scispace - formally typeset
Search or ask a question

Showing papers on "Wavelength published in 2016"


Journal ArticleDOI
TL;DR: The ability of the anisotropic coding metasurfaces to generate a beam splitter and realize simultaneous anomalous reflections and polarization conversions, thus providing powerful control of differently polarized electromagnetic waves is demonstrated.
Abstract: Metamaterials based on effective media can be used to produce a number of unusual physical properties (for example, negative refraction and invisibility cloaking) because they can be tailored with effective medium parameters that do not occur in nature. Recently, the use of coding metamaterials has been suggested for the control of electromagnetic waves through the design of coding sequences using digital elements ‘0’ and ‘1,' which possess opposite phase responses. Here we propose the concept of an anisotropic coding metamaterial in which the coding behaviors in different directions are dependent on the polarization status of the electromagnetic waves. We experimentally demonstrate an ultrathin and flexible polarization-controlled anisotropic coding metasurface that functions in the terahertz regime using specially designed coding elements. By encoding the elements with elaborately designed coding sequences (both 1-bit and 2-bit sequences), the x- and y-polarized waves can be anomalously reflected or independently diffused in three dimensions. The simulated far-field scattering patterns and near-field distributions are presented to illustrate the dual-functional performance of the encoded metasurface, and the results are consistent with the measured results. We further demonstrate the ability of the anisotropic coding metasurfaces to generate a beam splitter and realize simultaneous anomalous reflections and polarization conversions, thus providing powerful control of differently polarized electromagnetic waves. The proposed method enables versatile beam behaviors under orthogonal polarizations using a single metasurface and has the potential for use in the development of interesting terahertz devices. An artificial material that controls electromagnetic waves of different polarization independently has been demonstrated by a team in China. Tie Jun Cui from the Southeast University and co-workers have created a metamaterial that can, for example, split incoming unpolarized radiation so that horizontally polarized light goes one way while vertically polarized light goes the other. Metamaterials are structures that can be engineered to have optical properties not found in natural materials, and they consist of a repeated pattern of elements that are smaller than the wavelength of light. The researchers used two types of element, simple squares and dumbbells, which enabled them to independently control beams of long-wavelength radiation known as terahertz waves having differing polarizations. By reducing the size of the metamaterial elements, the same idea could also be applied to visible light.

382 citations


01 Jan 2016
TL;DR: The only reasonable correction method for an absorption meter without attenuation measurements or a spectrophotometer is the method in which the measured absorption at a wavelength in the near infrared is subtracted as mentioned in this paper.
Abstract: In this paper we examine correction methods for the scattering error of reflecting tube absorption meters and spectrophotometers. We model the scattering error of reflecting tube absorption meters for different tube parameters and different inherent optical properties. We show that the only reasonable correction method for an absorption meter without attenuation measurements or a spectrophotometer is the method in which the measured absorption at a wavelength in the near infrared is subtracted. A better correction is obtained if attenuation is measured simultaneously and the absorption at the reference wavelength is multiplied by the ratio of the measured scattering at the measurement wavelength divided by the measured scattering coefficient at the reference wavelength. This is the proportional method. We showed that the important geometrical parameters of the reflecting tube can be obtained by a comparison of measurements and models of polystyrene beads. Finally we examine the improvements that could be obtained if a direct scattering measurement were made simultaneously with the absorption and attenuation measurements.

282 citations


Journal ArticleDOI
TL;DR: Temperature-dependent results are well described by a lattice vibration model that considers piezoelectric coupling to in-plane phonons and polarization spectroscopy measurements suggest that whereas the 575 nm emission line is directly excited by 532 nm excitation, the 682 nm line is excited indirectly.
Abstract: We investigate the distribution and temperature-dependent optical properties of sharp, zero-phonon emission from defect-based single photon sources in multilayer hexagonal boron nitride (h-BN) flakes. We observe sharp emission lines from optically active defects distributed across an energy range that exceeds 500 meV. Spectrally resolved photon-correlation measurements verify single photon emission, even when multiple emission lines are simultaneously excited within the same h-BN flake. We also present a detailed study of the temperature-dependent line width, spectral energy shift, and intensity for two different zero-phonon lines centered at 575 and 682 nm, which reveals a nearly identical temperature dependence despite a large difference in transition energy. Our temperature-dependent results are well described by a lattice vibration model that considers piezoelectric coupling to in-plane phonons. Finally, polarization spectroscopy measurements suggest that whereas the 575 nm emission line is directly e...

