Progressive freezing is a solvent purification technology with low energy requirements and high concentration efficiency. Although these advantages make it a promising technology, the technique has never been explored for draw solution recovery for forward osmosis (FO). Hence, in this study, the progressive freezing process was used to concentrate three common diluted draw solutions: NaCl, MgCl2, and EDTA-2Na with different ice front speeds, stirring rates, and initial draw solution concentrations. Effective partition and intrinsic partition constants were also evaluated. The results reveal that the freezing process can achieve a draw solution recovery rate of 99.73%, 99.06%, and 98.65% with NaCl, MgCl2, and EDTA-2Na, respectively, using an ice front speed of 0.5 cm/h, a stirring rate of 2.62 m/s, and 30% of percentage of ice phase. Higher concentration efficiency for NaCl and MgCl2 was achieved due to the high solubility of NaCl and MgCl2 increased solute diffusion into the liquid phase solutions. The concentration factors for all three draw solutions exceeded 1.9, indicating that the draw solutes could be reused for the FO process. In addition, the two mass transfer coefficients depended on the ice front speed and the stirring rates were also obtained for scaling up the experiment in the future.

Application of progressive freezing on forward osmosis draw solute recovery.

The world is still suffering from a shortage of clean water supply and the problem is expected to become more serious in the future. Consequently, researchers have been trying to find the best solution to address this problem by introducing new desalination technologies that are able to accommodate the demand for clean water which is increasing from time to time. One of the new technologies introduced is the desalination of seawater through freeze concentration. In this study, progressive freeze concentration (PFC) is implemented to produce pure water in the form of ice crystal block and leave behind a higher concentration solution. The effect of coolant temperature was investigated and the efficiency of the system was reviewed based on the value of effective partition constant, K which is defined by the ratio of solute in ice and liquid phase. The low value of K leads to the best efficiency for the system. Apart from that, the efficiency, E% and salinity reduction were also calculated in order to determine the system performance.

https://akademiabaru.com/wvcarmea/docu/127.pdf

Ab. Hamid Farah Hanim

Papers

Effect of Coolant Temperature on Desalination Process via Progressive Freeze Concentration