Although Kraken’s k-mer-based approach provides a fast taxonomic classification of metagenomic sequence data, its large memory requirements can be limiting for some applications. Kraken 2 improves upon Kraken 1 by reducing memory usage by 85%, allowing greater amounts of reference genomic data to be used, while maintaining high accuracy and increasing speed fivefold. Kraken 2 also introduces a translated search mode, providing increased sensitivity in viral metagenomics analysis.

/pdf/improved-metagenomic-analysis-with-kraken-2-52i6sij3fo.pdf

Improved metagenomic analysis with Kraken 2.

Phosphoenolpyruvate:carbohydrate phosphotransferase systems of bacteria.

Utilization of polymers as biomaterials has greatly impacted the advancement of modern medicine. Specifically, polymeric biomaterials that are biodegradable provide the significant advantage of being able to be broken down and removed after they have served their function. Applications are wide ranging with degradable polymers being used clinically as surgical sutures and implants. In order to fit functional demand, materials with desired physical, chemical, biological, biomechanical and degradation properties must be selected. Fortunately, a wide range of natural and synthetic degradable polymers has been investigated for biomedical applications with novel materials constantly being developed to meet new challenges. This review summarizes the most recent advances in the field over the past 4 years, specifically highlighting new and interesting discoveries in tissue engineering and drug delivery applications.

/pdf/biomedical-applications-of-biodegradable-polymers-2db9gcyzxw.pdf

Biomedical Applications of Biodegradable Polymers

The cell wall envelope of gram-positive bacteria is a macromolecular, exoskeletal organelle that is assembled and turned over at designated sites. The cell wall also functions as a surface organelle that allows gram-positive pathogens to interact with their environment, in particular the tissues of the infected host. All of these functions require that surface proteins and enzymes be properly targeted to the cell wall envelope. Two basic mechanisms, cell wall sorting and targeting, have been identified. Cell well sorting is the covalent attachment of surface proteins to the peptidoglycan via a C-terminal sorting signal that contains a consensus LPXTG sequence. More than 100 proteins that possess cell wall-sorting signals, including the M proteins of Streptococcus pyogenes, protein A of Staphylococcus aureus, and several internalins of Listeria monocytogenes, have been identified. Cell wall targeting involves the noncovalent attachment of proteins to the cell surface via specialized binding domains. Several of these wall-binding domains appear to interact with secondary wall polymers that are associated with the peptidoglycan, for example teichoic acids and polysaccharides. Proteins that are targeted to the cell surface include muralytic enzymes such as autolysins, lysostaphin, and phage lytic enzymes. Other examples for targeted proteins are the surface S-layer proteins of bacilli and clostridia, as well as virulence factors required for the pathogenesis of L. monocytogenes (internalin B) and Streptococcus pneumoniae (PspA) infections. In this review we describe the mechanisms for both sorting and targeting of proteins to the envelope of gram-positive bacteria and review the functions of known surface proteins.

Surface Proteins of Gram-Positive Bacteria and Mechanisms of Their Targeting to the Cell Wall Envelope

The phosphoenolpyruvate(PEP):carbohydrate phosphotransferase system (PTS) is found only in bacteria, where it catalyzes the transport and phosphorylation of numerous monosaccharides, disaccharides, amino sugars, polyols, and other sugar derivatives. To carry out its catalytic function in sugar transport and phosphorylation, the PTS uses PEP as an energy source and phosphoryl donor. The phosphoryl group of PEP is usually transferred via four distinct proteins (domains) to the transported sugar bound to the respective membrane component(s) (EIIC and EIID) of the PTS. The organization of the PTS as a four-step phosphoryl transfer system, in which all P derivatives exhibit similar energy (phosphorylation occurs at histidyl or cysteyl residues), is surprising, as a single protein (or domain) coupling energy transfer and sugar phosphorylation would be sufficient for PTS function. A possible explanation for the complexity of the PTS was provided by the discovery that the PTS also carries out numerous regulatory functions. Depending on their phosphorylation state, the four proteins (domains) forming the PTS phosphorylation cascade (EI, HPr, EIIA, and EIIB) can phosphorylate or interact with numerous non-PTS proteins and thereby regulate their activity. In addition, in certain bacteria, one of the PTS components (HPr) is phosphorylated by ATP at a seryl residue, which increases the complexity of PTS-mediated regulation. In this review, we try to summarize the known protein phosphorylation-related regulatory functions of the PTS. As we shall see, the PTS regulation network not only controls carbohydrate uptake and metabolism but also interferes with the utilization of nitrogen and phosphorus and the virulence of certain pathogens.

How Phosphotransferase System-Related Protein Phosphorylation Regulates Carbohydrate Metabolism in Bacteria

Bacillus anthracis, Bacillus cereus, and Bacillus thuringiensis are members of the Bacillus cereus group of bacteria, demonstrating widely different phenotypes and pathological effects. B. anthracis causes the acute fatal disease anthrax and is a potential biological weapon due to its high toxicity. B. thuringiensis produces intracellular protein crystals toxic to a wide number of insect larvae and is the most commonly used biological pesticide worldwide. B. cereus is a probably ubiquitous soil bacterium and an opportunistic pathogen that is a common cause of food poisoning. In contrast to the differences in phenotypes, we show by multilocus enzyme electrophoresis and by sequence analysis of nine chromosomal genes that B. anthracis should be considered a lineage of B. cereus. This determination is not only a formal matter of taxonomy but may also have consequences with respect to virulence and the potential of horizontal gene transfer within the B. cereus group.