273 citations


Journal ArticleDOI
TL;DR: The thesis that resonances in trees result in forests acting as locally resonant metamaterials for Rayleigh surface waves in the geophysics context is explored and bandgaps generated by the coupling of the successive longitudinal resonances of trees with the vertical component of the Rayleigh wave are explored.
Abstract: We explore the thesis that resonances in trees result in forests acting as locally resonant metamaterials for Rayleigh surface waves in the geophysics context. A geophysical experiment demonstrates that a Rayleigh wave, propagating in soft sedimentary soil at frequencies lower than 150 Hz, experiences strong attenuation, when interacting with a forest, over two separate large frequency bands. This experiment is interpreted using finite element simulations that demonstrate the observed attenuation is due to bandgaps when the trees are arranged at the sub-wavelength scale with respect to the incident Rayleigh wave. The repetitive bandgaps are generated by the coupling of the successive longitudinal resonances of trees with the vertical component of the Rayleigh wave. For wavelengths down to 5 meters, the resulting bandgaps are remarkably large and strongly attenuating when the acoustic impedance of the trees matches the impedance of the soil. Since longitudinal resonances of a vertical resonator are inversely proportional to its length, a man-made engineered array of resonators that attenuates Rayleigh waves at frequency ≤10 Hz could be designed starting from vertical pillars coupled to the ground with longitudinal resonance ≤10 Hz.

259 citations


Journal ArticleDOI
TL;DR: The first experimental demonstration of multiple geometric parametric instability sidebands, generated in the frequency domain through resonant space-time coupling, owing to the natural periodic spatial self-imaging of a multimode quasi-continuous-wave beam in a standard graded-index multimode fiber is presented.
Abstract: Spatiotemporal mode coupling in highly multimode physical systems permits new routes for exploring complex instabilities and forming coherent wave structures. We present here the first experimental demonstration of multiple geometric parametric instability sidebands, generated in the frequency domain through resonant space-time coupling, owing to the natural periodic spatial self-imaging of a multimode quasi-continuous-wave beam in a standard graded-index multimode fiber. The input beam was launched in the fiber by means of an amplified microchip laser emitting sub-ns pulses at 1064 nm. The experimentally observed frequency spacing among sidebands agrees well with analytical predictions and numerical simulations. The first-order peaks are located at the considerably large detuning of 123.5 THz from the pump. These results open the remarkable possibility to convert a near-infrared laser directly into a broad spectral range spanning visible and infrared wavelengths, by means of a single resonant parametric nonlinear effect occurring in the normal dispersion regime. As further evidence of our strong space-time coupling regime, we observed the striking effect that all of the different sideband peaks were carried by a well-defined and stable bell-shaped spatial profile.

242 citations


Journal ArticleDOI
TL;DR: In this paper, the hydrodynamic performance of a fixed Oscillating Water Column (OWC) wave energy device under various wave conditions and geometric parameters was tested experimentally in a wave flume.

187 citations


Journal ArticleDOI
TL;DR: Off-axis meta-lenses that simultaneously focus and disperse light of different wavelengths with unprecedented spectral resolution are demonstrated that have significant potential for emerging portable/wearable optics technology.
Abstract: Metasurfaces have opened a new frontier in the miniaturization of optical technology by allowing exceptional control over the wavefront. Here, we demonstrate off-axis meta-lenses that simultaneously focus and disperse light of different wavelengths with unprecedented spectral resolution. They are designed based on the geometric phase via rotated silicon nanofins and can focus light at angles as large as 80°. Due to the large angle focusing, these meta-lenses have superdispersive characteristics (0.27 nm/mrad) that make them capable of resolving wavelength differences as small as 200 pm in the telecom region. In addition, by stitching several meta-lenses together, we maintain a high spectral resolution for a wider wavelength range. The meta-lenses have measured efficiencies as high as 90% in the wavelength range of 1.1 to 1.6 μm. The planar and compact configuration together with high spectral resolution of these meta-lenses has significant potential for emerging portable/wearable optics technology.

