considered. The comparison indicates a relatively good concordance between the results provided by the two databases in terms of mean wave energy density, although the satellite data indicate slightly higher energy values.

Wave power extraction from a hybrid oscillating water column-oscillating buoy wave energy converter

Abstract: Oscillating water column (OWC) devices and oscillating buoys (OBs) are two of the main types of wave energy converters (WECs). In this paper a hybrid oscillating water column-oscillating buoy wave energy converter is proposed, which we have named OWCOB. The oscillating buoy is hinged at the outer wall of the oscillating water column. As waves propagate through the OWCOB, the water column within the OWC chamber moves up and down, producing air flow to propel a turbine. Meanwhile, the oscillation of the OB drives a separate hydraulic system. To solve the wave diffraction and radiation problems of the OWCOB and investigate its energy capture performance, an analytical model is developed based on linear potential flow theory and the eigenfunction matching method. Assuming that the PTOs of the OWC and OB are both linear, the wave power extraction of the OWCOB is evaluated in the frequency domain. Of the two configurations considered, the OWCOB with the OWC opening waveward and the OB hinged leeward is found to have a broader primary frequency band of wave power capture compared to the OWCOB with the OWC opening and the OB on the same side. Further, a thorough sensitivity analysis of power capture is carried out considering the main design parameters (size and submergence of the OWC opening, distance between the OWC and the OB, OB hinge elevation, OB radius), which can form the basis of an optimization study for a particular wave climate. Importantly, we find that the OWCOB performs generally better than stand-alone OWCs and OBs, not least in terms of frequency bandwidth.

Experimental investigation on the hydrodynamic performance of a multi-chamber OWC-breakwater

Abstract: The multi-chamber Oscillating Water Column (OWC) device has recently become more attractive due to its potential high efficiency. In this paper, the hydrodynamic performance of a single-, dual- and triple-chamber OWC-breakwater are investigated experimentally. In the first instance, quantitative comparisons are implemented to understand the hydrodynamic performance of multi-chamber OWC-breakwaters. Specific attention has been dedicated to the hydrodynamic performance of capture width ratio (CWR), reflection coefficient, transmission coefficient, dissipation coefficient and effective frequency bandwidth. The investigation identified various findings that can be summarized as follows: i) hydrodynamic interactions between chambers in the multi-chamber OWC device has improved wave power extraction characteristics; ii) comparing with the conventional pontoon breakwater, the multi-chamber OWC-breakwater showed better wave attenuation performance in longer waves; iii) wave steepness is important for evaluating the performance of the multiple-chamber OWC-breakwater device; and iv) the implementation of the multi-chamber scheme broadens the effective frequency bandwidth (satisfied the condition of KT 0.2) of OWC-breakwater.

Hydrodynamic Efficiency of a Wave Energy Converter in Front of an Orthogonal Breakwater

Abstract: In the present study, the hydrodynamic efficiency of a cylindrical wave energy converter (WEC) of vertical symmetry axis and arranged in front of a reflecting orthogonal breakwater is explored. The idea is based on exploiting the anticipated amplification of the scattered and the reflected wave fields originating from the presence of the vertical walls, towards increasing the WEC’s wave power absorption due to the walls’ wave reflections. Two types of converters are examined, namely the heaving device and the oscillating water column (OWC) device, assuming linear potential theory. The associated diffraction-, motion-, and pressure-radiation problems are solved using axisymmetric eigenfunction expansions for the velocity potential around the WECs by properly accounting for the wave field’s modification due to the walls’ presence. To this end, a theoretical formulation dealing with the evaluation of the converter’s performance is presented accounting for the coupling between the WEC and the reflecting vertical walls. The results depict that the amount of the harvested wave power by the WEC in front of an orthogonal wall is amplified compared to the absorbed wave power by the same WEC in the open sea.

