Thermophysical Properties Research Literature Retrieval Guide Edited by Y. S. Touloukian, J. K. Gerritsen and N. Y. Moore Second edition, revised and expanded. Book 1: Pp. xxi + 819. Book 2: Pp.621. Book 3: Pp. ix + 1315. (New York: Plenum Press, 1967.) n.p.

/pdf/heat-and-mass-transfer-1yaijfx8vp.pdf

Heat and Mass Transfer

COMMITTEE MANDATE Concern for crack initiation and growth under cyclic loading as well as unstable crack propagation and tearing in ship and offshore structures. Due attention shall be paid to practical application and statistical description of fracture control methods in design, fabrication and service. Consideration is to be given to the suitability and uncertainty of physical models. The work shall be coordinated with that of Committee V.2.

Fatigue and Fracture

Electrical propulsion is not a novel concept in marine systems. However, the availability of power electronic converters has proved to be the Key Enabling Technology for electrification of large ships. This paper starts with a summary of EP drives, which led to the birth of all-electric ships. Electric power generation and control systems are then presented, which make it possible to exploit the integrated electrical power system. To ease comprehension of the issues in designing such a system, its conventional design process is given. Then, the reasons that are pushing ahead the research in the shipboard power systems sector are discussed. The need for research in the design methods area is demonstrated through an overview of the latest results of technological research. Finally, a summary of the most significant results on the design tools research is given, including early stage design, dependable-oriented design, and the improvements achievable through software simulators and hardware-in-the-loop are discussed. The goal of this paper is to demonstrate why research on design methods is as important as a technological one, on the basis of the needs concerning the design, integration, and management of future “integrated electrical and electronic power systems” (power systems with power conversion quota approaching 100%).

All-Electric Ship Design: From Electrical Propulsion to Integrated Electrical and Electronic Power Systems

Static behavior of lattice structures produced via direct metal laser sintering technology

http://mss-nde.uoi.gr/publications-pdf/journal-papers/2013/2013-Rapid%20Evaluation%20of%20the%20Fatigue%20Limit%20in%20Composites%20Using%20IR%20Lock-in%20Thermography%20and%20AE.pdf

Rapid evaluation of the fatigue limit in composites using infrared lock-in thermography and acoustic emission

Fatigue analysis of butt welded AH36 steel joints: Thermographic Method and design S–N curve

Technology and science for the ships of the future

The paper deals with investigations about mechanical properties of Iroko, a hardwood species used for structures in shipbuilding as glued laminated timber. Experimental tests have been carried out ...

Experimental investigation on Iroko wood used in shipbuilding

This paper reports the experimental tests, which have been carried out to assess the mechanical properties of Iroko wood laminates used for the construction of a large wooden sailing ship. Three-point bending tests have been carried out on different types of specimens: laminates with 3 layers @ 0° and without scarf joints, laminates with 3 layers @ 0° having the outer layers with scarf joints, and laminates with 4 layers @ 0°/±45°/0° and no scarf joints. The tests have been performed in compliance with the current EN Standards. The analyses of the experimental data allowed the assessment of the mechanical properties of the laminated Iroko wood as well as the influence of scarf joints. The experimental results demonstrated that the presence of scarf joints only affect the strength of the glued laminate, while the stiffness properties in terms of Young modulus in bending and shear modulus, obtained applying the “method of variable support span”, remain essentially the same. The investigated laminates have been also analysed using a 3D computed tomography and an ultrasonic phased array equipment in order to assess the dimensions of possible defects or voids in the adhesive and the dynamic modulus of elasticity. The tomographic measurements of the glue thickness explained the reason of the reduced strength of the scarf joints, due to the inhomogeneity of the glue bond-line. The value of the dynamic modulus of elasticity, obtained by the ultrasonic technique, is slightly higher than the value of the modulus of elasticity obtained by the bending tests. Finally, the experimental findings have been compared with those drawn from both Classical Lamination Theory and Dietz approach, obtaining a good agreement and confirming that the Dietz approach is a fast and easy way to assess the elastic properties of a laminated structure.

Experimental and theoretical analyses of Iroko wood laminates

In order to improve the survival capability of passenger and ro-ro ships in event of fire or flooding, in the last few years a set of international Regulations has been issued. In particular, the Regulation SOLAS “Safe Return to Port” is addressed towards design criteria able to guarantee adequate functionality of the ship when a casualty occurs. The Regulation requires the evacuation of the ship when a given threshold of damage (i.e., fire and flood) is exceeded. The evacuation analysis has become of primary importance even in the early-stage design. Indeed, the new amendments to SOLAS Regulation II-2/13.3.2.7 makes the evacuation analysis mandatory for both new and existing passenger and ro-ro ships since the early steps of the project. In this paper, the current IMO Guidelines have been analysed, and a case study for the evacuation of a 3600-person cruise ship has been carried out by means of both a simplified and an advanced method. To perform advanced calculations, two different software, based on virtual reality, have been used and the results have been compared with simplified method ones.

/pdf/simplified-and-advanced-approaches-for-evacuation-analysis-10unm08e2x.pdf

Alberto Marino

Papers

Fatigue analysis of butt welded AH36 steel joints: Thermographic Method and design S–N curve

Technology and science for the ships of the future

Experimental investigation on Iroko wood used in shipbuilding

Experimental and theoretical analyses of Iroko wood laminates

Simplified and advanced approaches for evacuation analysis of passenger ships in the early stage of design