175 citations


Journal ArticleDOI
TL;DR: The shielding performance of a metabarrier is investigated in a scaled experimental model and surface ground motion can be reduced up to 50% in frequency regions below 10 Hz, relevant for the protection of buildings and civil infrastructures.
Abstract: Resonant metamaterials have been proposed to reflect or redirect elastic waves at different length scales, ranging from thermal vibrations to seismic excitation. However, for seismic excitation, where energy is mostly carried by surface waves, energy reflection and redirection might lead to harming surrounding regions. Here, we propose a seismic metabarrier able to convert seismic Rayleigh waves into shear bulk waves that propagate away from the soil surface. The metabarrier is realized by burying sub-wavelength resonant structures under the soil surface. Each resonant structure consists of a cylindrical mass suspended by elastomeric springs within a concrete case and can be tuned to the resonance frequency of interest. The design allows controlling seismic waves with wavelengths from 10-to-100 m with meter-sized resonant structures. We develop an analytical model based on effective medium theory able to capture the mode conversion mechanism. The model is used to guide the design of metabarriers for varying soil conditions and validated using finite-element simulations. We investigate the shielding performance of a metabarrier in a scaled experimental model and demonstrate that surface ground motion can be reduced up to 50% in frequency regions below 10 Hz, relevant for the protection of buildings and civil infrastructures.

174 citations


Journal ArticleDOI
TL;DR: In this article, the authors demonstrate site-resolved imaging of individual bosonic atoms in a Hubbard-regime two-dimensional optical lattice with a short lattice constant of 266 nm.
Abstract: We demonstrate site-resolved imaging of individual bosonic atoms in a Hubbard-regime two-dimensional optical lattice with a short lattice constant of 266 nm. To suppress the heating by probe light with the 1S0–1P1 transition of the wavelength λ = 399 nm for high-resolution imaging and preserve atoms at the same lattice sites during the fluorescence imaging, we simultaneously cool atoms by additionally applying narrow-line optical molasses with the 1S0–3P1 transition of the wavelength λ = 556 nm. We achieve a low temperature of , corresponding to a mean oscillation quantum number along the horizontal axes of 0.22(4) during the imaging process. We detect, on average, 200 fluorescence photons from a single atom within a 400 ms exposure time, and estimate a detection fidelity of 87(2)%. The realization of a quantum gas microscope with enough fidelity for Yb atoms in a Hubbard-regime optical lattice opens up the possibilities for studying various kinds of quantum many-body systems such as Bose and Fermi gases, and their mixtures, and also long-range-interacting systems such as Rydberg states.

118 citations


Journal ArticleDOI
TL;DR: The description of the atomic cloud by a mean-field model based on the Lorentz-Lorenz formula that ignores scattering events where light is scattered recurrently by the same atom and by a microscopic discrete dipole model that incorporates these effects lead to progressively closer agreement with the observations, despite remaining differences.
Abstract: We measure the coherent scattering of light by a cloud of laser-cooled atoms with a size comparable to the wavelength of light. By interfering a laser beam tuned near an atomic resonance with the field scattered by the atoms, we observe a resonance with a redshift, a broadening, and a saturation of the extinction for increasing atom numbers. We attribute these features to enhanced light-induced dipole-dipole interactions in a cold, dense atomic ensemble that result in a failure of standard predictions such as the “cooperative Lamb shift”. The description of the atomic cloud by a mean-field model based on the Lorentz-Lorenz formula that ignores scattering events where light is scattered recurrently by the same atom and by a microscopic discrete dipole model that incorporates these effects lead to progressively closer agreement with the observations, despite remaining differences

112 citations


Journal ArticleDOI
TL;DR: In this article, a hollow core periodic sandwich structure with added local resonant structures is proposed for low-frequency bands, which can be applied to combine light weight, compact volume and good acoustic behaviour.

