Fused deposition modelling (FDM) is one of the fastest-growing additive manufacturing methods used in printing fibre-reinforced composites (FRC). The performances of the resulting printed parts are limited compared to those by other manufacturing methods due to their inherent defects. Hence, the effort to develop treatment methods to overcome these drawbacks has accelerated during the past few years. The main focus of this study is to review the impact of those defects on the mechanical performance of FRC and therefore to discuss the available treatment methods to eliminate or minimize them in order to enhance the functional properties of the printed parts. As FRC is a combination of polymer matrix material and continuous or short reinforcing fibres, this review will thoroughly discuss both thermoplastic polymers and FRCs printed via FDM technology, including the effect of printing parameters such as layer thickness, infill pattern, raster angle and fibre orientation. The most common defects on printed parts, in particular, the void formation, surface roughness and poor bonding between fibre and matrix, are explored. An inclusive discussion on the effectiveness of chemical, laser, heat and ultrasound treatments to minimize these drawbacks is provided by this review.

FDM-Based 3D Printing of Polymer and Associated Composite: A Review on Mechanical Properties, Defects and Treatments.

https://spiral.imperial.ac.uk/bitstream/10044/1/73026/9/1-s2.0-S0264127519306021-main.pdf

Review on design and structural optimisation in additive manufacturing: Towards next-generation lightweight structures

Stereolithography is a solid freeform technique (SFF) that was introduced in the late 1980s Although many other techniques have been developed since then, stereolithography remains one of the most powerful and versatile of all SFF techniques It has the highest fabrication accuracy and an increasing number of materials that can be processed is becoming available In this paper we discuss the characteristic features of the stereolithography technique and compare it to other SFF techniques The biomedical applications of stereolithography are reviewed, as well as the biodegradable resin materials that have been developed for use with stereolithography Finally, an overview of the application of stereolithography in preparing porous structures for tissue engineering is given

A review on stereolithography and its applications in biomedical engineering

An Introduction to Composite Materials: Fabrication

A critical review on 3D printed continuous fiber-reinforced composites: History, mechanism, materials and properties

In the last few years, utilizing fiber reinforced additive manufacturing (FRAM)-based components in several industries has become quite popular. Compared to conventional AM technologies, FRAM offered complementary solutions to their needs. In general, fibers have been traditionally used in many manufacturing processes for various reasons. However, using conventional methods, there are obstacles in obtaining the desired complex geometries and low setup costs. AM offers possible avoidance of these limitations. Shape complexity, infill density, and manufacturing lead times are no longer barriers. Bridging AM with fiber reinforced materials offers a vast opportunity for lightweight and strong parts. Depending on the affinity, fibers with different structures can be mixed with different matrix materials and, thus, create stronger parts with improved mechanical properties. Process parameters like raster angle, infill speed, layer thickness, and nozzle temperature also strongly impact physical properties of FRAM products and are considered carefully. FRAM-based components are used in many industries such as aerospace, motorsports, and biomedicine, where the weight, strength, and complexity of parts are critical. Hence, numerous industrial companies and research facilities are investigating the implementation and adaptation of FRAM to their requirements. Studies are generally conducted on new materials, new FRAM technologies, the effect of fiber orientations and fraction on the performance of parts, improving the printing parameters, and other subjects. This study reports the current trends and challenges that FRAM is bringing to AM ecosystem.

The trends and challenges of fiber reinforced additive manufacturing

Effects of ultrasonic vibrations on mechanical properties of fiber reinforced plastics were investigated during molding resin impregnation process in vacuum assisted resin transfer molding. The vacuum bag including the preformed each non-crimp fabrics (carbon and glass fibers) was placed in a water bath of an ultrasonic wave generator during resin impregnation. The mechanical properties of the laminates were evaluated through the mechanical strength tests and scanning electron microscope (SEM) observation. The results revealed that ultrasonic waves improved transverse tensile, flexural, interlaminar shear, and compressive strengths of the carbon fiber (CF) laminates and interlaminar shear and compressive strengths of the glass fiber (GF) laminates. It was found from SEM observation that the fracture modes of the CF and GF laminates processed using ultrasonic waves were resin fracture. Accordingly, the adhesion of the fiber/resin interface was improved by oscillating ultrasonic vibration during resin impregnation, leading to an increase of the interface strength.

/pdf/effects-of-ultrasonic-waves-during-resin-impregnation-on-the-30y3m31l1b.pdf

Norimichi Nanami

Papers

The trends and challenges of fiber reinforced additive manufacturing

Effects of Ultrasonic Waves during Resin Impregnation on the Mechanical Properties of Unidirectional Composite Materials