Wavelength-division multiplexing

About: Wavelength-division multiplexing is a research topic. Over the lifetime, 25059 publications have been published within this topic receiving 332027 citations. The topic is also known as: WDM.

Optical components for WDM lightwave networks

Abstract: Recently, there has been growing interest in developing optical fiber networks to support the increasing bandwidth demands of multimedia applications, such as video conferencing and World Wide Web browsing. One technique for accessing the huge bandwidth available in an optical fiber is wavelength-division multiplexing (WDM). Under WDM, the optical fiber bandwidth is divided into a number of nonoverlapping wavelength bands, each of which may be accessed at peak electronic rates by an end user. By utilizing WDM in optical networks, we can achieve link capacities on the order of 50 THz. The success of WDM networks depends heavily on the available optical device technology. This paper is intended as a tutorial on some of the optical device issues in WDM networks. It discusses the basic principles of optical transmission in fiber and reviews the current state of the art in optical device technology. It introduces some of the basic components in WDM networks, discusses various implementations of these components, and provides insights into their capabilities and limitations. Then, this paper demonstrates how various optical components can be incorporated into WDM optical networks for both local and wide-area applications. Finally, the paper provides a brief review of experimental WDM networks that have been implemented.

Recent advances in high-density and large-scale AWG multi/demultiplexers with higher index-contrast silica-based PLCs

Abstract: This paper reviews recent progress on high-density and large-scale arrayed-waveguide-grating (AWG) multi/demultiplexers, which have been developed for wavelength division multiplexing (WDM)-based photonic networks. The AWG has been the key to the construction of flexible and large-capacity WDM networks. This is because, compared with conventional filters consisting of thin-film interference filters and microoptics, the AWG offers the advantages of low loss, high port counts, and mass productivity. To improve such characteristics further, low-loss, higher index-contrast (super-high /spl Delta/) planar lightwave circuits (PLCs) with a bending radius of 2 mm have recently been developed. It has been shown that these PLCs are effective for use in constructing a compact AWG module with 1/5 the volume of a conventional module and large-scale AWGs with 256 and 400 channels. Three techniques for low-loss fiber connection with spot-size converters have also been developed for the super-high /spl Delta/ PLCs, and it has been confirmed that these techniques can be applied to the fabrication of AWG modules. Furthermore, two-stage tandem AWG-type multi/demultiplexers with more than 1000 channels have been demonstrated. This paper describes the progress that has been made on these high-density and large-scale AWGs, which are expected to contribute greatly to the construction of future photonic networks including optical add/drop multiplexing systems and optical crossconnect systems.

OSNR monitoring technique using polarization-nulling method

Abstract: We report on the simple technique for monitoring the optical signal-to-noise ratios (OSNRs) of wavelength-division-multiplexed (WDM) signals. This technique, based on the polarization-nulling method, was implemented simply by using a rotating quarter-wave plate and rotating linear polarizer. However, the performance of this technique could be affected by nonlinear birefringence and polarization-mode dispersion (PMD). The result shows that this technique is suitable for monitoring the OSNRs of highspeed (>10-Gb/s) WDM signals transported over the fiber link with low PMD.

10-Channel Mode (de)multiplexer with Dual Polarizations

Abstract: A dual-polarization 10-channel mode (de)multiplexer is proposed and realized with cascaded dual-core adiabatic tapers on a silicon-on-insulator (SOI) platform. The mode demultiplexer has a 2.3 μm-wide multimode bus waveguide, which supports six mode-channels of TE polarization and four mode-channels of TM polarization. These ten mode-channels are (de)multiplexed with five cascaded dual-core adiabatic tapers based on SOI nanowires. The widths for these dual-cores are chosen optimally according to the dispersion curves of the dual-core SOI nanowire, so that the desired highest-order modes of TE- and TM-polarizations are extracted simultaneously. These two extracted mode-channels are coupled very efficiently to the fundamental modes of TE- and TM-polarizations (TE0 and TM0) in the narrow waveguide, respectively, which are then separated by using a polarization beam splitter based on bent directional couplers. A chip consisting of a pair of 10-channel mode (de)multiplexers is fabricated and then tested with data transmission of 30Gbps/channel. The measurement results show that all TM- and TE mode-channels have low crosstalks (–15∼–25 dB) and low excess losses (0.2∼1.8 dB) over a broad wavelength band of ∼90 nm, which makes it WDM (wavelength-division-multiplexing)-compatible and thus suitable for high capacity on-chip optical interconnects.

Long-haul transmission of16×52.5 Gbits/s polarization-division- multiplexed OFDM enabled by MIMO processing (Invited)

Abstract: Focus Issue on Orthogonal-Frequency-Division Multiplexed Communications Systems and Networks We discuss the realization and performance of polarization-division-multiplexed orthogonal frequency division multiplexing (PDM-OFDM) for long-haul transmission systems. Polarization demultiplexing of the PDM signal at the receiver is realized by employing a multiple-input multiple-output (MIMO) detector. Using a recirculating loop a long-haul transmission experiment is reported of 52.5 Gbits/s PDM-OFDM (40 Gbits/s after coding) over 4160 km of standard single-mode fiber (SSMF). In this transmission experiment, 16 wavelength-division-multiplexed (WDM) channels are transmitted at 50 GHz channel spacing, and we show that MIMO processing in the receiver enables both polarization demultiplexing and a large PMD tolerance.