Journal ArticleDOI
TL;DR: This work reports the experimental observation of Snell's law for magnetostatic spin waves in thin ferromagnetic Permalloy films by imaging incident, refracted, and reflected waves and shows that the thickness step modifies the wavelength and the amplitude of the incident waves.
Abstract: We report the experimental observation of Snell's law for magnetostatic spin waves in thin ferromagnetic Permalloy films by imaging incident, refracted, and reflected waves. We use a thickness step as the interface between two media with different dispersion relations. Since the dispersion relation for magnetostatic waves in thin ferromagnetic films is anisotropic, deviations from the isotropic Snell's law known in optics are observed for incidence angles larger than 25° with respect to the interface normal between the two magnetic media. Furthermore, we can show that the thickness step modifies the wavelength and the amplitude of the incident waves. Our findings open up a new way of spin wave steering for magnonic applications.

Journal ArticleDOI
TL;DR: In this paper, a model was developed to solve nonlinear Maxwell's equations coupled with multiple rate free carrier density equations in the presence of randomly distributed inhomogeneities in fused silica, where conduction band electron density is shown to form nanoplanes elongated perpendicular to the laser polarization.
Abstract: Femtosecond laser-induced volume nanograting formation is numerically investigated. The developed model solves nonlinear Maxwell's equations coupled with multiple rate free carrier density equations in the presence of randomly distributed inhomogeneities in fused silica. As a result of the performed calculations, conduction band electron density is shown to form nanoplanes elongated perpendicular to the laser polarization. Two types of nanoplanes are identified. The structures of the first type have a characteristic period of the laser wavelength in glass and are attributed to the interference of the incident and the inhomogeneity-scattered light waves. Field components induced by coherent multiple scattering in directions perpendicular to the laser polarization are shown to be responsible for the formation of the second type of structures with a subwavelength periodicity. In this case, the influence of the inhomogeneity concentration on the period of nanoplanes is shown. The calculation results not only help to identify the physical origin of the self-organized nanogratings, but also explain their period and orientation.

Journal ArticleDOI
TL;DR: In this article, a new configuration of interference based OR, XOR, NOT and AND optical logic gates on a two dimensional square lattice photonic crystal (PhC) platform was proposed.
Abstract: We propose a new configuration of interference based OR, XOR, NOT and AND optical logic gates on a two dimensional square lattice photonic crystal (PhC) platform. The working of these devices was analyzed by the FDTD method and the operating frequency range was explored using the plane wave expansion method. The XOR and NOT gates have high contrast ratio which is more than 35 dB between high and low logic states, for a particular wavelength. All these devices are operating with multiple wavelengths. The impact of structural parameter like radius on the operating wavelength and Contrast Ratio (CR) was analyzed. It is found that the optimization of structural parameters makes it possible to obtain the operating wavelength allowed by band structure. These proposed devices were made up of linear waveguides and square ring resonator waveguides, without using nonlinear materials, optical amplifiers and external phase shifters.

Journal ArticleDOI
TL;DR: The design and experimental realization of a novel V-shaped all-dielectric antenna based on high-index amorphous silicon with a strong magnetic dipole resonance in the visible range is presented and it is shown that the silicon-based antennas demonstrate stronger magnetic scattering with minimal absorption losses.
Abstract: An optical antenna forms the subwavelength bridge between free space optical radiation and localized electromagnetic energy. Its localized electromagnetic modes strongly depend on its geometry and material composition. Here, we present the design and experimental realization of a novel V-shaped all-dielectric antenna based on high-index amorphous silicon with a strong magnetic dipole resonance in the visible range. As a result, it exhibits extraordinary bidirectional scattering into diametrically opposite directions. The scattering direction is effectively controlled by the incident wavelength, rendering the antenna a passive bidirectional wavelength router. A detailed multipole decomposition analysis reveals that the excitation and abrupt phase change of an out-of-plane polarized magnetic dipole and an in-plane electric quadrupole are essential for the directivity switching. Previously, noble metals have been extensively exploited for plasmonic directional nanoantenna design. However, these inevitably su...

