Showing papers on "Wireless published in 2014"

Cellular architecture and key technologies for 5G wireless communication networks

Abstract: The fourth generation wireless communication systems have been deployed or are soon to be deployed in many countries. However, with an explosion of wireless mobile devices and services, there are still some challenges that cannot be accommodated even by 4G, such as the spectrum crisis and high energy consumption. Wireless system designers have been facing the continuously increasing demand for high data rates and mobility required by new wireless applications and therefore have started research on fifth generation wireless systems that are expected to be deployed beyond 2020. In this article, we propose a potential cellular architecture that separates indoor and outdoor scenarios, and discuss various promising technologies for 5G wireless communication systems, such as massive MIMO, energy-efficient communications, cognitive radio networks, and visible light communications. Future challenges facing these potential technologies are also discussed.

Scenarios for 5G mobile and wireless communications: the vision of the METIS project

Abstract: METIS is the EU flagship 5G project with the objective of laying the foundation for 5G systems and building consensus prior to standardization. The METIS overall approach toward 5G builds on the evolution of existing technologies complemented by new radio concepts that are designed to meet the new and challenging requirements of use cases today?s radio access networks cannot support. The integration of these new radio concepts, such as massive MIMO, ultra dense networks, moving networks, and device-to-device, ultra reliable, and massive machine communications, will allow 5G to support the expected increase in mobile data volume while broadening the range of application domains that mobile communications can support beyond 2020. In this article, we describe the scenarios identified for the purpose of driving the 5G research direction. Furthermore, we give initial directions for the technology components (e.g., link level components, multinode/multiantenna, multi-RAT, and multi-layer networks and spectrum handling) that will allow the fulfillment of the requirements of the identified 5G scenarios.

A Critical Review of Recent Progress in Mid-Range Wireless Power Transfer

Abstract: Starting from Tesla's principles of wireless power transfer a century ago, this critical review outlines recent magneto-inductive research activities on wireless power transfer with the transmission distance greater than the transmitter coil dimension. It summarizes the operating principles of a range of wireless power research into 1) the maximum power transfer and 2) the maximum energy efficiency principles. The differences and the implications of these two approaches are explained in terms of their energy efficiency and transmission distance capabilities. The differences between the system energy efficiency and the transmission efficiency are also highlighted. The review covers the two-coil systems, the four-coil systems, the systems with relay resonators and the wireless domino-resonator systems. Related issues including human exposure issues and reduction of winding resistance are also addressed. The review suggests that the use of the maximum energy efficiency principle in the two-coil systems is suitable for short-range rather than mid-range applications, the use of the maximum power transfer principle in the four-coil systems is good for maximizing the transmission distance, but is under a restricted system energy efficiency (<;50%); the use of the maximum energy efficiency principle in relay or domino systems may offer a good compromise for good system energy efficiency and transmission distance on the condition that relay resonators can be placed between the power source and the load.

Spatial Modulation for Generalized MIMO: Challenges, Opportunities, and Implementation

Abstract: A key challenge of future mobile communication research is to strike an attractive compromise between wireless network's area spectral efficiency and energy efficiency. This necessitates a clean-slate approach to wireless system design, embracing the rich body of existing knowledge, especially on multiple-input-multiple-ouput (MIMO) technologies. This motivates the proposal of an emerging wireless communications concept conceived for single-radio-frequency (RF) large-scale MIMO communications, which is termed as SM. The concept of SM has established itself as a beneficial transmission paradigm, subsuming numerous members of the MIMO system family. The research of SM has reached sufficient maturity to motivate its comparison to state-of-the-art MIMO communications, as well as to inspire its application to other emerging wireless systems such as relay-aided, cooperative, small-cell, optical wireless, and power-efficient communications. Furthermore, it has received sufficient research attention to be implemented in testbeds, and it holds the promise of stimulating further vigorous interdisciplinary research in the years to come. This tutorial paper is intended to offer a comprehensive state-of-the-art survey on SM-MIMO research, to provide a critical appraisal of its potential advantages, and to promote the discussion of its beneficial application areas and their research challenges leading to the analysis of the technological issues associated with the implementation of SM-MIMO. The paper is concluded with the description of the world's first experimental activities in this vibrant research field.