Wind–Wave Coupling Effect on the Dynamic Response of a Combined Wind–Wave Energy Converter

Abstract: There is a huge energy demand from offshore renewable energy resources. To maximize the use of various renewable energy sources, a combined floating energy system consisting of different types of energy devices is an ideal option to reduce the levelized cost of energy (LCOE) by sharing the infrastructure of the platform and enhancing the power production capacity. This study proposed a combined concept of energy systems by combing a heave-type wave energy converter (WEC) with a semisubmersible floating wind turbine. In order to investigate the power performance and dynamic response of the combined concept, coupled aero-hydro-servo-elastic analysis was carried out using the open-source code F2A, which is based on the coupling of the FAST and AQWA tools by integrating all the possible environmental loadings (e.g., aerodynamic, hydrodynamic). Numerical results obtained by AQWA are used to verify the accuracy of the coupled model in F2A in predicting dynamic responses of the combined system. The main hydrodynamic characteristics of the combined system under typical operational conditions were examined, and the calculated responses (motions, mooring line tension and produced wave power) are discussed. Additionally, the effect of aerodynamic damping on the dynamic response of the combined system was examined and presented. Moreover, a second fully coupled analysis model was developed, and its response predictions were compared with the predictions of the model developed with F2A in order for the differences of the calculated responses resulted by the different modeling techniques to be discussed and explained. Finally, the survivability of the combined concept has been examined for different possible proposed survival modes.

Multi-mode wave energy converter design optimisation using an improved moth flame optimisation algorithm

Abstract: Ocean renewable wave power is one of the more encouraging inexhaustible energy sources, with the potential to be exploited for nearly 337 GW worldwide. However, compared with other sources of renewables, wave energy technologies have not been fully developed, and the produced energy price is not as competitive as that of wind or solar renewable technologies. In order to commercialise ocean wave technologies, a wide range of optimisation methodologies have been proposed in the last decade. However, evaluations and comparisons of the performance of state-of-the-art bio-inspired optimisation algorithms have not been contemplated for wave energy converters’ optimisation. In this work, we conduct a comprehensive investigation, evaluation and comparison of the optimisation of the geometry, tether angles and power take-off (PTO) settings of a wave energy converter (WEC) using bio-inspired swarm-evolutionary optimisation algorithms based on a sample wave regime at a site in the Mediterranean Sea, in the west of Sicily, Italy. An improved version of a recent optimisation algorithm, called the Moth–Flame Optimiser (MFO), is also proposed for this application area. The results demonstrated that the proposed MFO can outperform other optimisation methods in maximising the total power harnessed from a WEC.

The Influence of Sizing of Wave Energy Converters on the Techno-Economic Performance

Abstract: Currently, the techno-economic performance of Wave Energy Converters (WECs) is not competitive with other renewable technologies. Size optimization could make a difference. However, the impact of sizing on the techno-economic performance of WECs still remains unclear, especially when sizing of the buoy and Power Take-Off (PTO) are considered collectively. In this paper, an optimization method for the buoy and PTO sizing is proposed for a generic heaving point absorber to reduce the Levelized Cost Of Energy (LCOE). Frequency domain modeling is used to calculate the power absorption of WECs with different buoy and PTO sizes. Force constraints are used to represent the effects of PTO sizing on the absorbed power, in which the passive and reactive control strategy are considered, respectively. A preliminary economic model is established to calculate the cost of WECs. The proposed method is implemented for three realistic sea sites, and the dependence of the optimal size of WECs on wave resources and control strategies is analyzed. The results show that PTO sizing has a limited effect on the buoy size determination, while it can reduce the LCOE by 24% to 31%. Besides, the higher mean wave power density of wave resources does not necessarily correspond to the larger optimal buoy or PTO sizes, but it contributes to the lower LCOE. In addition, the optimal PTO force limit converges at around 0.4 to 0.5 times the maximum required PTO force for the corresponding sea sites. Compared with other methods, this proposed method shows a better potential in sizing and reducing LCOE.