Journal ArticleDOI
TL;DR: In this article, the authors used two interfering beams of a Yb:YAG-Laser with 515-nm wavelength and a pulse duration of 35-ps and a laser fluence of 0.1-J/cm 2.

Journal ArticleDOI
TL;DR: A double-wavelength metasurface based on polarization dependent dielectric meta-atoms that control the phases of two orthogonal polarizations independently is proposed and demonstrated.
Abstract: Metasurfaces are ultrathin optical structures that manipulate optical wavefronts. Most metasurface devices which deflect light are designed for operation at a single wavelength, and their function changes as the wavelength is varied. Here we propose and demonstrate a double-wavelength metasurface based on polarization dependent dielectric meta-atoms that control the phases of two orthogonal polarizations independently. Using this platform, we design lenses that focus light at 915 and 780 nm with perpendicular linear polarizations to the same focal distance. Lenses with numerical apertures up to 0.7 and efficiencies from 65% to above 90% are demonstrated. In addition to the high efficiency and numerical aperture, an important feature of this technique is that the two operation wavelengths can be chosen to be arbitrarily close. These characteristics make these lenses especially attractive for fluorescence microscopy applications.

Journal ArticleDOI
TL;DR: In this paper, a Fourier-transform spectrometer chip based on the principle of spatial heterodyning implemented in the silicon-on-insulator waveguide platform, and operating near 3.75-μm wavelength was demonstrated.
Abstract: Mid-infrared absorption spectroscopy is highly relevant for a wide range of sensing applications. In this letter, we demonstrate a Fourier-transform spectrometer chip based on the principle of spatial heterodyning implemented in the silicon-on-insulator waveguide platform, and operating near 3.75- $\mu \text{m}$ wavelength. The spectrometer comprises a waveguide splitting tree feeding to an array of 42 Mach–Zehnder interferometers with linearly increasing optical path length differences. A spectral retrieval algorithm based on calibration matrices is applied to the stationary output pattern of the array, compensating for any phase and amplitude errors arising from fabrication imperfections. A spectral resolution below 3 nm is experimentally demonstrated.

Journal ArticleDOI
TL;DR: In this article, the average length between the positive and negative peak fields is 9 λD, comparable to the average half wavelength of electrostatic waves and the length scales and potentials of the ESWs are consistent with predictions for stable electron holes.
Abstract: Electrostatic solitary waves (ESWs) are characterized by localized bipolar electric fields parallel to the magnetic field and are frequently observed in space plasmas. In this paper a study of ESWs and field-aligned electrostatic waves, which do not exhibit localized bipolar fields, near the magnetopause is presented using the Cluster spacecraft. The speeds, length scales, field strengths, and potentials are calculated and compared with the local plasma conditions. A large range of speeds is observed, suggesting different generation mechanisms. In contrast, a smaller range of length scales normalized to the Debye length λD is found. For ESWs the average length between the positive and negative peak fields is 9 λD, comparable to the average half wavelength of electrostatic waves. Statistically, the lengths and speeds of ESWs and electrostatic waves are shown to be similar. The length scales and potentials of the ESWs are consistent with predictions for stable electron holes. The maximum ESW potentials are shown to be constrained by the length scale and the magnetic field strength at the magnetopause and in the magnetosheath. The observed waves are consistent with those generated by the warm bistreaming instability, beam-plasma instability, and electron-ion instabilities, which account for the observed speeds and length scales. The large range of wave speeds suggests that the waves can couple different electron populations and electrons with ions, heating the plasma and contributing to anomalous resistivity.