Cache in the air: exploiting content caching and delivery techniques for 5G systems

Abstract: The demand for rich multimedia services over mobile networks has been soaring at a tremendous pace over recent years. However, due to the centralized architecture of current cellular networks, the wireless link capacity as well as the bandwidth of the radio access networks and the backhaul network cannot practically cope with the explosive growth in mobile traffic. Recently, we have observed the emergence of promising mobile content caching and delivery techniques, by which popular contents are cached in the intermediate servers (or middleboxes, gateways, or routers) so that demands from users for the same content can be accommodated easily without duplicate transmissions from remote servers; hence, redundant traffic can be significantly eliminated. In this article, we first study techniques related to caching in current mobile networks, and discuss potential techniques for caching in 5G mobile networks, including evolved packet core network caching and radio access network caching. A novel edge caching scheme based on the concept of content-centric networking or information-centric networking is proposed. Using trace-driven simulations, we evaluate the performance of the proposed scheme and validate the various advantages of the utilization of caching content in 5G mobile networks. Furthermore, we conclude the article by exploring new relevant opportunities and challenges.

5GNOW: non-orthogonal, asynchronous waveforms for future mobile applications

Abstract: This article provides some fundamental indications about wireless communications beyond LTE/LTE-A (5G), representing the key findings of the European research project 5GNOW. We start with identifying the drivers for making the transition to 5G networks. Just to name one, the advent of the Internet of Things and its integration with conventional human-initiated transmissions creates a need for a fundamental system redesign. Then we make clear that the strict paradigm of synchronism and orthogonality as applied in LTE prevents efficiency and scalability. We challenge this paradigm and propose new key PHY layer technology components such as a unified frame structure, multicarrier waveform design including a filtering functionality, sparse signal processing mechanisms, a robustness framework, and transmissions with very short latency. These components enable indeed an efficient and scalable air interface supporting the highly varying set of requirements originating from the 5G drivers.

Simultaneous wireless information and power transfer in modern communication systems

Abstract: Energy harvesting for wireless communication networks is a new paradigm that allows terminals to recharge their batteries from external energy sources in the surrounding environment. A promising energy harvesting technology is wireless power transfer where terminals harvest energy from electromagnetic radiation. Thereby, the energy may be harvested opportunistically from ambient electromagnetic sources or from sources that intentionally transmit electromagnetic energy for energy harvesting purposes. A particularly interesting and challenging scenario arises when sources perform simultaneous wireless information and power transfer (SWIPT), as strong signals not only increase power transfer but also interference. This article provides an overview of SWIPT systems with a particular focus on the hardware realization of rectenna circuits and practical techniques that achieve SWIPT in the domains of time, power, antennas, and space. The article also discusses the benefits of a potential integration of SWIPT technologies in modern communication networks in the context of resource allocation and cooperative cognitive radio networks.

Millimeter-Wave Enhanced Local Area Systems: A High-Data-Rate Approach for Future Wireless Networks

Abstract: Wireless data traffic is projected to skyrocket 10 000 fold within the next 20 years. To tackle this incredible increase in wireless data traffic, a first approach is to further improve spectrally efficient systems such as 4G LTE in bands below 6 GHz by using more advanced spectral efficiency techniques. However, the required substantial increase in system complexity along with fundamental limits on hardware implementation and channel conditions may limit the viability of this approach. Furthermore, the end result would be an extremely spectrally efficient system with little room for future improvement to meet the ever-growing wireless data usage. The second approach is to move up in frequency, into an unused nontraditional spectrum where enormous bandwidths are available, such as at millimeter wave (mmWave). The mmWave option enables the use of simple air interfaces since large bandwidths can be exploited (e.g., 2 GHz) to achieve high data rates rather than relying on highly complex techniques originally aimed at achieving a high spectral efficiency with smaller bandwidths. In addition, mmWave systems will easily evolve to even higher system capacities, because there will be plenty of margin to improve the spectral efficiency as data demands further increase. In this paper, a case is made for using mmWave for a fifth generation (5G) wireless system for ultradense networks by presenting an overview of enhanced local area (eLA) technology at mmWave with emphasis on 5G requirements, spectrum considerations, propagation and channel modeling, air-interface and multiantenna design, and network architecture solutions.

