A critical review on biochar for enhancing biogas production from anaerobic digestion of food waste and sludge

Progress on the lignocellulosic biomass pyrolysis for biofuel production toward environmental sustainability

This paper reports the progress of catalysts for improving the hydrocarbon compounds in bio-oil obtained from catalytic pyrolysis of biomass. In addition, the effects of the other operating conditions, such as temperature, type of biomass, heating rate, vapors residence time, carrier gas, and hydrogen donor on the yield and properties of bio-oil have been briefly explored. Temperature and catalysts type were found to have major impact on the bio-oil yield and quality. TGA-DTA analysis of biomass revealed that major biomasses pyrolysis zone for high bio-oil yield is in the range of 400–600 °C. Pilot, semi-pilot and large-scale units reported an average temperature of 500 °C for pyrolysis of biomass. The development of advanced catalysts such as zeolite-based catalysts, supported transition and noble metal catalysts, and metal oxide catalysts have been designed to remove the undesired compounds and to increase the hydrocarbon yield in bio-oil. Noble metal supported catalysts produced bio-oil with a low content of oxygenated compounds compared to non-noble metal catalysts; however, their cost and accessibility favor the utilization of non-noble metal supported catalysts.

Recent advances on catalysts for improving hydrocarbon compounds in bio-oil of biomass catalytic pyrolysis

Valorisation possibilities of exhausted biosorbents loaded with metal ions – A review

Anaerobic digestion (AD) could be considered as a mature technology and nowadays it can still play a pivot role because of the urgent need to provide renewable energy sources and efficiently manage the continuously growing amount of organic waste. Biochar (BC) is an extremely versatile material, which could be produced by carbonization of organic materials, including biomass and wastes, consistently with Circular Economy principles, and “tailor-made” for specific applications. The potential BC role as additive in the control of the many well-known critical issues of AD processes has been increasingly explored over the past few years. However, a clear and comprehensive understanding of the connections between BC and AD is still missing. This review paper analyses and discusses significant references (review articles, research papers and international databases and reports), mostly published in the last 10 years. This review is aimed at addressing three key issues related to the better understanding of the BC role in AD processes: 1. Investigation of the influence of BC properties on AD performances and of their ability to counteract its main challenges; 2. Assessment of the optimal BC production chain (i.e. feedstock-pyrolysis-activation) to achieve the desired features; 3. Evaluation of the economic and environmental advantages connected to BC use in AD processes, compared to conventional solutions applied to address AD challenges.

/pdf/review-of-biochar-role-as-additive-in-anaerobic-digestion-3kp03atf52.pdf

Raquel Escrivani Guedes

Papers

Operating parameters for bio-oil production in biomass pyrolysis: A review