Journal ArticleDOI
TL;DR: Application of the reference standards in nonlinear transmittance measurements is discussed and significant improvement of the accuracy is achieved by means of rigorous evaluation of the quadratic dependence of the fluorescence signal on the incident photon flux in the whole wavelength range.
Abstract: Degenerate two-photon absorption (2PA) of a series of organic fluorophores is measured using femtosecond fluorescence excitation method in the wavelength range, λ2PA = 680-1050 nm, and ~100 MHz pulse repetition rate. The function of relative 2PA spectral shape is obtained with estimated accuracy 5%, and the absolute 2PA cross section is measured at selected wavelengths with the accuracy 8%. Significant improvement of the accuracy is achieved by means of rigorous evaluation of the quadratic dependence of the fluorescence signal on the incident photon flux in the whole wavelength range, by comparing results obtained from two independent experiments, as well as due to meticulous evaluation of critical experimental parameters, including the excitation spatial- and temporal pulse shape, laser power and sample geometry. Application of the reference standards in nonlinear transmittance measurements is discussed.

Journal ArticleDOI
TL;DR: The significance of the magnitude of the Prandtl number of a fluid in the propagation direction of induced convection rolls is elucidated in this article, where the authors report on the physical mechanism to account for the formation and orientation of previously unexplored supra-wavelength periodic surface structures in dielectrics, following melting and subsequent capillary effects induced upon irradiation with ultrashort laser pulses.
Abstract: The significance of the magnitude of the Prandtl number of a fluid in the propagation direction of induced convection rolls is elucidated. Specifically, we report on the physical mechanism to account for the formation and orientation of previously unexplored supra-wavelength periodic surface structures in dielectrics, following melting and subsequent capillary effects induced upon irradiation with ultrashort laser pulses. Counterintuitively, it is found that such structures exhibit periodicities, which are markedly, even multiple times, higher than the laser excitation wavelength. It turns out that the extent to which the hydrothermal waves relax depends upon the laser beam energy, produced electron densities upon excitation with femtosecond pulsed lasers, the magnitude of the induced initial local roll disturbances, and the magnitude of the Prandtl number with direct consequences on the orientation and size of the induced structures. It is envisaged that this elucidation may be useful for the interpretation of similar, albeit large-scale periodic or quasiperiodic structures formed in other natural systems due to thermal gradients, while it can also be of great importance for potential applications in biomimetics.

Journal ArticleDOI
TL;DR: It is shown that the width of a large absorption peak in the frequency spectrum can be broadened if several rectangular channels in the unit cell are detuned and the detuning is achieved by varying the length of the side resonators for each channel.
Abstract: Perfect (100%) absorption by thin structures consisting of a periodic arrangement of rectangular quarter-wavelength channels with side detuned quarter-wavelength resonators is demonstrated. The thickness of these structures is 13-17 times thinner than the acoustic wavelength. This low frequency absorption is due to a slow sound wave propagating in the main rectangular channel. A theoretical model is proposed to predict the complex wavenumber in this channel. It is shown that the speed of sound in the channel is much lower than in the air, almost independent of the frequency in the low frequency range, and it is dispersive inside the induced transparency band which is observed. The perfect absorption condition is found to be caused by a critical coupling between the rectangular channel (sub-wavelength resonators) and the incoming wave. It is shown that the width of a large absorption peak in the frequency spectrum can be broadened if several rectangular channels in the unit cell are detuned. The detuning is achieved by varying the length of the side resonators for each channel. The predicted absorption coefficients are validated experimentally. Two resonant cells were produced with stereolithography which enabled the authors to incorporate curved side resonators.