Applications of self-interference cancellation in 5G and beyond

Abstract: Self-interference cancellation invalidates a long-held fundamental assumption in wireless network design that radios can only operate in half duplex mode on the same channel. Beyond enabling true in-band full duplex, which effectively doubles spectral efficiency, self-interference cancellation tremendously simplifies spectrum management. Not only does it render entire ecosystems like TD-LTE obsolete, it enables future networks to leverage fragmented spectrum, a pressing global issue that will continue to worsen in 5G networks. Self-interference cancellation offers the potential to complement and sustain the evolution of 5G technologies toward denser heterogeneous networks and can be utilized in wireless communication systems in multiple ways, including increased link capacity, spectrum virtualization, any-division duplexing (ADD), novel relay solutions, and enhanced interference coordination. By virtue of its fundamental nature, self-interference cancellation will have a tremendous impact on 5G networks and beyond.

Harvesting Wireless Power: Survey of Energy-Harvester Conversion Efficiency in Far-Field, Wireless Power Transfer Systems

Abstract: The idea of wireless power transfer (WPT) has been around since the inception of electricity. In the late 19th century, Nikola Tesla described the freedom to transfer energy between two points without the need for a physical connection to a power source as an ?all-surpassing importance to man? [1]. A truly wireless device, capable of being remotely powered, not only allows the obvious freedom of movement but also enables devices to be more compact by removing the necessity of a large battery. Applications could leverage this reduction in size and weight to increase the feasibility of concepts such as paper-thin, flexible displays [2], contact-lens-based augmented reality [3], and smart dust [4], among traditional point-to-point power transfer applications. While several methods of wireless power have been introduced since Tesla?s work, including near-field magnetic resonance and inductive coupling, laser-based optical power transmission, and far-field RF/microwave energy transmission, only RF/microwave and laser-based systems are truly long-range methods. While optical power transmission certainly has merit, its mechanisms are outside of the scope of this article and will not be discussed.

Millimeter-wave massive MIMO: the next wireless revolution?

Abstract: The combination of millimeter-wave communications, arrays with a massive number of antennas, and small cell geometries is a symbiotic convergence of technologies that has the potential to dramatically improve wireless access and throughput. This article outlines the benefits, challenges, and potential solutions associated with cellular networks that incorporate these technologies.

QuaDRiGa: A 3-D Multi-Cell Channel Model With Time Evolution for Enabling Virtual Field Trials

Abstract: Channel models are important tools to evaluate the performance of new concepts in mobile communications. However, there is a tradeoff between complexity and accuracy. In this paper, we extend the popular Wireless World Initiative for New Radio (WINNER) channel model with new features to make it as realistic as possible. Our approach enables more realistic evaluation results at an early stage of algorithm development. The new model supports 3-D propagation, 3-D antenna patterns, time evolving channel traces of arbitrary length, scenario transitions and variable terminal speeds. We validated the model by measurements in a coherent LTE advanced testbed in downtown Berlin, Germany. We then reproduced the same scenario in the model and compared several channel parameters (delay spread, path gain, K-factor, geometry factor and capacity). The results match very well and we can accurately predict the performance for an urban macro-cell setup with commercial high-gain antennas. At the same time, the computational complexity does not increase significantly and we can use all existing WINNER parameter tables. These artificial channels, having equivalent characteristics as measured data, enable virtual field trials long before prototypes are available.

