Wavelength-division multiplexing

About: Wavelength-division multiplexing is a research topic. Over the lifetime, 25059 publications have been published within this topic receiving 332027 citations. The topic is also known as: WDM.

Evolution of stimulated Raman crosstalk in wavelength division multiplexed systems

Abstract: An exact analytical solution for the evolution of stimulated Raman crosstalk in a singlemode WDM fiber system is presented utilizing the triangular approximation to the Raman gain spectrum. This approach provides a rigorous expression for crosstalk impairment. In the limit of small interchannel power exchange, our result reduces to Chraplyvy's previous estimate. Our formulation can be employed to predict the Raman penalty in future multiwavelength fiber communication systems.

Microoptic grating multiplexers and optical isolators for fiber-optic communications

Abstract: As new optical devices for increasing further the utility of and to expand the application of fiber-optic communications, grating multiplexers and isolators have been developed for 0.8 μm band employing microoptic approach. The development of these devices is the subject of this paper. The devices have desirable features of small size, compactness, high optical performances, and high reliability. The grating multiplexer consists of a graded-index rod, a blazed reflection grating replicated onto the graded-index rod slanting facet or a wedge facet, and an input-output fiber array. Simple calculations have been done to determine necessary element parameters for a given channel spacing. Experimental results are presented for five-channel multiplexers devised using a SELFOC®lens. Around 3 dB insertion loss and less than -30 dB crosstalk have been obtained for about 35 nm channel spacing in overall device size of 18 \times 13 \times 50 mm. Faraday rotation optical isolators for 0.8 μm band have been miniaturized by employing an efficient paramagnetic glass Faraday rotator, a magnet with a through hole and a folded optics in the Faraday rotator. The path number in the folded optics has been optimized in terms of trading-off between the magnet size and the insertion loss. A 0.9 dB insertion loss including fiber coupling loss and 36 dB isolation have been obtained in overall device size of 24 \times 24.5 \times 42 mm. Results on the temperature and wavelength dependence of the isolation are also presented. In addition, fundamental properties of optical circulators for 0.8 μm band and optical isolators and circulators both for 1.3 μm band, developed as extended modifications of the optical isolators for 0.8 μm band, are briefly described.

Demonstration of a coherent UDWDM-PON with real-time processing

Abstract: A filterless coherent PON with channel spacing down to 2.8 GHz and real-time processing in an FPGA is demonstrated. 64-channel operation is verified experimentally using SSB generation at the OLT and fully integrated ONU transceivers.

Ultra-wide-band tellurite-based fiber Raman amplifier

Abstract: We describe the first wide-band tellurite-based fiber Raman amplifier (T-FRA) for application to seamless ultra-large-capacity dense wavelength-division multiplexing (WDM) systems. First, we confirmed that the Raman scattering characteristics of the tellurite-based fiber has so large a gain coefficient and Stokes shift that we can achieve a wide-band tellurite-based fiber Raman amplifier with a shorter fiber length than when using silica-based fiber. Second, we investigated the small signal gain and the signal transmission characteristics for a high gain and high output power operation with a single-stage amplifier. Focusing on double Rayleigh scattering, we compared the high gain limit of tellurite- and silica-based fibers. We then studied the impact of nonlinear effects by measuring the bit error rate (BER) when using a two-stage amplifier with a high output power of 18.8 dBm in which we simultaneously amplified eight channel signals in the L-band located on the ITU 100-GHz grid. Finally, we designed a wide-band tellurite-based fiber Raman amplifier with a multiwavelength band pumping scheme. We constructed this amplifier with a tellurite-based fiber only 250 m in length pumped by four-wavelength-channel laser diodes, and it provided a 160-nm bandwidth with a gain of over 10 dB and a noise figure below 10 dB from 1490 to 1650 nm. We also measured the BER to confirm the transmission characteristics of the amplifier for single channel operation over the whole signal wavelength range of 160 nm. We thus confirmed that the amplifier could be employed in ultra-high-capacity WDM systems.