Journal ArticleDOI
TL;DR: In this article, a theoretical model is used to study wave energy attenuation and directional spreading of ocean wave spectra in the marginal ice zone (MIZ), which is constructed as an array of tens of thousands of compliant circular ice floes, with randomly selected positions and radii determined by an empirical floe size distribution.
Abstract: A theoretical model is used to study wave energy attenuation and directional spreading of ocean wave spectra in the marginal ice zone (MIZ). The MIZ is constructed as an array of tens of thousands of compliant circular ice floes, with randomly selected positions and radii determined by an empirical floe size distribution. Linear potential flow and thin elastic plate theories model the coupled water–ice system. A new method is proposed to solve the time-harmonic multiple scattering problem under a multidirectional incident wave forcing with random phases. It provides a natural framework for tracking the evolution of the directional properties of a wave field through the MIZ. The attenuation and directional spreading are extracted from ensembles of the wave field with respect to realizations of the MIZ and incident forcing randomly generated from prescribed distributions. The averaging procedure is shown to converge rapidly so that only a small number of simulations need to be performed. Far-field approximations are investigated, allowing efficiency improvements with negligible loss of accuracy. A case study is conducted for a particular MIZ configuration. The observed exponential attenuation of wave energy through the MIZ is reproduced by the model, while the directional spread is found to grow linearly with distance. The directional spreading is shown to weaken when the wavelength becomes larger than the maximum floe size.

Journal ArticleDOI
TL;DR: In this article, the development of second-mode instability waves within the boundary layer on a slender cone under high Mach number and high-enthalpy conditions is investigated. But the wavepacket structures evolve from a "rope-like" appearance to become more interwoven as the disturbance nears breakdown.
Abstract: Visualization experiments are performed to investigate the development of instability waves within the boundary layer on a slender cone under high Mach number conditions. The experimental facility is a reflected-shock wind tunnel, allowing both low (Mach-8 flight equivalent) and high-enthalpy conditions to be simulated. Second-mode instability waves are visualized using a high-speed schlieren set-up, with pulse bursting of the light source allowing the propagation speed of the wavepackets to be unambiguously resolved. This, in combination with wavelength information derived from the images, enables the calculation of the disturbance frequencies. At the lower-enthalpy conditions, we concentrate on the late laminar and transitional regions of the flow. General characteristics are revealed through time-resolved and ensemble-averaged spectra on both smooth and porous ceramic surfaces of the cone. Analysis of the development of individual wavepackets is then performed. It is found that the wavepacket structures evolve from a ‘rope-like’ appearance to become more interwoven as the disturbance nears breakdown. The wall-normal disturbance distributions of both the fundamental and first harmonic, which initially have local maxima at the wall and near y=_ D 0:7–0.75, exhibit an increase in signal energy close to the boundary-layer edge during this evolution. The structure angle of the disturbances also undergoes subtle changes as the wavepacket develops prior to breakdown. Experiments are also performed at high-enthalpy (h0 _ 12 MJ kg

Journal ArticleDOI
TL;DR: In this paper, a compact fiber-optic vector magnetometer based on directional scattering between polarized plasmon waves and ferro-magnetic nanoparticles is demonstrated, which uses a short section of tilted fiber Bragg grating (TFBG) coated with a nanometer scale gold film and packaged with a magnetic fluid (Fe3O4) inside a capillary.
Abstract: A compact fiber-optic vector magnetometer based on directional scattering between polarized plasmon waves and ferro-magnetic nanoparticles is demonstrated. The sensor configuration reported in this work uses a short section of tilted fiber Bragg grating (TFBG) coated with a nanometer scale gold film and packaged with a magnetic fluid (Fe3O4) inside a capillary. The transmission spectrum of the sensor provides a fine comb of narrowband resonances that overlap with a broader absorption of the surface plasmonresonance (SPR). The wavelength of the SPR attenuation in transmission shows high sensitivity to slight perturbations by magnetic fields, due to the strong directional scattering between the SPR attenuated cladding modes and the magnetic fluid near the fiber surface. Both the orientation (2 nm/deg) and the intensity (1.8 nm/mT) of magnetic fields can be determined unambiguously from the TFBG spectrum. Temperature cross sensitivity can be referenced out by monitoring the wavelength of the core mode resonance simultaneously.