Fundamentals of wireless communications

Abstract: Radio Frequency (RF) communications are an important smart grid enabler for functions such as volt/VAR control, recloser control, and feeder restorations and isolation. This paper will give a basic tutorial on the types of radio frequency communications and the benefits and liabilities of each. Specific topics to be explored will be licensed versus unlicensed frequencies, distance between remote radios and base stations, and communications architectures. Radio technology is often referred in numerical ranges or frequencies. The decision on which frequency to employ in a network depends on a few key variables. Prior to deciding which frequency for a network, the application for the radio use will assist with dictation of which frequency range to utilize. Applications such as recloser control and volt/Var control may require a radio device that can provide a high bandwidth/fast speed solution. Other SCADA applications such as sensor monitoring may only require small bandwidth and for data delivery to be at a much slower speed. Another variable when deciding on a radio network is the distance from the main SCADA hosts to end remote devices such as RTUs or PLCs. Lower end frequencies (100 MHz-900 MHz) provide further coverage and greater distance from base stations/Access Points to remote end devices, whereas higher frequencies (2.4 GHz-5.8 GHz) provide shorter distance coverage, but higher bandwidth and relay data back to SCADA hosts much faster. Determining a network's architecture should focus on either the desire of a private, licensed network or the notion of an unlicensed, less expensive network. The lower licensed frequency ranges (100 MHz, 200 MHz, 400 MHz and upper 900 MHz bands) are often referred to as MAS (Multiple Address Systems) networks and require license acquisition from the FCC once geographical coverage is determined. These licenses are granted for the lower frequencies as mentioned previously but are considered the proprietary use of the owner. Anyone operating in these frequencies will be fined/cited by the FCC. The less expensive, unlicensed network is allowable for frequencies ranging from 902MHz-928MHz, which is defined as the ISM (Industrial, Scientific, and Medical) bands. Within the unlicensed frequency band, there exist registered bands (3.65 GHz) that employ WiMax (Wireless Microwave Access for Broadband) technology that provide shorter coverage for remote devices, however, the bandwidth and speed provided by these frequencies make them just as popular for networks. Further analysis and discussion of licensed versus unlicensed radio wireless communications is proposed in this paper.

Space-division multiplexing: the next frontier in optical communication

Abstract: Space-division multiplexing (SDM) uses multiplicity of space channels to increase capacity for optical communication. It is applicable for optical communication in both free space and guided waves. This paper focuses on SDM for fiber-optic communication using few-mode fibers or multimode fibers, in particular on the critical challenge of mode crosstalk. Multiple-input–multiple-output (MIMO) equalization methods developed for wireless communication can be applied as an electronic method to equalize mode crosstalk. Optical approaches, including differential modal group delay management, strong mode coupling, and multicore fibers, are necessary to bring the computational complexity for MIMO mode crosstalk equalization to practical levels. Progress in passive devices, such as (de)multiplexers, and active devices, such as amplifiers and switches, which are considered straightforward challenges in comparison with mode crosstalk, are reviewed. Finally, we present the prospects for SDM in optical transmission and networking.

Mimo for millimeter-wave wireless communications: beamforming, spatial multiplexing, or both?

Abstract: The use of mmWave frequencies for wireless communications offers channel bandwidths far greater than previously available, while enabling dozens or even hundreds of antenna elements to be used at the user equipment, base stations, and access points. To date, MIMO techniques, such as spatial multiplexing, beamforming, and diversity, have been widely deployed in lower-frequency systems such as IEEE 802.11n/ac (wireless local area networks) and 3GPP LTE 4G cellphone standards. Given the tiny wavelengths associated with mmWave, coupled with differences in the propagation and antennas used, it is unclear how well spatial multiplexing with multiple streams will be suited to future mmWave mobile communications. This tutorial explores the fundamental issues involved in selecting the best communications approaches for mmWave frequencies, and provides insights, challenges, and appropriate uses of each MIMO technique based on early knowledge of the mmWave propagation environment.

5G wireless backhaul networks: challenges and research advances

Abstract: 5G networks are expected to achieve gigabit-level throughput in future cellular networks. However, it is a great challenge to treat 5G wireless backhaul traffic in an effective way. In this article, we analyze the wireless backhaul traffic in two typical network architectures adopting small cell and millimeter wave communication technologies. Furthermore, the energy efficiency of wireless backhaul networks is compared for different network architectures and frequency bands. Numerical comparison results provide some guidelines for deploying future 5G wireless backhaul networks in economical and highly energy-efficient ways.

Power Allocation Strategies in Energy Harvesting Wireless Cooperative Networks

Abstract: In this paper, a wireless cooperative network is considered, in which multiple source-destination pairs communicate with each other via an energy harvesting relay. The focus of this paper is on the relay's strategies to distribute the harvested energy among the multiple users and their impact on the system performance. Specifically, a non-cooperative strategy that uses the energy harvested from the i-th source as the relay transmission power to the i-th destination is considered first, and asymptotic results show that its outage performance decays as log SNR/SNR. A faster decay rate, 1/SNR, can be achieved by two centralized strategies proposed next, of which a water filling based one can achieve optimal performance with respect to several criteria, at the price of high complexity. An auction based power allocation scheme is also proposed to achieve a better tradeoff between system performance and complexity. Simulation results are provided to confirm the accuracy of the developed analytical results.

