Atmospheric-pressure plasmas are used in a variety of materials processes. Traditional sources include transferred arcs, plasma torches, corona discharges, and dielectric barrier discharges. In arcs and torches, the electron and neutral temperatures exceed 3000/spl deg/C and the densities of charge species range from 10/sup 16/-10/sup 19/ cm/sup -3/. Due to the high gas temperature, these plasmas are used primarily in metallurgy. Corona and dielectric barrier discharges produce nonequilibrium plasmas with gas temperatures between 50-400/spl deg/C and densities of charged species typical of weakly ionized gases. However, since these discharges are nonuniform, their use in materials processing is limited. Recently, an atmospheric-pressure plasma jet has been developed, which exhibits many characteristics of a conventional, low-pressure glow discharge. In the jet, the gas temperature ranges from 25-200/spl deg/C, charged-particle densities are 10/sup 11/-10/sup 12/ cm/sup -3/, and reactive species are present in high concentrations, i.e., 10-100 ppm. Since this source may be scaled to treat large areas, it could be used in applications which have been restricted to vacuum. In this paper, the physics and chemistry of the plasma jet and other atmospheric-pressure sources are reviewed.

/pdf/the-atmospheric-pressure-plasma-jet-a-review-and-comparison-4n3xn1jiyb.pdf

The atmospheric-pressure plasma jet: a review and comparison to other plasma sources

The term plasma actuator has now been a part of the fluid dynamics flow-control vernacular for more than a decade. A particular type of plasma actuator that has gained wide use is based on a single–dielectric barrier discharge (SDBD) mechanism that has desirable features for use in air at atmospheric pressures. For these actuators, the mechanism of flow control is through a generated body-force vector field that couples with the momentum in the external flow. The body force can be derived from first principles, and the effect of plasma actuators can be easily incorporated into flow solvers so that their placement and operation can be optimized. They have been used in a wide range of internal and external flow applications. Although initially considered useful only at low speeds, plasma actuators are effective in a number of applications at high subsonic, transonic, and supersonic Mach numbers, owing largely to more optimized actuator designs that were developed through better understanding and modeling of...

Dielectric Barrier Discharge Plasma Actuators for Flow Control

Gas sensors operate by a variety of fundamentally different mechanisms1,2,3,4,5,6,7,8,9,10,11,12,13,14. Ionization sensors13,14 work by fingerprinting the ionization characteristics of distinct gases, but they are limited by their huge, bulky architecture, high power consumption and risky high-voltage operation. Here we report the fabrication and successful testing of ionization microsensors featuring the electrical breakdown of a range of gases and gas mixtures at carbon nanotube tips. The sharp tips of nanotubes generate very high electric fields at relatively low voltages, lowering breakdown voltages several-fold in comparison to traditional electrodes, and thereby enabling compact, battery-powered and safe operation of such sensors. The sensors show good sensitivity and selectivity, and are unaffected by extraneous factors such as temperature, humidity, and gas flow. As such, the devices offer several practical advantages over previously reported nanotube sensor systems15,16,17. The simple, low-cost, sensors described here could be deployed for a variety of applications, such as environmental monitoring, sensing in chemical processing plants, and gas detection for counter-terrorism.

/pdf/miniaturized-gas-ionization-sensors-using-carbon-nanotubes-59fz6qz9fs.pdf

Miniaturized gas ionization sensors using carbon nanotubes

There has been considerable interest in non-thermal atmospheric pressure discharges over the past decade due to the increased number of industrial applications. Diverse applications demand a solid physical and chemical understanding of the operational principals of such discharges. This paper focuses on the four most important and widely used varieties of non-thermal discharges: corona, dielectric barrier, gliding arc and spark discharge. The physics of these discharges is closely related to the breakdown phenomena. The main players in electrical breakdown of gases: avalanches and streamers are also discussed in this paper. Although non-thermal atmospheric pressure discharges have been intensively studied for the past century, a clear physical picture of these discharges is yet to be obtained.

https://iopscience.iop.org/article/10.1088/0022-3727/38/2/R01/pdf

Non-thermal atmospheric pressure discharges

This Review discusses ionic electrets: their preparation, their mechanisms of formation, tools for their characterization, and their applications. An electret is a material that has a permanent, macroscopic electric field at its surface; this field can arise from a net orientation of polar groups in the material, or from a net, macroscopic electrostatic charge on the material. An ionic electret is a material that has a net electrostatic charge due to a difference in the number of cationic and anionic charges in the material. Any material that has ions at its surface, or accessible in its interior, has the potential to become an ionic electret. When such a material is brought into contact with some other material, ions can transfer between them. If the anions and cations have different propensities to transfer, the unequal transfer of these ions can result in a net transfer of charge between the two materials. This Review focuses on the experimental evidence and theoretical models for the formation of ionic electrets through this ion-transfer mechanism, and proposes--as a still-unproved hypothesis--that this ion-transfer mechanism may also explain the ubiquitous contact electrification ("static electricity") of materials, such as organic polymers, that do not explicitly have ions at their surface.

Electrostatic Charging Due to Separation of Ions at Interfaces: Contact Electrification of Ionic Electrets

A collection of individual works on electrical discharges is presented. Topics covered include: fundamental processes in the electrical breakdown of gases; vacuum breakdown; spark breakdown in uniform fields; corona discharge; spark breakdown in non-uniform fields; breakdown voltage characteristics; irradiation and time lags; high-frequency breakdown of gases; laser-induced electrical breakdown of gases; spark channels; and electrode phenomena. (GHT)

John M. Meek

Papers

Electrical breakdown of gases