Journal ArticleDOI
TL;DR: A tunable source of short-wavelength spin waves based on highly localized and strongly pinned magnetic domain walls in ferroelectric-ferromagnetic bilayers is proposed, enabling efficient spin wave emission at frequencies up to 100 GHz and wavelengths down to 20 nm.
Abstract: Miniaturization of magnonic devices for wave-like computing requires emission of short-wavelength spin waves, a key feature that cannot be achieved with microwave antennas. In this paper, we propose a tunable source of short-wavelength spin waves based on highly localized and strongly pinned magnetic domain walls in ferroelectric-ferromagnetic bilayers. When driven into oscillation by a microwave spin-polarized current, the magnetic domain walls emit spin waves with the same frequency as the excitation current. The amplitude of the emitted spin waves and the range of attainable excitation frequencies depend on the availability of domain wall resonance modes. In this respect, pinned domain walls in magnetic nanowires are particularly attractive. In this geometry, spin wave confinement perpendicular to the nanowire axis produces a multitude of domain wall resonances enabling efficient spin wave emission at frequencies up to 100 GHz and wavelengths down to 20 nm. At high frequency, the emission of spin waves in magnetic nanowires becomes monochromatic. Moreover, pinning of magnetic domain wall oscillators onto the same ferroelectric domain boundary in parallel nanowires guarantees good coherency between spin wave sources, which opens perspectives towards the realization of Mach-Zehnder type logic devices and sensors.

Journal ArticleDOI
TL;DR: Theoretical analysis and experimental demonstration are presented for the generation of cylindrical vector beams (CVBs) via mode conversion in fiber from HE11 mode to TM01 and TE01 modes, which have radial and azimuthal polarizations, respectively.
Abstract: Theoretical analysis and experimental demonstration are presented for the generation of cylindrical vector beams (CVBs) via mode conversion in fiber from HE11 mode to TM01 and TE01 modes, which have radial and azimuthal polarizations, respectively. Intermodal coupling is caused by an acoustic flexural wave applied on the fiber, whereas polarization control is necessary for the mode conversion, i.e. HE11x→TM01 and HE11y→TE01 for acoustic vibration along the x-axis. The frequency of the RF driving signal for actuating the acoustic wave is determined by the phase matching condition that the period of acoustic wave equals the beatlength of two coupled modes. With phase matching condition tunability, this approach can be used to generate different types of CVBs at the same wavelength over a broadband. Experimental demonstration was done in the visible and communication bands.

Journal ArticleDOI
TL;DR: In this paper, a design based on space-variant subwavelength grating with discrete orientational distribution was proposed for spin-orbit optical elements with topological charge up to | l | = 10.
Abstract: Submicron-thick gold fi lms endowed with subwavelength patterning allow on-demand topological shaping of light, hence the precise delivery of optical orbital angular momentum. Several kinds of metallic metasurfaces enabling the generation of optical vortices with arbitrary topological charges in the visible domain are fabricated following a design based on space-variant subwavelength grating with discrete orientational distribution. The optical performances of obtained fl at spin–orbit optical elements designed to operate at 532 nm wavelength are experimentally assessed and satisfactorily compared to expectations. About 80% of optical vortex generation purity for predetermined topological charge up to | l | = 10 is achieved. Other designs that allow continuous orientational distribution of nanogratings as well as the superposition of orbital angular momentum states are also proposed.

Journal ArticleDOI
TL;DR: Efficient four-wave mixing among different spatial modes in a 1-km long two-mode fiber at telecommunication wavelengths is demonstrated and it is confirmed experimentally that BS has a larger bandwidth than PC for the optimum choice of the pump wavelength separation.
Abstract: We demonstrate efficient four-wave mixing among different spatial modes in a 1-km long two-mode fiber at telecommunication wavelengths. Two pumps excite the LP01 and LP11 modes, respectively, while the probe signal excites the LP01 mode, and the phase conjugation (PC) and Bragg scattering (BS) idlers are generated in the LP11 mode. For these processes we experimentally characterize their phase matching efficiency and bandwidth and find that they depend critically on the wavelength separation of the two pumps, in good agreement with the numerical study we carried out. We also confirm experimentally that BS has a larger bandwidth than PC for the optimum choice of the pump wavelength separation.