Telecommunications apparatus and methods

Abstract: A wireless telecommunication system comprises base stations for communicating with terminal devices. One or more base stations support a power boost operating mode in which a base station's available transmission power is concentrated in a subset of its available transmission resources to provide enhanced transmission powers as compared to transmission powers on these transmission resources when the base station is not operating in the power boost mode. A base station establishes an extent to which one or more base stations in the wireless telecommunications system support the power boost operating mode conveys an indication of this to a terminal device. The terminal device receives the indication and uses the corresponding information to control its acquisition of a base station of the wireless telecommunication system, for example by taking account of which base stations support power boosting and/or when power boosting is supported during a cell attach procedure.

Robust Beamforming for Secure Communication in Systems With Wireless Information and Power Transfer

Abstract: This paper considers a multiuser multiple-input single-output (MISO) downlink system with simultaneous wireless information and power transfer. In particular, we focus on secure communication in the presence of passive eavesdroppers and potential eavesdroppers (idle legitimate receivers). We study the design of a resource allocation algorithm minimizing the total transmit power for the case when the legitimate receivers are able to harvest energy from radio frequency signals. Our design advocates the dual use of both artificial noise and energy signals in providing secure communication and facilitating efficient wireless energy transfer. The algorithm design is formulated as a non-convex optimization problem. The problem formulation takes into account artificial noise and energy signal generation for protecting the transmitted information against both considered types of eavesdroppers when imperfect channel state information (CSI) of the potential eavesdroppers and no CSI of the passive eavesdroppers are available at the transmitter. Besides, the problem formulation also takes into account different quality of service (QoS) requirements: a minimum required signal-to-interference-plus-noise ratio (SINR) at the desired receiver; maximum tolerable SINRs at the potential eavesdroppers; a minimum required outage probability at the passive eavesdroppers; and minimum required heterogeneous amounts of power transferred to the idle legitimate receivers. In light of the intractability of the problem, we reformulate the considered problem by replacing a non-convex probabilistic constraint with a convex deterministic constraint. Then, a semi-definite programming (SDP) relaxation approach is adopted to obtain the optimal solution for the reformulated problem. Furthermore, we propose a suboptimal resource allocation scheme with low computational complexity for providing communication secrecy and facilitating efficient energy transfer. Simulation results demonstrate the close-to-optimal performance of the proposed schemes and significant transmit power savings by optimization of the artificial noise and energy signal generation.

Multiuser MISO Beamforming for Simultaneous Wireless Information and Power Transfer

Abstract: This paper studies a multiuser multiple-input single-output (MISO) broadcast simultaneous wireless information and power transfer (SWIPT) system, where a multi-antenna access point (AP) sends wireless information and energy simultaneously via spatial multiplexing to multiple single-antenna receivers each of which implements information decoding (ID) or energy harvesting (EH). We aim to maximize the weighted sum-power transferred to all EH receivers subject to given minimum signal-to-interference-and-noise ratio (SINR) constraints at different ID receivers. In particular, we consider two types of ID receivers (referred to as Type I and Type II, respectively) without or with the capability of cancelling the interference from (a priori known) energy signals. For each type of ID receivers, we formulate the joint information and energy transmit beamforming design as a nonconvex quadratically constrained quadratic program (QCQP). First, we obtain the globally optimal solutions for our formulated QCQPs by applying an optimization technique so-called semidefinite relaxation (SDR). It is shown via SDR that under the condition of independently distributed user channels, no dedicated energy beam is used for the case of Type I ID receivers to achieve the optimal solution; while for the case of Type II ID receivers, employing no more than one energy beam is optimal. Next, we establish a new form of the celebrated uplink-downlink duality for our studied downlink beamforming problems, and thereby develop alternative algorithms to obtain the same optimal solutions as by SDR. Finally, numerical results are provided to evaluate the performance of proposed optimal beamforming designs for MISO SWIPT systems.

