There is considerable pressure to define the key requirements of 5G, develop 5G standards, and perform technology trials as quickly as possible. Normally, these activities are best done in series but there is a desire to complete these tasks in parallel so that commercial deployments of 5G can begin by 2020. 5G will not be an incremental improvement over its predecessors; it aims to be a revolutionary leap forward in terms of data rates, latency, massive connectivity, network reliability, and energy efficiency. These capabilities are targeted at realizing high-speed connectivity, the Internet of Things, augmented virtual reality, the tactile internet, and so on. The requirements of 5G are expected to be met by new spectrum in the microwave bands (3.3-4.2 GHz), and utilizing large bandwidths available in mm-wave bands, increasing spatial degrees of freedom via large antenna arrays and 3-D MIMO, network densification, and new waveforms that provide scalability and flexibility to meet the varying demands of 5G services. Unlike the one size fits all 4G core networks, the 5G core network must be flexible and adaptable and is expected to simultaneously provide optimized support for the diverse 5G use case categories. In this paper, we provide an overview of 5G research, standardization trials, and deployment challenges. Due to the enormous scope of 5G systems, it is necessary to provide some direction in a tutorial article, and in this overview, the focus is largely user centric, rather than device centric. In addition to surveying the state of play in the area, we identify leading technologies, evaluating their strengths and weaknesses, and outline the key challenges ahead, with research test beds delivering promising performance but pre-commercial trials lagging behind the desired 5G targets.

5G : A tutorial overview of standards, trials, challenges, deployment, and practice

This document provides updates to IEEE Std 802.16's MIB for the MAC, PHY and asso- ciated management procedures in order to accommodate recent extensions to the standard.

IEEE Standard for Local and Metropolitan Area Networks Part 16: Air Interface for Fixed Broadband Wireless Access Systems Draft Amendment: Management Information Base Extensions

This tutorial presents an overview of the technological advances in millimeter-wave (mm-wave) circuit components, antennas, and propagation that will soon allow 60-GHz transceivers to provide multigigabit per second (multi-Gb/s) wireless communication data transfers in the consumer marketplace. Our goal is to help engineers understand the convergence of communications, circuits, and antennas, as the emerging world of subterahertz and terahertz wireless communications will require understanding at the intersections of these areas. This paper covers trends and recent accomplishments in a wide range of circuits and systems topics that must be understood to create massively broadband wireless communication systems of the future. In this paper, we present some evolving applications of massively broadband wireless communications, and use tables and graphs to show research progress from the literature on various radio system components, including on-chip and in-package antennas, radio-frequency (RF) power amplifiers (PAs), low-noise amplifiers (LNAs), voltage-controlled oscillators (VCOs), mixers, and analog-to-digital converters (ADCs). We focus primarily on silicon-based technologies, as these provide the best means of implementing very low-cost, highly integrated 60-GHz mm-wave circuits. In addition, the paper illuminates characterization techniques that are required to competently design and fabricate mm-wave devices in silicon, and illustrates effects of the 60-GHz RF propagation channel for both in-building and outdoor use. The paper concludes with an overview of the standardization and commercialization efforts for 60-GHz multi-Gb/s devices, and presents a novel way to compare the data rate versus power efficiency for future broadband devices.

http://faculty.poly.edu/~tsr/wp-content/uploads/publications/abstract17.pdf

State of the Art in 60-GHz Integrated Circuits and Systems for Wireless Communications

Millimeter wave (mmWave) communications have recently attracted large research interest, since the huge available bandwidth can potentially lead to the rates of multiple gigabit per second per user Though mmWave can be readily used in stationary scenarios, such as indoor hotspots or backhaul, it is challenging to use mmWave in mobile networks, where the transmitting/receiving nodes may be moving, channels may have a complicated structure, and the coordination among multiple nodes is difficult To fully exploit the high potential rates of mmWave in mobile networks, lots of technical problems must be addressed This paper presents a comprehensive survey of mmWave communications for future mobile networks (5G and beyond) We first summarize the recent channel measurement campaigns and modeling results Then, we discuss in detail recent progresses in multiple input multiple output transceiver design for mmWave communications After that, we provide an overview of the solution for multiple access and backhauling, followed by the analysis of coverage and connectivity Finally, the progresses in the standardization and deployment of mmWave for mobile networks are discussed

