Biogas as a renewable energy fuel – A review of biogas upgrading, utilisation and storage

A review of more than 60 studies (plus m4ore than 65 studies on P2G) on power and energy models based on simulation and optimization was done. Based on these, for power systems with up to 95% renewables, the electricity storage size is found to be below 1.5% of the annual demand (in energy terms). While for 100% renewables energy systems (power, heat, mobility), it can remain below 6% of the annual energy demand. Combination of sectors and diverting the electricity to another sector can play a large role in reducing the storage size. From the potential alternatives to satisfy this demand, pumped hydro storage (PHS) global potential is not enough and new technologies with a higher energy density are needed. Hydrogen, with more than 250 times the energy density of PHS is a potential option to satisfy the storage need. However, changes needed in infrastructure to deal with high hydrogen content and the suitability of salt caverns for its storage can pose limitations for this technology. Power to Gas (P2G) arises as possible alternative overcoming both the facilities and the energy density issues. The global storage requirement would represent only 2% of the global annual natural gas production or 10% of the gas storage facilities (in energy equivalent). The more options considered to deal with intermittent sources, the lower the storage requirement will be. Therefore, future studies aiming to quantify storage needs should focus on the entire energy system including technology vectors (e.g. Power to Heat, Liquid, Gas, Chemicals) to avoid overestimating the amount of storage needed.

/pdf/a-review-at-the-role-of-storage-in-energy-systems-with-a-3pe9h4h281.pdf

A review at the role of storage in energy systems with a focus on Power to Gas and long-term storage

Power-to-Methane is a concept that converts electrical into chemical energy using CO2 and H2O. The concept brings the possibility of connecting the power grid to different sectors, where CH4 is needed such as mobility and industry. In this review, a comprehensive overview of the state-of-the-art of Power-to-Methane is presented. The Power-to-Methane process chain is described in detail. Fundamentals of water electrolysis are highlighted and cell technologies are discussed and assessed. CO2 sources are pointed out, CO2 separation technologies are depicted and compared, and some separation projects worldwide are listed. Thermodynamics of methanation process is analyzed; catalysts and reactors used are descripted and evaluated. Finally, Power-to-Methane plants in operation and construction are addressed.

Power-to-Methane: A state-of-the-art review

Review of trends in biogas upgradation technologies and future perspectives

Life Cycle Assessment of Power-to-Gas: Approaches, system variations and their environmental implications

https://hal.archives-ouvertes.fr/hal-01519912/document

Alain Favre

Papers

Techno-economic and Life Cycle Assessment of methane production via biogas upgrading and power to gas technology