Base-Station Assisted Device-to-Device Communications for High-Throughput Wireless Video Networks

Abstract: We propose a new scheme for increasing the throughput of video files in cellular communications systems This scheme exploits (1) the redundancy of user requests as well as (2) the considerable storage capacity of smartphones and tablets Users cache popular video files and-after receiving requests from other users-serve these requests via device-to-device localized transmissions The file placement is optimal when a central control knows a priori the locations of wireless devices when file requests occur However, even a purely random caching scheme shows only a minor performance loss compared to such a “genie-aided” scheme We then analyze the optimal collaboration distance, trading off frequency reuse with the probability of finding a requested file within the collaboration distance We show that an improvement of spectral efficiency of one to two orders of magnitude is possible, even if there is not very high redundancy in video requests

Multi-Antenna Wireless Powered Communication With Energy Beamforming

Abstract: The newly emerging wireless powered communication networks (WPCNs) have recently drawn significant attention, where radio signals are used to power wireless terminals for information transmission. In this paper, we study a WPCN where one multi-antenna access point (AP) coordinates energy transfer and information transfer to/from a set of single-antenna users. A harvest-then-transmit protocol is assumed where the AP first broadcasts wireless power to all users via energy beamforming in the downlink (DL), and then, the users send their independent information to the AP simultaneously in the uplink (UL) using their harvested energy. To optimize the users' throughput and yet guarantee their rate fairness, we maximize the minimum throughput among all users by a joint design of the DL-UL time allocation, the DL energy beamforming, and the UL transmit power allocation, as well as receive beamforming. We solve this nonconvex problem optimally by two steps. First, we fix the DL-UL time allocation and obtain the optimal DL energy beamforming, UL power allocation, and receive beamforming to maximize the minimum signal-to-interference-plus-noise ratio of all users. This problem is shown to be still nonconvex; however, we convert it equivalently to a spectral radius minimization problem, which can be solved efficiently by applying the alternating optimization based on the nonnegative matrix theory. Then, the optimal time allocation is found by a one-dimensional search to maximize the minimum rate of all users. Furthermore, two suboptimal designs of lower complexity are also proposed, and their throughput performance is compared against that of the optimal solution.

Fundamental Limits of Caching in Wireless D2D Networks

Abstract: We consider a wireless Device-to-Device (D2D) network where communication is restricted to be single-hop. Users make arbitrary requests from a finite library of files and have pre-cached information on their devices, subject to a per-node storage capacity constraint. A similar problem has already been considered in an ``infrastructure'' setting, where all users receive a common multicast (coded) message from a single omniscient server (e.g., a base station having all the files in the library) through a shared bottleneck link. In this work, we consider a D2D ``infrastructure-less'' version of the problem. We propose a caching strategy based on deterministic assignment of subpackets of the library files, and a coded delivery strategy where the users send linearly coded messages to each other in order to collectively satisfy their demands. We also consider a random caching strategy, which is more suitable to a fully decentralized implementation. Under certain conditions, both approaches can achieve the information theoretic outer bound within a constant multiplicative factor. In our previous work, we showed that a caching D2D wireless network with one-hop communication, random caching, and uncoded delivery, achieves the same throughput scaling law of the infrastructure-based coded multicasting scheme, in the regime of large number of users and files in the library. This shows that the spatial reuse gain of the D2D network is order-equivalent to the coded multicasting gain of single base station transmission. It is therefore natural to ask whether these two gains are cumulative, i.e.,if a D2D network with both local communication (spatial reuse) and coded multicasting can provide an improved scaling law. Somewhat counterintuitively, we show that these gains do not cumulate (in terms of throughput scaling law).

IEEE 802.11ad: directional 60 GHz communication for multi-Gigabit-per-second Wi-Fi [Invited Paper]

Abstract: With the ratification of the IEEE 802.11ad amendment to the 802.11 standard in December 2012, a major step has been taken to bring consumer wireless communication to the millimeter wave band. However, multi-gigabit-per-second throughput and small interference footprint come at the price of adverse signal propagation characteristics, and require a fundamental rethinking of Wi-Fi communication principles. This article describes the design assumptions taken into consideration for the IEEE 802.11ad standard and the novel techniques defined to overcome the challenges of mm-Wave communication. In particular, we study the transition from omnidirectional to highly directional communication and its impact on the design of IEEE 802.11ad.