Millimeter Wave Communications for Future Mobile Networks

The remarkable growth of wireless data traffic in recent times has driven the need to explore suitable regions in the radio spectrum to meet the projected requirements. In pursuance of this, millimeter wave communications have received considerable attention in the research fraternity. Due to the high path and penetration losses at millimeter wavelengths, antenna beamforming assumes a pivotal role in establishing and maintaining a robust communication link. Beamforming for millimeter wave communications poses a multitude of diverse challenges due to the large channel bandwidth, unique channel characteristics, and hardware constraints. In this paper, we track the evolution and advancements in antenna beamforming for millimeter wave communications in the context of the distinct requirements for indoor and outdoor communication scenarios. We expand the scope of discussion by including the developments in radio frequency system design and implementation for millimeter wave beamforming. We explore the suitability of millimeter wave beamforming methods, both, existing and proposed till midyear 2015, and identify the exciting new prospects unfolding in this domain.

Beamforming for Millimeter Wave Communications: An Inclusive Survey

This paper presents the results of an experimental investigation of 60 GHz wireless local area network (WLAN) systems in an office environment. The measurement setup with highly directional mechanically steerable antennas and 800 MHz bandwidth was developed and experiments were performed for conference room and cubicle environments. Measurement results demonstrate that the 60 GHz propagation channel is quasioptical in nature and received signal power is obtained through line of sight (LOS) and reflected signal paths of the first and second orders. The 60 GHz WLAN system prototype using steerable directional antennas with 18 dB gain was able to achieve about 30 dB baseband SNR for LOS transmission, about 15-20 dB for communications through the first-order reflected path, and 2-6 dB SNR when using second-order reflection for the office environments. The intra cluster statistical parameters of the propagation channel were evaluated and a statistical model for reflected clusters is proposed. Experimental results demonstrating strong polarization impact on the characteristics of the propagation channel are presented. Cross-polarization discrimination (XPD) of the propagation channel was estimated as approximately 20 dB for LOS transmission and 10-20 dB for NLOS reflected paths.

Experimental investigations of 60 GHz WLAN systems in office environment

Transmissions in different cells of a time-division duplex system are typically synchronous in order to eliminate the base station-to-base station and terminal-to-terminal interference. The synchronous operation limits dynamic resource configuration for downlink and uplink transmissions. Today, as a large percentage of mobile traffic is generated in hotspots and indoor environments, heterogeneous networks comprising high-power/wide-area and low-power/local-area network nodes are becoming a reality. Such heterogeneous networks provide opportunities to exploit dynamic uplink-downlink configuration in TDD systems, adapting to the individual traffic needs of a specific cell area. This article presents a tutorial overview of dynamic uplink-downlink configuration and interference management in time-division Long Term Evolution, including motivations, target deployment scenarios, opportunities and challenges, system requirements, design aspects, and performance evaluations.

Dynamic uplink-downlink configuration and interference management in TD-LTE

Statistical Channel Model for 60 GHz WLAN Systems in Conference Room Environment

The novel CORDIC-based architecture of the triangular systolic array for QRD of large size complex matrices is presented. The proposed architecture relies on QRD using a three angle complex rotation approach that provides significant reduction of latency (systolic operation time) and makes the QRD in such a way that the upper triangular matrix R has only real diagonal elements.

Triangular systolic array with reduced latency for QR-decomposition of complex matrices

In this work, a methodology of statistical channel modeling for 60 GHz WLAN systems is proposed and a channel model for the office conference room environment is developed. The proposed methodology takes into account the most important properties of the indoor 60 GHz propagation channel such as large propagation loss and necessity to use steerable directional antennas by the WLAN stations, quasi-optical propagation nature, clustering of the channel, and significant impact of the polarization characteristics. A general mathematical structure of the channel model that supports all the above 60 GHz propagation channel properties is presented. The application of the proposed methodology is demonstrated by development of a channel model for the conference room environment. Inter cluster, intra cluster, and polarization modeling characteristics are defined in accordance with the proposed methodology and using results of experiments and ray-tracing simulations.

A. Khoryaev

Papers

Experimental investigations of 60 GHz WLAN systems in office environment

Dynamic uplink-downlink configuration and interference management in TD-LTE

Statistical Channel Model for 60 GHz WLAN Systems in Conference Room Environment

Triangular systolic array with reduced latency for QR-decomposition of complex matrices

Statistical channel model for 60 GHz WLAN systems in conference room environment