Bacillus anthracis, Bacillus cereus, and Bacillus thuringiensis—One Species on the Basis of Genetic Evidence

Poly-gamma-glutamate (PGA), a natural polymer, is synthesized by several bacteria (all Gram-positive), one archaea and one eukaryote. PGA has diverse biochemical properties, enabling it to play different roles, depending on the organism and its environment. Indeed, PGA allows bacteria to survive at high salt concentrations and may also be involved in virulence. The minimal gene sets required for PGA synthesis were recently defined. There are currently two nomenclatures depending on the PGA final status: cap, for 'capsule', when PGA is surface associated or pgs, for 'polyglutamate synthase', when PGA is released. The minimal gene sets contain four genes termed cap or pgs B, C, A and E. The PGA synthesis complex is membrane-anchored and uses glutamate and ATP as substrates. Schematically, the reaction may be divided into two steps, PGA synthesis and PGA transport through the membrane. PGA synthesis depends primarily on CapB-CapC (or PgsB-PgsC), whereas PGA transport requires the presence, or the addition, of CapA-CapE (or PgsAA-PgsE). The synthesis complex is probably responsible for the stereochemical specificity of PGA composition. Finally, PGA may be anchored to the bacterial surface or released. An additional enzyme is involved in this reaction: either CapD, a gamma-glutamyl-transpeptidase that catalyses anchorage of the PGA, or PgsS, a hydrolase that facilitates release. The anchoring of PGA to the bacterial surface is important for virulence. All cap genes are therefore potential targets for inhibitors specifically blocking PGA synthesis or anchorage.

/pdf/poly-gamma-glutamate-in-bacteria-4sh87eegq8.pdf

Poly-gamma-glutamate in bacteria

Several bacterial proteins are non-covalently anchored to the cell surface via an S-layer homology (SLH) domain. Previous studies have suggested that this cell surface display mechanism involves a non-covalent interaction between the SLH domain and peptidoglycan-associated polymers. Here we report the characterization of a two-gene operon, csaAB, for cell surface anchoring, in Bacillus anthracis. Its distal open reading frame (csaB) is required for the retention of SLH-containing proteins on the cell wall. Biochemical analysis of cell wall components showed that CsaB was involved in the addition of a pyruvyl group to a peptidoglycan-associated polysaccharide fraction, and that this modification was necessary for binding of the SLH domain. The csaAB operon is present in several bacterial species that synthesize SLH-containing proteins. This observation and the presence of pyruvate in the cell wall of the corresponding bacteria suggest that the mechanism described in this study is widespread among bacteria.

Bacterial SLH domain proteins are non‐covalently anchored to the cell surface via a conserved mechanism involving wall polysaccharide pyruvylation

Summary
Bacillus anthracis, the aetiological agent of anthrax, is a Gram-positive spore-forming bacterium. The cell wall of vegetative cells of B. anthracis is surrounded by an S-layer. An array remained when sap, a gene described as encoding an S-layer component, was deleted. The remaining S-layer component, termed EA1, is chromosomally encoded. The gene encoding EA1 (eag) was obtained on two overlapping fragments in Escherichia coli and shown to be contiguous to the sap gene. The EA1 amino acid sequence, deduced from the eag nucleotide sequence, shows classical S-layer protein features (no cysteine, only 0.1% methionine, 10% lysine, and a weakly acidic pi). Similar to Sap and other Gram-positive surface proteins, EA1 has three 'S-layer-homology’motifs immediately downstream from a signal peptide. Single- and double-disrupted mutants were constructed. EA1 and Sap were co-localized at the cell surface of the wild-type bacilli. However, EA1 was more tightly bound than Sap to the bacteria. Electron microscopy studies and in vivo experiments with the constructed mutants showed that EA1 constitutes the main lattice of the B. anthracis S-layer, and is the major cell-associated antigen.

https://www.onlinelibrary.wiley.com/doi/pdf/10.1046/j.1365-2958.1997.2941659.x

Molecular characterization of the Bacillus anthracis main S‐layer component: evidence that it is the major cell‐associated antigen

Several examples of bacterial surface-structure anchoring have been described, but they do not include polyglutamate capsule. Bacillus anthracis capsule, which is composed only of poly-gamma- d-glutamate, is one of the two major virulence factors of the bacterium. We analysed its anchoring. We report that the polyglutamate is anchored directly to the peptidoglycan and that the bond is covalent. We constructed a capD mutant strain, capD being the fourth gene of the capsule biosynthetic operon. The mutant bacilli are surrounded by polyglutamate material that is not covalently anchored. Thus, CapD is required for the covalent anchoring of polyglutamate to the peptidoglycan. Sequence similarities suggest that CapD is a gamma-glutamyltranspeptidase. Furthermore, CapD is cleaved at the gamma-glutamyltranspeptidase consensus cleavage site, and the two subunits remain associated, as necessary for gamma-glutamyltranspeptidase activity. Other Gram-positive gamma-glutamyltranspeptidases are secreted, but CapD is located at the Bacillus surface, associated both with the membrane and the peptidoglycan. Polyglutamate is hydrolysed by CapD indicating that it is a CapD substrate. We suggest that CapD catalyses the capsule anchoring reaction. Interestingly, the CapD(-) strain is far less virulent than the parental strain.

https://onlinelibrary.wiley.com/doi/pdf/10.1111/j.1365-2958.2005.04718.x

Agnès Fouet

Papers

Bacillus anthracis, Bacillus cereus, and Bacillus thuringiensis—One Species on the Basis of Genetic Evidence

Poly-gamma-glutamate in bacteria

Bacterial SLH domain proteins are non‐covalently anchored to the cell surface via a conserved mechanism involving wall polysaccharide pyruvylation

Molecular characterization of the Bacillus anthracis main S‐layer component: evidence that it is the major cell‐associated antigen

Bacillus anthracis CapD, belonging to the gamma-glutamyltranspeptidase family, is required for the covalent anchoring of capsule to peptidoglycan.