An energy efficient and spectrum efficient wireless heterogeneous network framework for 5G systems

Abstract: In this article we explore a system framework of cooperative green heterogeneous networks for 5G wireless communication systems. We first survey the state-of-the-art on spectrum efficiency (SE), energy efficiency (EE), and quality of service (QoS) based mobile association, multi-layer interference management and power control, network wide cooperation and dynamic resource allocation for heterogeneous wireless networks. We also present the system framework of cooperative green heterogeneous networks, which aims at balancing and optimizing SE, EE, and QoS in heterogeneous wireless networks. We discuss the design principles and show some preliminary performance results on the tradeoffs among SE, EE, and QoS. Finally, we identify the technical challenges that remain in the cooperative green heterogeneous network design. The presented wireless system framework is expected to advance the understandings of the critical technical issues toward energy and spectrum efficient 5G wireless communication systems.

Secrecy Wireless Information and Power Transfer With MISO Beamforming

Abstract: The dual use of radio signal for simultaneous wireless information and power transfer (SWIPT) has recently drawn significant attention. To meet the practical requirement that the energy receiver (ER) operates with significantly higher received power as compared to the conventional information receiver (IR), ERs need to be deployed in more proximity to the transmitter than IRs in the SWIPT system. However, due to the broadcast nature of wireless channels, one critical issue arises that the messages sent to IRs can be eavesdropped by ERs, which possess better channels from the transmitter. In this paper, we address this new physical-layer security problem in a multiuser multiple-input single-output (MISO) SWIPT system where one multi-antenna transmitter sends information and energy simultaneously to an IR and multiple ERs, each with one single antenna. Two problems are investigated with different practical aims: the first problem maximizes the secrecy rate for the IR subject to individual harvested energy constraints of ERs, while the second problem maximizes the weighted sum-energy transferred to ERs subject to a secrecy rate constraint for IR. We solve these two non-convex problems optimally by a general two-stage procedure. First, by fixing the signal-to-interference-plus-noise ratio (SINR) target for ERs or IR, we obtain the optimal transmit beamforming and power allocation solution by applying the technique of semidefinite relaxation (SDR). Then, each of the two problems is solved by a one-dimension search over the optimal SINR target for ERs or IR. Furthermore, for each problem, suboptimal solutions of lower complexity are proposed.

Cloud technologies for flexible 5G radio access networks

Abstract: The evolution toward 5G mobile networks will be characterized by an increasing number of wireless devices, increasing device and service complexity, and the requirement to access mobile services ubiquitously. Two key enablers will allow the realization of the vision of 5G: very dense deployments and centralized processing. This article discusses the challenges and requirements in the design of 5G mobile networks based on these two key enablers. It discusses how cloud technologies and flexible functionality assignment in radio access networks enable network densification and centralized operation of the radio access network over heterogeneous backhaul networks. The article describes the fundamental concepts, shows how to evolve the 3GPP LTE architecture, and outlines the expected benefits.

Optimal Resource Allocation in Full-Duplex Wireless-Powered Communication Network

Abstract: This paper studies optimal resource allocation in the wireless-powered communication network (WPCN), where one hybrid access point (H-AP) operating in full duplex (FD) broadcasts wireless energy to a set of distributed users in the downlink (DL) and, at the same time, receives independent information from the users via time-division multiple access in the uplink (UL). We design an efficient protocol to support simultaneous wireless energy transfer (WET) in the DL and wireless information transmission (WIT) in the UL for the proposed FD-WPCN. We jointly optimize the time allocations to the H-AP for DL WET and different users for UL WIT and the transmit power allocations over time at the H-AP to maximize the users' weighted sum rate of UL information transmission with harvested energy. We consider both the cases with perfect and imperfect self-interference cancellation (SIC) at the H-AP, for which we obtain optimal and suboptimal time and power allocation solutions, respectively. Furthermore, we consider the half-duplex (HD) WPCN as a baseline scheme and derive its optimal resource allocation solution. Simulation results show that the FD-WPCN outperforms the HD-WPCN when effective SIC can be implemented and more stringent peak power constraint is applied at the H-AP.