This survey presents an overview of recent advances in the state of the art for computer-aided design (CAD) tools for analog and mixed-signal integrated circuits (ICs). Analog blocks typically constitute only a small fraction of the components on mixed-signal ICs and emerging systems-on-a-chip (SoC) designs. But due to the increasing levels of integration available in silicon technology and the growing requirement for digital systems to communicate with the continuous-valued external world, there is a growing need for CAD tools that increase the design productivity and improve the quality of analog integrated circuits. This paper describes the motivation and evolution of these tools and outlines progress on the various design problems involved: simulation and modeling, symbolic analysis, synthesis and optimization, layout generation, yield analysis and design centering, and test. This paper summarizes the problems for which viable solutions are emerging and those which are still unsolved.

/pdf/computer-aided-design-of-analog-and-mixed-signal-integrated-23xbvj9rc2.pdf

Computer-aided design of analog and mixed-signal integrated circuits

A methodology for the automatic synthesis of full-custom IC layout with analog constraints is presented. The methodology guarantees that all performance constraints are met when feasible, or otherwise, infeasibility is detected as soon as possible, thus providing a robust and efficient design environment. In the proposed approach, performance specifications are translated into lower-level bounds on parasitics or geometric parameters, using sensitivity analysis. Bounds can be used by a set of specialized layout tools performing stack generation, placement, routing, and compaction. For each tool, a detailed description is provided of its functionality, of the way constraints are mapped and enforced, and of its impact on the design flow. Examples drawn from industrial applications are reported to illustrate the effectiveness of the approach.

Automation of IC layout with analog constraints

Digital synthesis tools such as logic synthesis and semicustom layout have dramatically changed both the frontend (specification to netlist) and backend (netlist to mask) steps of the digital IC design process. In this tutorial, we look at the last decade's worth of progress on analog circuit synthesis and layout tools. We focus on the frontend and backend of analog and mixed-signal IC design flows. The tutorial summarizes the problems for which viable solutions are emerging, and those which are still unsolved.

/pdf/synthesis-tools-for-mixed-signal-ics-progress-on-frontend-1dck420mup.pdf

Synthesis tools for mixed-signal ICs: progress on frontend and backend strategies

Domino logic is one of the most popular dynamic circuit configurations for implementing high-performance logic designs. Since domino logic is inherently noninverting, it presents a fundamental constraint of implementing logic functions without any intermediate inversions. Removal of intermediate inverters requires logic duplication for generating both the negative and positive signal phases, which results in significant area overhead. This area overhead can be substantially reduced by selecting an optimal output phase assignment, which results in a minimum logic duplication penalty for obtaining inverter-free logic. In this paper, we present this previously unaddressed problem of output phase assignment for minimum area duplication in dynamic logic synthesis. We give both optimal and heuristic algorithms for minimizing logic duplication.

/pdf/logic-optimization-by-output-phase-assignment-in-dynamic-5aayyvhzl5.pdf

Logic optimization by output phase assignment in dynamic logic synthesis

Layout for analog circuits has historically been a time consuming, manual, trial-and-error task. The problem is not so much the size (in terms of the number of active devices) of these designs, but rather the plethora of possible circuit and device interactions: from the chip substrate, from the devices and interconnects themselves, from the chip package. In this short survey we enumerate briefly the basic problems faced by those who need to do layout for analog and mixed-signal designs, and survey the evolution of the design tools and geometric/electrical optimization algorithms that have been directed at these problems.

Layout tools for analog ICs and mixed-signal SoCs: a survey

An algorithm for the automatic generation of full-stacked layouts in CMOS analog circuits is described in this paper. The set of stacks obtained is optimum with respect to a cost function which accounts for critical parasitics and device area minimization. Device interleaving and common-centroid patterns are automatically introduced when possible, and all symmetry and matching constraints are enforced. The algorithm is based on operations performed on a graph representation of circuit connectivity, exploiting the equivalence between stack generation and path partitioning in the circuit graph. Path partitioning is carried out in two phases: in the first phase, all paths are generated by a dynamic programming procedure. In the second phase, the optimum partition is selected by solving a clique problem. Original heuristics have been introduced, which preserve the optimality of the solution, while effectively improving the computational efficiency of the algorithm. The algorithm has been implemented in the "C" programming language. Many test cases have been run, and the quality of results is comparable to that of hand-made circuits. Results also demonstrate the effectiveness of the heuristics employed, even for relatively complex circuits. >

D. Pandini

Papers

Optimum CMOS stack generation with analog constraints